Major Repair to Boys Middle School Goom Ahmadpora Pattan .

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages.

Providing and fixing colour coated galvalume High Rib profile sheets 0.50 mm TCT (Total coated thickness) having a crest height of 28-32 mm at 195 mm and effective width of 975-1000 mm and length to suit site requirements to the purlins using self drilling and self tapping fasteners of reputed make with purlin sheet using self drilling and self tapping fasteners and fixing flashings,valleys and ridges hips of colour coated galvalume plain sheet using using self drilling and self tapping fasteners of reputed make complete and as directed.All types of steel sheets shall be load tested to satisfy 1.1 times the design wind load and coating thickness to the satisfication of the site Engineer.the fasteners shall also be load tested including cost of ridges and hips of width 60 cm overall width plain colour coated sheets and valleys of 90 cm width overall of Pre-colour coated plain sheets of required size and thicknes complete 0.50 mm thick all inclusive.The Contractor has to submit design and drawing for approval on the sheet profile ,design and fabrication deatail before installation incld cost and carriage of all material involved from source to site of work.

Providing and applying white cement based putty 2 mm thick of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete incld.all carriages

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 40 mm thick with 20mm nominal size stone aggregate, including all carriages.

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class Imported kail wood including all carriages.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked including all carriages.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm), including all carriages.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and inluding priming coat with water thinnable cement primer including all carriages.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) and all carriages.

Taking of photographs of size 125mm x 100mm Pre Execution, During Execution, and Post Execution to be submitted with bill complete Job. (Geo tagged photographs showing Longitude and latitude)