KOR Gundlakamma Reservoir Project

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and 1m additional lift charges over the initial depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work including seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental ,labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. BLD-CSTN-3-5

Random Rubble stone masonry in CM (1:8) prop: (Cement: Sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering shuttering for foundations footings BLD-CSTN-3-13

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering shuttering for Pedastals BLD-CSTN-3-13

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering shuttering for Plinth beams BLD-CSTN-3-13

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering shuttering for Columns BLD-CSTN-3-13

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering shuttering for Lintels BLD-CSTN-3-13

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering shuttering for Roof beam BLD-CSTN-3-13

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering shuttering for Roof slab BLD-CSTN-3-13

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering shuttering forSunshades BLD-CSTN-3-13

Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work (APSS NO.309&310) (BLD-CSTN-2-9)

Brick masonry for panel walls 230 mm thick in superstructure with CM (1:6) proportion using second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 kg/sqcm including cost and conveyance of all materials like cement, sand, bricks water etc. to site, including seigniorage charges, sales and other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc. and overheads and contractor's profit complete for finished item of work BLD-CSTN-3-1 iv

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).BLD-CSTN-10-25

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement,sand,water etc., to site, including seigniorage charges and other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar,finishing ,scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., complete for finished item of work. (SS 901,903 & 904) for External walls and internal walls.

Flooring with 18 mm to 20 mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like Cheeta Brown / Jasmine Red / Multi red colour) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges, cost of base coat and overheads & contractors profit complete for finished item of work (S.S 701 & special).

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for bars below 36mm dia including over laps and wastage,where they are not welded including cost and conveyance of steel, binding wire etc., lifting charges of steel , placing in position, tying with binding wire, all tools etc., and Overheads & Contractors profit complete for finished item of work [BLD-CSTN-4-1]

Painting to new walls with 2 coats of Plastic Emulsion paint paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls (APSS No. 912). in All Floors.Supply of synthetic polymer luxury plastic emulsion paint of superior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter MAT-01094, BMT-J.22 (BLD-CSTN-12-5) (172) (187)

Providing and fixing 80 MM thick steel Door SMFK 104-s.sof width 2.05m and height 1.22 m incluing transportration and instalation at site,overheads & contractors profit complete for finished item of work for door of size 1.22m x 2.05 m. As per quotaion

Providing and fixing factory made UPVC White Colour Sliding Glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to UPVCprofile), appropriate dimension of UPVC extruded glazing beads, UPVC extruded interlocks and UPVC extruded Inline sash adaptor (ifrequired), EPDM gasket, wool pile, zinc alloy (White powder coated) handle on one side of extreme panel along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zinc alloy (white powdercoated) touch lock with hook (if required for wire mesh panel), stainlesssteel (SS 304 grade) body with adjustable double nylon rollers (weightbearing capacity to be 120kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitredcut and fusion welded at all corners,including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shallbe filled with weather proof silicon sealent over backer rod of requiredsize and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .Two track two panels sliding window made of (big series) frame 67 x 50 mm& sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of window above2.50 sqm upto4.00 sqm.) (BMT-P.81)

Supply and fixing of RCC cement JALI with 40 mm thickness including cost and conveyence of materials,placing in position,complete for finished item of work etc. complete.BMS W-16

Drilling of 112mm (4") Bore well with ,echanically including cost and conveyance of all drilling charges.

Supplying & Fixing of 110mm dia PVC Casing of 6kgs/cm2 pipe including cost and conveyance of all materials and labour charges etc., complete C.SSR p.no. 62

Supplying & Fixing of 32mm dia HDPE pipes 10kgs/cm2 Conforming to IS 4984-1995 including cost and conveyance of all materials and labour charges etc., complete PHE items C.SSR p.no. 57. PH item 12(b).

Supplying & Transportation of 1.00 HP 10 stages single phase ISI submersible Motor pumpset suitable for 4" bore well including cost and conveyance of all materials and labour charges etc., complete C.SSR p.no. 221, s.no.1007, ELEC-5.4.1, MAT:03640

Supplying & Fixing of Indian Pattern White Glazed 1st Quality of ISI Orissa Pan with "P" or "S" trap Hindware/Parryware/Neycer - ISI Mark 630x450 mm including cost and conveyance of all materials and labour charges etc., complete (BMW-D.05)

Prince/ Sudhakar make or equivalent quality PVC /SWR pipes & fittings ( as per ISI standards) 4kg/cm2 110mm dia. double socket (BMW-G.15)

Supply, and fixing of approved make Vent cowl above the Soil & waste pipes for ventilation as required to avoid foul smell. 110mm(BMW-G.100)

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 20mm dia.(BMW-F.81)

Supply and fixing of NP Bib Tap indian make 12.7mm BMW.E.07

Providing & placing on Terrace polyethyne water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and overflow pipes but without fittings & base support for tanks.( BMW.G.01) 2000lts

SANITARY FITTINGS:- Supply,fixing of 110 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings [Prince/Sudhakar or any ISI Brand] including cost and conveyance of all materials and labour charges etc., complete for finished item of work (BMW-G.63)

Constructing 457.2mm x 457.2mm ( 1-6" x 1-6") brick in CM (1:6) prop. Masonry inspection chamber upto 914.4mm (3-0") and fitted with light weight 457.2mm x 457.2mm ( 1-6" x 1-6") C.I. frame and cover of 20Kg. including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work. a] Depth up to 1.50 mtr (BMW-B.06).

Supplying & fixing 150 mm x 100 mm SWG gully traps of ISI make conforming to ISI 651 & 4127 with C.I Grating & Constg. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover.(BMW-A.72)

Supplying, laying, jointing and testing 152.4mm SWG SP1 pipes of ISI make confirming to ISI 651 and 4127 with air tight cement joints in CM1.5:1 propot. Including excavation of tremches and socket pits in any soil(except rock with wiring blasting) upto 1524mm depth and refilling with watering and tampering. (BMW-A.03)

S&F TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm(BMW-1.105)

Supply and Fixing of 25mm dia 2mm thick PVC pipe (ISI MARK) of Sudhakar /Mercury /Modi /Nelco /Durga /Atul make, with MS deep juction boxes concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.

Supply and Fixing of 25mm dia PVC pipe Medium (ISI MARK) with all accessories with PVC normal Junction boxes of Sudhakar/Meco Plast/Modi/Avon plast make concealed in wall with MS switch box including all required accessories including masonary work and labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable in existing pipe with 6A switch, Ceiling rose/BH/SBH of and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Residential Buildings

Supply and fixing of 6A-3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc. complete.

Run of Main: Supply & run of 2 of 36/0.3mm FR P.V.C. flexible copper wires, in existing pipe including all accessories, labour charges complete as required conforming to IS 3.1.4

Supply and fixing of 15 W Heavy duty down lighter suitable for receessed mounter mounting made of pressure diecast aluminium body with power coating acrylic diffuser with driver as per IS:15885 completre ELECT:3-8-1

Supplying and fixing of 1200 mm ceiling fan controlled by one switch and electronic regulator of 300 watts step type and concealed PVC fan hook box etc., complete as required (ELCE-5.1.1) and MAT 05508.

Supplying and fixing of SPN Distribution board with IP -20 protection suitable for sigle phase Earth Leakage Circute (ELCB)/ Residual Current Circuite Braker (RCCB)/ Double Pole (DP) Isolator as incomer and 10 KA SP MCB as out going including internal connections and labour charges for surface/ flush mounting etc., complete.

Supply and transportation of 1X 45W street lighting luminaire made of pressure diecast aluminiuem body with power coted ahving Protective toughned glass supply input voltage 120-270AC PF >0.9 C omplete,As per Elect 3-18-25