CANNING OF STEEL AND WOODEN FURNITURE AT AF STN BHUJ

Amount

Taking out unserviceable under mentioned components/parts for repair to Chair Easy by replacing with new ones complete all as specified and directed by Engineer-in-Charge as shown on drawings. Drg No FD-229

Front leg made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-229

Rear leg made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-229

Side rail made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-229

Front and back rail made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-229

Arm rest made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-229

Taking out unserviceable under mentioned components/parts for repair to Chair Dining by replacing with new ones complete all as specified and directed by Engineer-in-Charge as shown on drawings. Drg No FD-279

Front leg made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-279

Rear leg made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-279

Side rail made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-279

Front and back rail made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-279

Stiffener made of 1st class hard wood (teak wood) of size as shown on std drawing. Drg No FD-279

Back rest stiffener made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-279

Taking out unserviceable under mentioned components/parts for repair to Chair Writing by replacing with new ones complete all as specified and directed by Engineer-in-Charge as shown on drawings. Drg No FD-280

Front leg made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-280

Rear leg made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-280

Side rail made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-280

Front and back rail made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-280

Stiffener made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-280

Back rest stiffener made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-280

Arm rest made of 1st class hard wood (teak wood) of size as shown on drawing.Drg No FD-280

Taking out unserviceable under mentioned components/parts for repair to Stool Dressing by replacing with new ones complete all as specified and directed by Engineer-in-Charge as shown on drawings. Drg No FD-252

Leg made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-252

Long rail made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-252

Short rail made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-252

Stiffener made of 1st class hard wood (teak wood) of size as shown on drawing. Drg No FD-252

Re-canning of all type of chairs, stool dressing except chair verandah with 2mm to 2.5mm wide cane plastic white colour, half round, closely woven as per Godrej pattern including removal of existing cane complete all as specified and directed by Engineer-in-Charge. Drg No FD-229, 279, 280, 252

Material & labour for preparation of old polished wooden surfaces by sand paper and applying one coat of french polishing on all exposed surfaces complete all as specified and directed by Engineer-in-Charge :-

Chair Writing Drg No FD-280

Chair Easy Drg No FD-229

Chair Dining Drg No FD-279

Stool dressing CB FD-252

Complete removal of existing paint from chair verandah by scraping and rubbing with abrasive cloth and applying two coats of synthetic enamel white paint over and including a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. Drg No FD-359

Removing unserviceable rubber shoe of chair verandah and providing new hard rubber shoe in white colour as per sample kept with BSO yard complete all as specified and directed by Engineer-in-Charge. Drg No FD-359

Removing unserviceable seat & back of chair verandah and supplying and fixing new PVC seat & back of 4mm thick sheet of PPCP material weight not less than 1.85 Kg suitable for chair verandah, white colour of approved quality as per sample kept with BSO yard complete all as specified and directed by Engineer-in-Charge. Drg No FD-359

Removing unserviceable members of chair verandah and providing new members made out of MS pipe 18/19mm dia having wall thickness 1.6 mm and 470mm long with gas welding complete all as specified and directed by Engineer-in-Charge. Drg No FD-359

Repairing to chair dining (MAP) by replacing the under mentioned u/s components/parts with new ones complete all as specified and directed by Engineer-in-Charge all as per drg. Drg No. FD/MAP-II/05

Replacement of stiffeners made of first class hard wood of size 20x25mm (teak wood) all as per drg. Drg No. FD/MAP-II/05

Front leg made of first class hard wood (teak wood) of size as shown on drg. Drg No. FD/MAP-II/05

Rear leg made of first class hard wood (teak wood) of size as shown on drg. Drg No. FD/MAP-II/05

Side rail made of first class hard wood (teak wood) of size as shown on drg. Drg No. FD/MAP-II/05

Front and back rail made of first class hard wood (teak wood) of size as shown on drg.Drg No. FD/MAP-II/05

Back rest stiffner made of first class hard wood (teak wood) of size as shown on drg. Drg No. FD/MAP-II/05

Removing u/s PVC seat from chair dining & providing new PVC seat 4mm thick of PPCP material and weight not less than 0.50 Kgs with perforated holes and shall be fixed inside the frame of seat with proper screws as per sample approved by Engineer-in-charge. Drg No. FD/MAP-II/05

BED HARD WITH PLYWOOD TOP:- Removing following old and unserviceable parts / components of “Bed Plywood Top” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & complete all as specified and directed by Engineer-in-Charge. (Drg No FD 246, 247)

Head rest complete.

Foot rest complete.

Plywood top with 12 mm thick BWR commercial.

Long rail of first class hard wood (teak wood).

Short rail of first class hard wood (teak wood).

Both side veneered of Head Rest.

Both side veneered of Foot Rest

SK INDUSTRIES

Pratik Enterprise

motwani and associate

Sanjay Enterprise