PROVN OF MD ACCN FOR 08 OFFRs, 09 JCOs AND 16 ORs AT GANDHIDHAM MIL STN

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage (+ or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 26(R)

Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTH WORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 27

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 28

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 31(R)

Lump sum price worked out by the contractor for "ROAD, PATH & CULVERT" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 33

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 35(R)

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 37(R)

Lump sum price worked out by the contractor for "COMPOUND WALL, FENCING, GATE & DEVELOPMENT" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 40(R)(R)

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 41(R)

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 45(R)

Lump sum price worked out by the contractor for "DG SET" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 46

Sch 'A' PART-XII (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL WATER SUPPLY (OFFICERS QTR) S&F of 15 mm bore CP brass bib cock screwed for iron pipe of ferrule and fixed complete all as specified and directed. Make - Jaquar QUEEN SERIES Cat No QQT-7037 or technocommercial equivalent of any make specified in Appx 'B'.

S&F of 15 mm bore CP brass angular stop cock screwed for iron pipe of ferrule and fixed complete all as specified and directed. Make - Jaquar QUEEN SERIES Cat No QQT-7053 or technocommercial equivalent makes as per Appx 'B'.

S&F of CP wall mixer 3 in 1 system including 1.5 m long tele shower and overhead shower of size 150x150 mm with W.F. ISI marked complete all as specified and directed. Make - Jaquar QUEEN SERIES Cat No 7281 or technocommercial equivalent of any make specified in Appx 'B'.

S& F overhead shower 150x150 mm of ABS body crome plated with gray face plate with arm having swivel joint chromium plated complete all as specified and directed. Make - Jaquar QUEEN SERIES or technocommercial equivalent of any make specified in Appx 'B'.

S&F 15 mm bore CP cast copper alloy body mixer sink cock with hot & cold mixing valves & casted central spout complete all as specified and directed. Make - Jaquar QUEEN SERIES or technocommercial equivalent of any make specified in Appx 'B'.

S&F health foucet with 1200 mm long flexible mild steel tube 80 mm dia with wall hook complete all as specified and directed. Make - Jaquar QUEEN SERIES Cat No ALD-573 or technocommercial equivalent of any make specified in Appx 'B'.

S&F two way angle cock chromium plated fancy type 15 mm bore complete all as specified and directed. Make - Jaquar QUEEN SERIES or technocommercial equivalent of any make specified in Appx 'B'.

INTERNAL WATER SUPPLY (JCO's / OR's QTR) S&F of 15 mm bore CP brass bib cock screwed for iron pipe of ferrule and fixed complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'B'.

S&F of 15 mm bore CP brass angular stop cock screwed for iron pipe of ferrule and fixed complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'B'.

S&F of CP wall mixer 2 in 1 system with central spout and connection for overhead shower with divertor lever ISI marked complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'B'.

S& F overhead shower 100 mm dia of ABS body crome plated with grey face plate with arm having swivel joint chromium plated complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'B'.

S&F 15 mm bore CP cast copper alloy body mixer sink cock with hot & cold mixing valves & casted central spout complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'B'.

S&F two way angle cock chromium plated fancy type 15 mm bore complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent of any make specified in Appx 'B'.

INTERNAL ELECTRIFICATION S&F decorative mirror type LED tube light fitting 1x20 watt with surge protection not less than 4 KVA, luminous efficiency more than 100 Lumen/Watt, minimum 50000 burning hours, CRI > 80 including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with three core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed. Make: Cat part no- HAVELLS: LUMILINES9WLED865PCWH or technocommercial equivalent of any make specified in Appx 'B'.

S&F T.V./Telephone Socket Outlet, including M.S. Box of size 100x100x65 mm with cover plate complete all as specified and directed

S&F decorative box type LED tube light fitting 1x20 watt including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with three core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed. Make: Cat part no- LTT8-20 for LED tube and DMLN1LT8-16 for batten of crompton or technocommercial equivalent of any make specified in Appx 'B'.

S&F heavy duty, exhaust fans of 250 mm sweep suitable for SP 230/250 volts, 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including three core twisted flexible copper conductor cable of 1.0 sq. mm size cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed. Make: VENTILUS of Crompton or technocommercial equivalent of any make specified in Appx 'B'.

S&F heavy duty, exhaust fans of 300 mm sweep suitable for SP 230/250 volts, 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including three core twisted flexible copper conductor cable of 1.0 sq. mm size cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed. Make: VENTILUS of Crompton or technocommercial equivalent of any make specified in Appx 'B'.

S&F ceiling fans 1200mm sweep energy efficient five star rated incl down rods and connecting up with three core twisted flexible copper conductor cable of 1.0 sq. mm size cable with multistranded copper conductors IS 694 marked, from ceiling rose to fan complete all as specified and directed. Make: Empower50 of Crompton or technocommercial equivalent of any make specified in Appx 'B'.

S&F energy saving 9 Watt LED bulb omplete all as specified and directed.

Supplying, installation , testing and commisioning , factory made, CPRI approved LT panel, wall mounted board made of CRCA sheet of 2 mm thick indoor type totally enclosed weather, dust and vermin proof, with front opening hing door and locking arrangment mounted on suitable MS flat Iron panel body duly grouted on wall, 415 Volts 3 Phase, 4 wire AC 50 HZ having Aluminium bus bar 20 mm x 10 mm for phase and netural insulated with PVC sleeves, space for fixing single phase KWH eletric meter of suitable capacity 04 Nos. copper lugs , spacers, mounting channels, rubber gasket, locking knobs, hylam sheet pieces, PVC shrinkable sleeves, nuts and bolts, washers etc, and suitable size single core copper wire connections, suitable compartmnets and epoxy powder spray paint with primer complete including S&F smart single phase two wire dual source prepaid energy meters BIS 15884 and IS 16444 2015 (Readdirmed 2020) marked in existing meter board/floor panels with pre payment capacity touch keypad based digital having current range 10-60 Amp 240 volts accuracy class 1.0 alongwith parellel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual sorce registration with grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tarrif slabs, happy hours and holiday definition all as specified by Engineer-in-Charge and consisiting of following accessories:

INCOMING: (a) TPN MCB 63 amp 415 volts, 25 KA breaking capacity-01 No (b) R-Y-B-phase LED indicating lamp-03 Nos (c) 100 Amp TPN main aluminum bus bar-outgoing (d) MCB SPN 40 Amp 10 KA-04 Nos (e) copper cable 6 sqmm wire and open terminals for all feeders and provide 2 Nos earth link on both side.. Note: Qtr No to be mentioned in respective meter on acrylicplate

Supplying, installation , testing and commisioning , factory made, CPRI approved LT panel, wall mounted board made of CRCA sheet of 2 mm thick indoor type totally enclosed weather, dust and vermin proof, with front opening hing door and locking arrangment mounted on suitable MS flat Iron panel body duly grouted on wall, 415 Volts 3 Phase, 4 wire AC 50 HZ having Aluminium bus bar 20 mm x 10 mm for phase and netural insulated with PVC sleeves, space for fixing three phase KWH eletric meter of suitable capacity 04 Nos. copper lugs , spacers, mounting channels, rubber gasket, locking knobs, hylam sheet pieces, PVC shrinkable sleeves, nuts and bolts, washers etc, and suitable size single core copper wire connections, suitable compartmnets and epoxy powder spray paint with primer complete including S&F smart three phase four wire dual source prepaid energy meters BIS 15884 and IS 16444 2015 (Readdirmed 2020) marked in existing meter board/floor panels with pre payment capacity touch keypad based digital having current range 10-60 Amp 415 volts accuracy class 1.0 alongwith parellel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual sorce registration with grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tarrif slabs, happy hours and holiday definition all as specified by Engineer-in-Charge and consisiting of following accessories:

INCOMING: (a) TPN MCCB 63 amp 415 volts, 25 KA breaking capacity-01 No (b) R-Y-B-phase LED indicating lamp-03 Nos (c) 100 Amp TPN main aluminum bus bar-outgoing (d) MCB TPN 40 Amp 10 KA-04 Nos (e) copper cable 6 sqmm wire and open terminals for all feeders and provide 2 Nos earth link on both side. Note: Qtr No to be mentioned in respective meter on acrylicplate

M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 4 Sqmm and one run of 4 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge. NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length.

M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge. NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length.

M&L for sub main wiring with four runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and two run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH (RYBN) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 32 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge. NOTE: Four runs of cable with two run of earth wire and one run of PVC conduit shall be measured & paid for as one length.

S&F LED Security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 10 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT3000-6000 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistaranded copper conductor sheathed cable of size 1.0 SQMM fixed with & copper conductor sheathed cable of size 1.0 SQMM fixed with & including bracket made of GI Pipe 25mm bore light grade, 1.2 Mtr long bent to shape required with 2 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed. Cat No: LSTS-30-CDL of Crompton or technocommercial equivalent of any make specified in Appx 'B'.

Note for item No 38.00: (1) The LED lights shall have gurantee for 5 Years from date of completion of contaract , any defects noticed during this period shall have be rectified / Parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NABL.

S&F smart single phase two wire dual source prepaid energy meters BIS 15884 and IS 16444 2015 (Reaffirmed 2020) marked in existing meter board/floor panels with pre payment capacity touch keypad based digital having current range 10-60 Amp 240 volts accuracy class 1.0 alongwith parellel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual sorce registration with grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tarrif slabs, happy hours and holiday definition.

S&F smart three phase four wire dual source prepaid energy meters BIS 15884 and IS 16444 2015 (Reaffirmed 2020) marked in existing meter board/floor panels with pre payment capacity touch keypad based digital having current range 10-60 Amp 415 volts accuracy class 1.0 alongwith parellel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual sorce registration with grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tarrif slabs, happy hours and holiday definition.

S&F 25 litrs capacity geyser storage type 5 star rating with necessary holes in walls with driling machine and grouting foundation nuts and bolts in wall and doing necessary connecting work and making all elctrica;l connections complete all as specified and directed.

ROAD, PATH & CULVERT M&L for 150 mm thick WMM (Wet Mix Macadam) (compacted thickness) in two layers conforming to grading given in table 400-13 & physical requirement given in table 400-12 spread by mechanical means & rolled by using 8-10 ton vibrator power roller over compacted surface of soling as specified in clause 406 3.5 of MORTH specification and necessary lateral support and formwork if required complete all as specified and directed.

M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows tec. and the like n. exc. 15 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS 3262-1989 with 20% glass beds (intermixed) spread and laid by automatic mechanical machine engine at approximate temprature 160 dfegree celcius with special applicator machine as per manufacturers instruction complete all as specified and directed.

SEWAGE DISPOSAL M&L for construction of RCC Septic tank 150 users capacity designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-35 (Design mix) in walls, base slab, baffle walls and roof slab including beams etc. with manhole openings with cover, connection etc complete all as specified and shown on Drg No CEJZ/STR/25-G/2021 sheet 1R/2 to 2R/2.

M&L for construction of RCC Septic tank 50 users capacity designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-35 (Design mix) in walls, base slab, baffle walls and roof slab including beams etc. with manhole openings with cover, connection etc complete all as specified and shown on Drg No CEJZ/STR/25-G/2021 sheet 1R/2 to 2R/2.

M&L for seepage pit upto 150 users of size 4.0 m dia and 4.0 m effective depth/height with 30 cm thick stone masonry wall and stone rubble filling complete all as per Drg No CEJZ/TD/68/15 sheet 1/4 to 4/4 complete all as directed and specified.

M&L for seepage pit upto 50 users of size 5.0 m dia and 4.0 m effective depth/height with 30 cm thick stone masonry wall and stone rubble filling complete all as per Drg No CEJZ/TD/68/15 sheet 1/4 to 4/4 complete all as directed and specified.

EXTERNAL WATER SUPPLY Supply, laying, connecting, jointing and testing ductile iron pressure pipe of size 100 mm dia, ISI marked to IS-8329-2000 Reaffirmed Edition 4.1 suitable for "push on joints" in standard working lengths supplied with rubber gasket duly ISI marked for water supply, Class K-9 with socket and with cement mortar lining inside the metalic zinc coating with finishing layer of bituminious paint on outside the pipe without polythelene sleeves but including "push on joints" supplied with ISI marked EPDM rubber gasket conforming to IS-5382-1985 (Reaffirmed-2003) with dual hardness of type 2 (bulb) and type-5 (Heel) quality laid in tenches complete all as specified & directed.

Supply, laying, connecting, jointing and testing ductile iron pressure pipe of size 80 mm dia, ISI marked to IS-8329-2000 Reaffirmed Edition 4.1 suitable for "push on joints" in standard working lengths supplied with rubber gasket duly ISI marked for water supply, Class K-7 with socket and with cement mortar lining inside the metalic zinc coating with finishing layer of bituminious paint on outside the pipe without polythelene sleeves but including "push on joints" supplied with ISI marked EPDM rubber gasket conforming to IS-5382-1985 (Reaffirmed-2003) with dual hardness of type 2 (bulb) and type-5 (Heel) quality laid in tenches complete all as specified & directed.

Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe 100 mm ISI marked (IS:14846:2000) having S.S. spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc all as specified and directed.

Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe 80 mm ISI marked (IS:14846:2000) having S.S. spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc all as specified and directed.

Supplying, fixing and testing of DI pipe fittings for spigot socketed pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing/ decreasing or double socket etc). Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket and spigot), collars, caps and plugs, for pipe complete all as specified & directed.

S&F Foot valve with flanged ends conforiming to IS-4038 of size 100 mm dia complete all as specified and directed

Supply, install, test and commissioning self priming centrifugal pumpset 10 HP Foot mounted (B3), Fan cooled motor suitable for 415V,3 phase,50 Hz,insulation class F,ambient of 50 C conforming to IS 12615:2011,IEC 60034-30-2008 and IP 65 protection, base plate, platform as per manufacturer drg complete all as specified and directed.

M&L for delivery header 150mm dia DI pipe, connecting the pump delivery pipes to header including supporting structure for header pipe complete all as specified and directed.

S&F cast iron air valves with double action air outlets, confirming to IS 14845 of size 100 mm bore and fixing up in cast iron water supply mains of size 100 mm dia complete all as specified and directed.

S&F cast iron Non Return Valve, confirming to IS 5312 of size 80 mm bore and fixing up in cast iron water supply mains of size 80 mm dia complete all as specified and directed.

M&L for Construction of new PCC solid Masonary valve chamber of size 450 X450 X 450 mm (Internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick 150 mm wide off sets alround over 100 mm thick hard core , 200 mm thick PCC solid block walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/Dense soil 3 mm thick MS sheet cover fixed on 50 mm X 50 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coaping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

M&L for Construction of new PCC solid Masonary valve chamber of size 1000 X 800 X 1000 mm (Internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick 150 mm wide off sets alround over 100 mm thick hard core , 200 mm thick PCC solid block walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/Dense soil 3 mm thick MS sheet cover fixed on 25 mm X 25 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coaping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

S&F Water level Sensor suitable for 50000 Gln water Capacity Over head Tank, Type-Hydrostatic, Range-0-4 Meter, Output-4 to 20 Mili Amp complete all as specified and directed.

S&F Water level indicator 7 segment, 4 digit LED display, Input 4 to 20 Mili Amp, Power Supply-230 Volt AC complete all as specified and directed.

EXTERNAL ELECTRIFICATION Supply, install, test and commisioning copper wound step down transformer, Level 3 ,outdoor type, including plinth PCC platform complete with stranded fittings, ONAN, Vector group DYN11, HT 11 KV, 3 phase, LT, 433 Volts 3 Phase, 4 wire all as per IS 1180 ( Part- I ) : 2014 and designed on minimum 5 star rating with EEL 03 as per the direction of Accepting Officer consideration with off load tapings on primary side to vary secondary voltage +/- 5% with taping at every +/- 2.5% of capacity 100 KVA complete all as specified and including the following:-

(a) Three Nos porcelain bushings HT 11 KV with bushing rods,nuts and washers inside cable end box. (b) One cable box LV side consisting of 4 nos porcelain with brass bushing rods, complete with nuts and washers with two nos cable gland suitable size (c ) Oil conservator with filler type drain valve and oil level gauge. (d) Dehydrating breather with fast fill of dehydrating agent. (e) Explosion vents. (f) Thermometer pocket on tank cover (g) Rating plate and terminal marking plate. (h) The earthing terminal two Nos to tank to faciliate fixing of earth strip. (j) Oil filling hole with cap/plug with connection plate complete. (k) Lifting hook (l) Oil level gauge and oil drain filter valve (m) Air relief valve plug. (n) Detachable rollers ( four Nos) (o) Initial filling to transformer oil.

Supply, install, testing and commissioning of feeder pillar box CPRI Approved outdoor type of suitable size with modular compartment and openable doors made out of MS angle iron frame & MS sheet of 3.00 mm thick with doublee door incl locking arrangements with bases frame and fixing arrangement duly painting with aluminium bus bar 320 Amps 3 phase 4 wire system with heat shinkable coloured sleeves comprising of the following with earth terminal incl necessary foundatiion work and suitable cable glands for incoming and outgoing cables. (location - Offr Md Accn Main Panel )

Supply, install, testing and commissioning of feeder pillar box CPRI Approved outdoor type of suitable size with modular compartment and openable doors made out of MS angle ior frame & MS sheet 3.00 mm thick with double door incl locking arrangements with bases frame and fixing arrangement duly painting with aluminium bus bar 200 Amps 3 phase 4 wire system with heat shinkable coloured sleeves comprising of the following with earth terminal incl necessary foundatiion work and suitable cable glands for incoming and outgoing cables. (Location - Offr Sub Panel 01)

Supply, install, testing and commissioning of feeder pillar box CPRI Approved outdoor type of suitable size with modular compartment and openable doors made out of MS angle ior frame & MS sheet 3.00 mm thick with double door incl locking arrangements with bases frame and fixing arrangement duly painting with aluminium bus bar 700 Amps 3 phase 4 wire system with heat shinkable coloured sleeves comprising of the following with earth terminal incl necessary foundatiion work and suitable cable glands for incoming and outgoing cables. (Location -OR main panel)

Supply, install, testing and commissioning of feeder pillar box CPRI Approved outdoor type of suitable size with modular compartment and openable doors made out of MS angle ior frame & MS sheet 3.00 mm thick with double door incl locking arrangements with bases frame and fixing arrangement duly painting with aluminium bus bar 150 Amps 3 phase 4 wire system with heat shinkable coloured sleeves comprising of the following with earth terminal incl necessary foundatiion work and suitable cable glands for incoming and outgoing cables. (Location - For OR sub panel )

Supply, install, testing and commissioning of feeder pillar box CPRI Approved outdoor type of suitable size with modular compartment and openable doors made out of MS angle ior frame & MS sheet 3.00 mm thick with double door incl locking arrangements with bases frame and fixing arrangement duly painting with aluminium bus bar 100 Amps 3 phase 4 wire system with heat shinkable coloured sleeves comprising of the following with earth terminal incl necessary foundatiion work and suitable cable glands for incoming and outgoing cables. (Location - For JCO sub panel )

Supply, install, testing and commissioning of feeder pillar box CPRI Approved indoor type of suitable size with modular compartment and openable doors made out of MS angle ior frame & MS sheet of 2 mm thick with single door incl locking arrangements with bases frame and fixing arrangement duly painting with aluminium bus bar 100 Amps 3 phase 4 wire system with heat shinkable coloured sleeves comprising of the following with earth terminal incl necessary foundatiion work and suitable cable glands for incoming and outgoing cables. (location-PH Panel)

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to and including earth lead of galvanized strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion and excavation and earth work in any type of strata, PCC 1:3:6 type C1 in chamber, precast RCC cover 50 mm thick in cement concrete 1:2:4 type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4 Kg/Sqm) with cast iron frame, funnel with wire mesh, 20 mm bore GI pipe medium grade watering pipe, lugs, 40 mm bore GI pipe medium grade protection pipe up to 7.5 m. NOTE: Item includes the cost of earth lead and GI protection pipe up to 7.5 m. GI strip and protection pipe beyond 7.5 m shall be measured and paid for separately.

M&L for earthing complete with galvanised steel earth electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than 1.5 m below ground level connected to and including GI earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

S&F of LED aviation light for die cast aluminium housing with red polycarbonate dome for illumination, integral driver, IP 65 and super flux 5mm 302 nos LEDs incorporated, Input voltage 100-270 Volts AC, life time 50000 Hrs complete all as specified and directed.

S&F mounting bracket made out of medium grade GI tubing 25mm bore 1.2 M long & bend to shape including 02 Nos MS Clamps, Nut Bolts, Washers etc complete all as specified and directed.

S&F for circuit wiring from junction box to LED Street light fitting alongwith earth wire of FR PVC insulated copper conductor of size 2x1.5sqmm +1x1.5 Sqmm earth wire with steel conduit suitable size,single core cable in surface as required complete all as specified and directed.

S&F Weather Proof PVC Junction Box made out of not less than 2 mm thick of size 250x200x100 mm (approx) complete with hinged door locking arrangement and consisting of 01 No panel mounted connector 4 pole 32 A - 01 No MCB SP 06 Amps 10 KA - 01 No incl 02 Nos Cable Glands suitable for inserting cable not less than 50 sqmm with 02 No 01 mm GI plate (150x50mm) having two holes as per the size of cable glands, fixed with cable gland for earth connectivity confirming to IP 65 complete including fixing on street light pole with MS Clamps, bolts, nuts and washers complete all as specified and directed.

M&L for cable route indicator shown "HT UG cables" painted in brown colour and root of cable with aero made of CI in suitable eleiptical shape and fixed in MS rod 12mm dia 70 cm long ( all word embosed) and embaded in PCC block of size 30 x 30 x 60cm in ground complete all as specified and directed.

Supply, installation, commissioning and testing of company make Automatic Power Factor Correction (APFC) Panel for 3 Phase, 415 V & 50 Hz system of capacity 30 KVAR in 5 steps (10 KVAR fix compensation + 5 KVAR x 4 Nos) complete with relays, capacitor banks for automatic operation to power factor above 0.95. The panel should be complete with TP air break contacts of capacitor contacts of duty with suitable swicthgear, MPP heavy duty shunt capacitor impregnatd, having rated voltage of 440 V type with internal electrical swicth gear each element as per IS 13340-1993/IS 13341-1992, IEC 60831 Part I & 2 of outdoor type double door (KIOSK type) complete with interconnections with suitable size of copper wiring, PVC insulated unarmoured cable and PVC sheath etc as required. The panel shall be made out of 3.15 mm thick CRCA shett powder coated with angle frame of size 50X50X6 mm cubical type including interconnetion wiring, indicating lamps etc confirimng to IP 42 specifications including grounding of panel as per electrical standards, electrical connections shall be made by using proper thimbles/lugs, cable gland complete all as specified and directed as follows:

OUTGOING: (a) Accessories for 10 KVAR fixed compensation capacitor bank - MCB, TP, 20 Amp, 10 KA, D curve. (b) Accessories for 10 KVAR capacitor bank - capacitor duty contactor (AC6b) 10 KVAR with damping resistors which limit xinrush current, 440 volt, 3 ph, 50 Hz, coil-220 lac & MCB TP 20 Amp, 10 KA, D curve. Note:- (a) Ventilating fans of required size to dissipate the heat liberated by capacitor units complete with automatic swicthing ON and OFF of fans depending upon the temperature of panel, 230 V AC, 2650 RPM, 160 Cum/h, flying leads. Panel shall have silicon based fire/heat resistance coating. fire retarding DMC/SMC filling for the opening around the busbar near to the sectional barriers and door interlocking for all compartments - 01 lot. All Accessories pre wired with suitable size copper conductor cable insulated with fiber glass insulation to with stand. (b) high temperature, housed in cubical panel (CPRI approved) made out of 3.15 mm thick MS sheet factory made duly powder coateed front and rear door open able with locking arrangement complete with foundation as required or recommended by manufacturer.

M&L for connecting and shifting of transformer 200 KVA from E/M store yard to site location and connecting HT and LT cable on plinth complete all as specified and directed.

DG SET Supply install testing and commissioning of Diesel engine driven genrating set 415 Volts, 3 Phase 4 wire, engine as per IS : 10001/10002 and alteranator as per IS 13364 with inbuilt AMF panel as per details given hereinafter complete with foundation as per design, control panel with necessary meter and sound proof canopy as per CPCB norms of capacity 15 KVA. Tools and spares complete all as specified and directed and comprising of the following :-

(a) Engine:- Diesel engine,direct injection, water cooled 21 BHP @ 1500 RPM for continuous duty of suitable for 15 KVA alternator with provision of 10% over load for one hour in every 12 hour running confirming to BS 5514/ISO 3046 standard. Totally enclosed, electric start, compression ignition,4 cylinder, inline, 4 stroke. The engine shall consists of following specification :- The scope of supply includes: -Electrical starter motor 12V DC, Battery charging alternator - Turbo charger, pulse tuned exhaust manifold, stainless steel exhaust flexible connection -Radiator cooling,with turbo charged after cooling -Mechanical Fuel injection Pump -Electronic Governor -Dual spin-on fuel filter -Spin-on full flow lub oil filter -Residential silencer -Dry type air cleaner -Recovery bottle -Shut-off coil with safeties for LLOP/HWT -Flywheel and flywheel housing to suit single bearing alternator

(i) Alternator suitable for operation at 1500 RPM, 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire system, conforming to BS 5000 / IS 4722. The Alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator has the following features: -+ 1.0 % Voltage regulation (max.) in static conditions -IP: 23 Enclosure -Permissible overload of 10% for one hour in 12 hours of operation as per standards (ii) Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. The steel shall be TESO / SAIL or equivalent make (iii) Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for a weather-proof, long lasting finish. The control panel consists of following parts: -Standard engine instrumentation -Multi function meter which measures: 1) Individual phase current (Amps) 2) Phase voltages (V) 3) Generator output frequency (Hz) 4) Engine water temperature (Deg.C) 5) Lube oil pressure (kg/cm2) and equipped with hour counter -MCCB of suitable rating -Key switch -Push button (Starter) -LED: Battery charging alternator fail indication -Current transformers -Instrument fuses duly wired and ferruled

(iv) Others:- Fuel tank suitable for 8 hours of operation -One charged battery 12V, suitable rating AH with battery leads & cable Acoustic enclosure:- The acoustic enclosure is made of 1.6/ 2 mm thick CRCA sheets and structural/ sheet metal base frame duly painted. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75 dBA at 1mtr sound levels specified by Ministry of Environment & Forest. The enclosure has the following features: -Specially designed to meet stringent MOEF/ CPCB norms of 75 dBA @ 1mtr at 75% load under free field conditions, -Single point lifting for easy handling, -Designed to have optimum serviceability -Air inlet louvers specially designed to operate at rated load, -Made on special purpose CNC machines for consistency in quality and workmanship, -Powder coated for long lasting service life and superior finish, -With UV resistant powder coating, can withstand extreme environments, -Use of special hardware for longer life, -Insulation material meets exacting IS 8183 specifications for better sound attenuation, -Flush styling - no projections, -Fluid drains for lube oil and fuel, -Fuel filling point. (v) One set of accessories (As per manufacturer's instructions) :- (a) Level indicator on fuel tank (b) Drain plug (c) MS class "C" piping, suitable dia and length for fuel inlet from tank to engine as per manufacturers instructions. (d) Fuel strainer and fuel tank with air vent. (e) Battery heavy duty 12 Volts lead acid type fully charged, indication of high flow charging changed. - 01 Nos (f) Cable connection from alternator to DG set control panel as directed

Surface excavation in any type of soil not exceeding 30 cm deep and averaging upto 15 cm and removing upto a distance n exc 50 metre filling back/apreading with red earth of 15 cm thick mixed with farm yard treating the soil with pesticides (i.e. Bavitin and neam cake BHC 10% Linson dust Thimment and Phorate , super and vermi compost in ratio (1:3) incl turfing/laying of (Bermuda grass ( Cynodon dactylon), Buffalo grass (Stenotaphrum secundatum) & Korean lawn grass (Zoysia japonica) ready made of approved quality turfs side by side without undualatoin/depressions and ramming the surface complete all as directed by Engineer-in-charge.

Digging of pit n. Exc. 0.25 cum in any type of soil incl removal and fillinf back to pit with suitable growing media like red earth by treating with farm yed manure in the ratio (3:1) fertilizers and pesticides (i.e. Bevation and neem cake BHC 10% linson dust.Thimment or phorate , manures super and vermicompost) and making up the trenh area to proper level including supplt and planting tree plants of species of height not less than 3 ft such as neem (Azadirachta indica), Gulmohar (Delonix regia), Peepal tree (Ficus religiosa), Banyan (Ficus benghalensis), Pink Cassia (Cassia javanica) as approved by GE etc as directed by Engineer-in-charge.

All as per item no. 80.00 hereinbefore but decorative plants Such as Christmas tree (Araucaria heterophtlla), Golden Cane Plam(Dypsis lutescenes), Royal Palm (Roystonea regia), Foxtail Palm (Wodyetia bifurcata)& False Ashoka (Monoon longifolium) as directed by Engineer-in-charge.

Maintenance of planted trees and lawn area grass for two year after certified date of completion issued by GE, by employing one experienced mali per day. The maintenance shall includes the following. (a) Periodical de-weeding of unwanted vegetation growth around the plants/lawn area (b) Watering all thetrees/plants/grass and soil with required for proper growth. (c) Periodical prunning the shrubs. (d) periodical lawn mowing. (e) Treating the trees/plants grass and soil with required quantity of approved manure, pesticides and fertillizer including necessary toping of red earth. (f) Replacement of dried/dead plants/grass/trees. (g) Hose pipe to be arranged by the contractor. (h) water shall be supplied by Deptt only for watering to plants.

Provn of M.S. Tree Guard 1.50 Mtrs high above with MS wiremess of size 78 x 37 mm and 2 mm dia of wire and MS angle iron 20 x 20 x 3 mm verticals (3 Nos) & MS flats 14 x 3 mm around the tree guard (3 Nos top, middle and bottom) equally spaced and embedded vertical angles in PCC 1:3:6 Type B-1 including excavation in post holes and removal of excavated material to a n.exc 5 mtr and applying to coats of synthatic enamel paint including one coat of red oxide primer to tre guard and all as specified and directed

M/s Matadeen Ramchandra Agarwal

DHARIWAL TRADERS PRIVATE LIMITED

RAGHUSONS INFRA ENGINEERING PVT. LTD

M/s Mohata Buildcon

Vijay Construction Co

Hi Tech Transpower Pvt Ltd

Hariom Projects Pvt Ltd