Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.2 LAccepted-AOC | L1 | Accepted-AOC 1st lowest bidder | |
| 2 | L2₹39.3 L+₹15,588 (0.40%)Rejected-AOC | L2 | Rejected-AOC 2nd lowest bidder | |
| 3 | L3₹40.0 L+₹86,282 (2.20%)Rejected-AOC | L3 | Rejected-AOC 3rd lowest bidder | |
| 4 | L4₹41.0 L+₹1.8 L (4.67%)Rejected-AOC | L4 | Rejected-AOC 4th lowest bidder | |
| 5 | L5₹41.1 L+₹1.9 L (4.83%)Rejected-AOC | L5 | Rejected-AOC 5th lowest bidder |
Tender Value
₹55.9 L
EMD Value
₹1.1 L
Closing Date
4 Nov 2024, 4:00 pmClosed
Executive Engineer, Township Division
Farakka Barrage Project, P.O. Farakka Barrage, Dist. Murshidabad, West Bengal, PIN 742212
As per tender document
2024_FBPF_832865_1
GM/FBP-36 of 2024-25
Open Tender
Civil Works
Item Rate
365 days
Farakka Barrage, Dist. Murshidabad
As per tender document
2 documents required · 2 mandatory
₹0
₹1.1 L
Yes
3 Mar 2025
29 Oct 2024
5 Nov 2024
29 Oct 2024
4 Nov 2024
29 Oct 2024
Amount
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge.
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture.M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel.10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. Anadditional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick pre laminated PVC door shutters.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm. with a single 15 mm C.P. brass pillar tap
Supplying, fitting and fixing pedestal of approved make for wash basin (white)
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
Supplying, fitting and fixing soap holder. PTMT (Prayag or equivalent)
Supplying, fitting and fixing towel rail with two brackets. C.P. over brass. 25 mm dia. and 600 mm long.
Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed. (a) Upto 20 users:-(ii) Beyond a lead of 150 metre and outside the Municipal limit.
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm.
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture.
Providing and fixing brass curtain rods of wall thickness 1.25mm with two brass brackets fixed with brass screws and wooden plugs etc.whwrever necessary complete 20 mm diameter
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red. Area of slab over 0.50 sqm
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
Supply of skilled supervisor
Supply of skilled sweeper mason
Supply of painter(skilled)
Supply of carpenter(skilled)
Supply of helper(unskilled)
Supply of Cement
Supply of Sand
Supply of stone chieps
Supply of Emulsion paint
Supply of Emulsion primer
Supply of synthetic primer
Supply of synthetic paint
Supply of teak wood chowkat/plank
Supply of Ply wood
Supply of CP brass bib cock
Supply of cistern
Supply of Cistern pipe
Supply of WC cover
Supply of Hand shower kit
Supply of Pillar cock
Supply of Waste pipe
Supply of Mirror
Supply of Godrej Duralock ultra XL+
Supply of Calling Bell
Supply of White cement
Supply of Water proof paint/coating
Supply of HDPE Water proof membrane
Supply of Hinge(6")
Supply of Screw (4")
Supply of tinted Glass 4mm thick
Supply of Clay Putty
Supply of Door stoper
Supply of Al Tower bolt (10")
Supply of Al Door hash bolt
Supply of Iron Nail
Supply of Hydraulic door closer
Supply of Two point nose steel handle
Supply of Steel peg stay
Supply of 5 lit instant water gyser
Supply of UPVC Vent pipe (3m)
Supply of UPVC Soil pipe(100mm dia)
Supply of 100 mm UPVC Elbow
Supply of Bricks
Supply of Exterior cement paint
Supply of Wall putty
Supply of SS Mosquito net
Supply of crack repair paste
OM CONSTRUCTION (BID ID -3115024)
RINKU KHAN (BID ID -3114915)
M/S. M. O. F.BUILDERS (BID ID -3114179)
Mangal Chandi Shramik Thikadari Samabay Samity Ltd (BID ID -3114398)
M/S ANJAN KUMAR GHOSH (BID ID -3114084)
JOY GURU CONSTRUCTION (BID ID -3114967)
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .