GENERAL-Urgent maintenance of borewell motor , generator maintenance and other repairs at Rest house thalassery-Maintenance work at Rest house thalassery-General Electrical Work

Generator service

OD263225/2024-2025:Charges for routine servicing of 30 KVA generator .

OD263224/2024-2025:Charges for painting generator body.

OD263257/2024-2025:Charges for 1.5 HP borewell motor rewinding , bush replacement and reinstallation.

OD273075/2024-2025:Supply and fixing of foot valve flap type 1 inch .

OD273076/2024-2025:Supply and fixing of water level float switch .

OD273079/2024-2025:Supply conveyance installation testing and commissioning Single phase 0.5HP/0.37KW, 230 V, 50Hz, 2 pole, Monobloc Pump set confirming to IS capable to discharge a total head of 8 -18 mtr , 143- 24 LPM , Delivery size of 25 mm, as per IS specification as required. ( Deccan/Kirloskar Equivalent )

1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.55.3:Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

OD273958/2024-2025:Supplying and providing extra HG conduit down rod of 19 mm dia 1.00 m long with 16/0.20 mm 3 core copper conductor flex wire conforming to relevant ISS or with the extended original wiring and giving connection etc as required.

1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

90.3.19.3:Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture

90.3.20.3:Supply & installation of light fittings on TW round block <br> Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture

90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.3.17.1:Supply, conveyance and erection of the following sizes of 'B' class GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required.32 mm dia GI pipe

1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.

OD2502/2025-2026:Supply and providing the following types and power rated lamps in the existing fittings as required . LED Bulb 9W

OD2338/2025-2026:Supply , conveyance and installation of black body LED spot focus wall light with flexible rotatable light head with track way and metal body warm white colour . Make - Philips /Crompton / equivalent.

OD2364/2025-2026:Charges for heater repairing and servicing.

OD2403/2025-2026:Supply , conveyance , installation , testing and commissioning of exhaust fan in the existing opening , fixing necessary anchor bolts / bolt and nuts etc . as required including giving connections with the supplied wire along with the exhaust fan , making good the surface as required . 300 mm sweep light duty exhaust fan in metal frame.