Bhuj Office Building

Providing and fixing double scaffolding system (cup lock type) on the exterior side, made with 40 mm dia M.S. tube 1.5 m centre to centre.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete.

Provision for Finishing walls with textured exterior paint of required shade Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm etc complete as per the direction of site incharge.

Providing interior Wall painting with 2 coats of acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour etc complete as per the direction of site incharge.

Provision for Wood Painting with 2 coats with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade and colour etc complete as per the direction of site incharge.

Provision Dismantling tile work of 10mm to 25mm thickness in floors and roofs laid in cement mortar includingDisposing the waste material 50 mts away from the site lead etc complete as per the direction of site incharge

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours as approved by Engineer-in-Charge, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge, In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) lead etc complete as per the direction of site incharge

Removal of existing WC and Wash basins of CA Office and Guest House and dumping of the waste material as required as per instruction of Site Incharge

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, W.C. pan with ISI marked white solid plastic seat and lid

White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers

Providing and fixing 15 mm nominal dia CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

Purchase of Havells 25L Storage Water Heater Geyser

Purchase and installation on top of the roof of 2000 ltrs sintex of approved quality etc complete as per instruction of site incharge

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing 40mm thick fine dressed stone flooring work laid over 20mm thick (average) cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade

Purchasing and installation of Lloyd 1.5 Ton 3 Star Inverter Split AC along with electric connection and as per instruction of site incharge.

Provision for removing the old electric connection completely and reconnection with new wire and pipe with the said LED bulb of Philips made including switched, wiring, etc complete

Provision for installation of CC camera including wiring, electrification, making the camera live etc complete as per the instruction of site incharge.

Provision for repairs to the roof of the office by dismantling the old tile and throwing the debries away from the monument

Provision for repairs to the roof of the office by dismantling the old tile and throwing the debries away from the monument and relaying Double charge polished Vitrified tiles of 600 x 600mm in with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc complete as per site incharge

Please Enable Macros to View BoQ information