TENDER FOR UPGRADATION OF DRIVERS REST ROOMS AT BPCL TRIVANDRUM LPG PLANT

In-House Estimate for Drivers’ Rest Room Construction at TVM LPG plant.

Sl No | Title | Description | Service Code | Qty | UoM | Rate | Amount

1 | Earthwork Excavation (Up to 1.5 m depth) | Earth work in excavation upto required depth below existing ground level upto required depth including removal of vegetation,shrubs and debris, cutting and dressing the sides in slopes and bottom, levelling, grading and ramming of bottoms,bailing out of water, supplying of Temporary supports to existing services line like water pipes,sewage pipes,electric overhead and u/g cables etc all if encountered, shoring, strutting and disposal of excavated earth outside BPCL's premises to an unobjectionable place, as directed by the Engineer in Charge including necessary permissions from local authorities (if required) and charges( if any), complete. Payment shall be made as per the actual measurement but not more than excavation plan.No payment would be made for extra excavation for making slopes etc. (Payment against this item shall be released only for the earth being disposed outside BPCL premises)- Depth upto 1.5 mtr of normal soil | 9018736 | 70 | M3 |

2 | Plain Cement Concrete (PCC) – 1:3:6 | Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains,fillings, non-suspended floors, pavements & ramps or any other works etc.including the cost ofposition cement concrete of specified grade including the cost ofcentring and shuttering, tamping, ramming, vibrating,curing, in anyshape,position,thickness and finishing the top surface rough or smooth,etc. all complete as per directions of Engineer-in-charge. - All work upto plinth levelManufactured sand is permitted based on meeting the acceptance criteria - Mix Ratio: 1:3:6 (Cement: Sand: Coarse Aggregate) | 9018783 | 11 | M3 |

3 | Ready Mix Concrete (RMC) – M25 | READY MIX CONCRETE supplying and laying in position ready mixedconcrete , as per IS 4926, manufactured in fully automatic batchingplant and transported to site of work in transit mixer for a lead up to10kms having continuous agitated mixer, manufactured as per mix designof specified grade for reinforced cement concrete work includingpumping of R.M.C. from transit mixer to site of laying in all positions,excluding the cost of reinforcement but including the cost ofcentering, shuttering , admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, improved workailitywithout impairing strenght and durability, curing , finishing, as perdirection of the Engineer In-charge. RMC can be prepared with manufactured sand also. M25- Min Cement content considered is 330kg/cum | 9018803 | 39 | M3 |

4 | HYSD TMT Steel Reinforcement (Fe 500) | Supplying and placing HYSD steel reinforcement of Grade 500 (TMT) conforming to IS 1786 with protective fusion bonded epoxy coating as per IS13620, in position for RCC worksincluding straightening, cutting, bending, placing in position andbinding with 16 SWG black soft annealed binding wire at everyintersection, supplying and placing appropriate cover block all completeincluding cleaning and making it free from oil, grease etc. complete-for all heights and depths and conforming to relevant IS code (Make: SAIL,TATA, JSW, ESSAR, VIZAG STEEL or approved equivalent make conforming to IS code) | 9018814 | 4650 | KG |

5 | Brick Masonry (CM 1:5) | BRICK MASONRY Providing and laying Brick work withbricks having compressive strength not less 50kg/cm2 and conforming to BIS std. of specified class and above, satisfying efflorescene,water absorbtionand dimension test as per IS code) infoundation and plinth in Cement mortar 1:5(1 cement: 5 m sand) asper specifications in one or more brick thickness including soaking of bricks, providingopenings, recesses ,scaffolding,staging, curing, finishing the jointsflush below ground level and raking out joints etc. all complete, as perdirections of Engineer-in-charge.M.sand is permitted based on meeting the acceptance criteria | 9018821 | 37 | M3 |

6 | Cement Plaster (12 mm, 1:5) | CEMENT PLASTER Providing cement plaster finished including cleaning,hacking of base surfaces, scaffolding,curing,finishing etc. all complete for all heights as per specificationsand directions of Engineer-in-charge including grooves, bands, drip moulderwhere ever required as specified.Also including providing 20 gauge chicken wire mesh stretched tight at all RCC/ PCC and masonry meeting points in 300mm wide strips (150mm on on each surface) fixed with G.I. "U" type nails before plastering.M.sand is permitted based on meeting the acceptance criteria. 12 mm thick with 1:5 mix | 9018853 | 315 | M2 |

7 | Granite Flooring | Providing and laying Granite flooring including flooring on kitchen counter slabs and wash basin counter slabs with 18mm - 20mm thickmarble stone (sample of marble shall be approved by Entineer-in-charge)over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarsesand) laid and jointed with grey/white cement slurry mixed with matching pigment, epoxy touch ups including rubbing, curing, and polishing to edgespolishing to granolithic finish complete with Granite of any size, shape and shade | 9018981 | 13.8 | M2 |

8 | Vitrified Tiles – Wall | Supplying and laying vitrified ceramic tiles with water absorption less than 0.08% and conforming to IS : 15622, of approved make, colour and design at all levels and locations using approved first quality tiles in walls with or without spacers, laid over abedding of cement mortar bed of mix 1:4 to achieve overall wall thickness as 50mm and a backcoat of white cement slurry and joints filled with white cement mixed with matching pigment complete with all bye works like covering

with plaster of paris, curing etc. at all leads and lifts and as perspecification / instructions of the Engineer Incharge. | 9018964 | 60 | M2 |

9 | Vitrified Tiles – Flooring | Supplying and laying vitrified ceramic tiles with water absorption less than 0.08% and conforming to IS : 15622, of approved make, colour and design at all levels and locations using approved first quality tiles in flooring with or without spacers, laid over abedding of cement mortar bed of mix 1:4 to achieve overall flooring thickness as 50mm and a backcoat of white cement slurry and joints filled with white cement mixed with matching pigment complete with all bye works like covering

with plaster of paris, curing etc. at all leads and lifts and as perspecification / instructions of the Engineer Incharge. | 9018965 | 75 | M2 |

10 | Vitrified Tiles – Toilet Walls | Supplying and laying vitrified ceramic tiles with water absorption less than 0.08% and conforming to IS : 15622, of approved make, colour and design at all levels and locations using approved first quality tiles in toilet walls with or without spacers, laid over abedding of cement mortar bed of mix 1:4 to achieve overall wall thickness as 50mm and a backcoat of white cement slurry and joints filled with white cement mixed with matching pigment complete with all bye works like covering

with plaster of paris, curing etc. at all leads and lifts and as perspecification / instructions of the Engineer Incharge. | 9018970 | 40 | M2 |

11 | Aluminium Windows | Supplying & fixing in position of aluminium windows,ventilators,with extruded & integral colour powder coating( 50microns) , Aluminium sections,

powder coated Aluminium beadings,powder coated Aluminium profile panelsheets, toughened glass of 6 mm manufactured to IS 733, IS 1285 and other relevant codes & using

minimum 2mm thick (or as specified) heavy sections from approvedmanufacturer including cost of supplying required no. of heavy

duty stainless steel butt hinges, pivots, approved door and windowshandles, EPDM Gasket, PVC/Neoprene Gasket Lining,

Stainless steel screws, mastic filling, weather strips, tower bolts,nuts, washers, rollers etc. as required and as per drawing etc. all

complete at all heights and as directed by the Engineer-in-Charge. Therate shall also include closing thegaps around the frame and the adjoining surface with

approved silicone sealant on both faces to achieve watertightness.

Note:1. No extra payment will be made for all non-aluminium consumable itemslike screws, gasket, weather strips, PVC/Neoprene lining and butthinges, tower bolts etc.

2. Glazing, Particle Boards, aluminium grills, mesh etc. will bemeasured and paid separately under relevant item.

3. All fitting shall be of matching colour powder coated aluminiumsections.

4. The aluminium sections shall be smooth, rust free, straight, mitredand jointed mechanically wherever required including cleat angles at no extra cost. | 9018996 | 20 | KG |

12 | Flush Door (35 mm) | Providing and fixing ISI marked flush 35 mm door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: | 9019055 | 4.62 | M2 |

13 | PVC Door Shutter (37 mm) | Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm ( ± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37mm, wall thickness 2 mm (± 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer’s specification and direction of Engineer-incharge. | 9019050 | 6.3 | M2 |

14 | uPVC Door Frame | Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm ( ± 0.2 mm) , corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer’s specification and direction of Engineer-in-charge. | 9019049 | 24 | M |

15 | Wash Basin | Supplying, fitting and fixing white glazed vitreous china wash basin ofsuperior quality with ISI mark and size 550mm x 430mm, having single ordouble holes with 15 mm CP brass pillar tap, CP brass chain and plugs, 32mm CP brass waste coupling, 32mm CP Brass Bottle trap and unions, 32mm dia PVC flexible waste pipe,15mm PVC inlet water pipe connection, CI cantilever bracketsembedded in 1:2:4 concrete, 15 mm CP brass angle stopcock, etc. fillingthe gaps between basin and wall with white cement etc., pedestal, allcomplete at all leads and lifts as per drawings, specifications andinstructions of the Engineer Incharge. | 9019289 | 2 | EA |

16 | Half Stall Urinal | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: Single half stall urinal with 5 litre PVC. flushing cistern | 9019286 | 2 | EA |

17 | Indian WC (Orissa Pattern) | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | 9019282 | 1 | EA |

18 | European WC (EWC) | Supplying and fixing white glazed vitreous china European water closetwith ISI mark conforming to IS 7231 - Studio type with cistern (EWC) of superior quality 81cmhigh, double trap syphonic pattern, 'P' or 'S' trap, with low level 10 litre low level white P.V.C. cistern with cover with siphon and standard flush fittings, with specified color solid plastic seat cover & lid of superior approved quality, CP brassbar hinges, screws, bolts, rubber, buffers 15mm dia PVC inlet pipeconnection and CP brass angle stopcock fixing EWC to floor withnecessary brass screws, all complete at all leads and lifts as perdrawings, specifications and instructions of the Engineer Incharge. | 9019284 | 1 | EA |

19 | CP Brass Shower | Providing and fixing C.P. brass shower with 15 or 20 mm inlet connections and 63/100mm dia swivel type shower with arm etc. complete as required. | 9020396 | 2 | EA |

20 | CP Towel Rail | supplying and fixing CP brass towel rail 600mm long, 20 mm dia with CPbrackets fixed to wall with CP brass screws and wooden rawl plug, at all leads and lifts as per instructions of theEngineer Incharge. | 9019353 | 2 | EA |

21 | CP Brass Bib Cock | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. | 9019319 | 7 | EA |

22 | CP Brass Angle Valve | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931- 15 mm | 9019323 | 12 | EA |

23 | CI Floor Trap (100 mm) | supplying and fixing Heavy Grade Cast Iron floor/Nahani trap of specified size with CP hinged heavy SS grating to be fixed in PCC M15 with 20mm down size aggregateand made water tight with all bye works complete as per the direction ofthe engineer - 100mm | 9019382 | 12 | EA |

24 | UPVC Pipe (100 mm) | supplying,fixing and / or laying, jointing and testing heavy duty 6kg/cm2 UPVC pipe ISI marked pipelines including ventilating pipe with all necessaryfittings and accessories like specials, bends, single and / or double,equal/unequal branches of required degrees with or without oval accessdoor, offsets of required projection, hill rest bend,inverted branch of required degree, traps, plugs, cowl, clamps etc., all conforming to IS code , of approved make, with all leads and lifts, all complete as perspecification and direction of Engineer Incharge- 100mm | 9019357 | 30 | M |

25 | HDPE Pipe (25 mm) | Supplying, fitting and laying concealed HDPE pipes of heavy class conforming to IS code 4984 with all necessary fittings such as bends, tees,elbows, reducers, unions, nipples, plugs, clamps, fixtures,etc., inmasonry / concrete works/ under floors in soils etc. including laying ina layer of sand if laid under floors,necessary painting with two coatsof anticorrosive black bitumastic paint over a coat of approved primer ,etc., complete (including chasing and concealing in walls/floors) at all leadsand lifts as per drawings, specifications and instructions of theEngineer Incharge.-25mm | 9019308 | 50 | M |

26 | BLDC Ceiling Fan (48") | Supply & Fixing of 3 star rating Sweep 3, Blade ceiling fan of approved make with Modular electronic regulator as per the directions of Engineer-in-Charge. - 48" BLDC

27 | Industrial Exhaust Fan (300 mm) | Supply and Installation of following types / sizes of single phase; 240 V AC, 50 hz fans of approved makes as per directions of Engineer-in-Charge; 230 V, single phase, 1500rpm, heavy duty, axial flow industrial exhaust fans with FRP louveres - 300 mm | 9019205 | 3 | NO |

28 | 5A Modular Switch | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. - 5 Amps Swicth | 9019166 | 25 | NO |

29 | 5A Plug Socket | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. - 5 Amps Plug Socket | 9019167 | 15 | NO |

30 | 6 Module GI Box | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for

modular switches in recess etc as required - 6 MOD -200 x 75 mm | 9019125 | 8 | NO |

31 | PVC Conduit Pipes (2mm) | Supply and laying of 2mm thick PVC approved make pipes inside roof concreteduring pouring of concrete and wall including placing of all accessories like fan hooks, junction boxes, bends etc and wall casing using machine chiselling, fixing pipe and making good the cuts complete | 9019146 | 100 | M |

32 | Point Wiring | POINT WIRING :Supply & Laying primary Point Wiring from Switch Board to the lighting Fixture/Celing Fans Exhaust Fans/Call Bell lamps/ by means of 3 runs of 1.5 sq.mm. PVC FRLS 650 Volts/1100 Volts grade ISI approved & ISI marked. PVC Insulated Stranded copper Conductor through Surface GI 25mm Conduits (Job includes supply and installation of conduits with accessories) in an approved manner. This Shall Include the supply & Installation of Single Pole 5-Amps Modular Switch of approved Made in modular recessed box complete with all labour and materials for the following distances. | 9019102 | 150 | NO |

33 | 15A Power Wiring | Supply and laying two runs of 4 sqmm and one run of 2.5 sqmm FRLS PVC copper wire 650 Volts/ 1100 Volts grade from MCB DB to individual switch boards for sourcing 15A independent switch sockets for raw and ups power in already laid conduits complete including hook up at both ends | 9019157 | 75 | M |

34 | LED Tube Lights | Supply & Installation of LED TUBE LIGHTS complete with fittings with specified Wattage. Itshould be made out of high quality materials and complying with industrial standardpractices to ensure high reliability and long life. The entire LED TUBE LIGHTS shall becapable of withstanding stresses and vibrations likely to be encountered in outdoorconditions by having necessary design/strength and protections inbuilt in itselectronics within the specified electrical parameters of the product. TUBE LIGHTS shouldbe provided with High quality long lasting PMMA poly acrylic front cover that should bedistortion free, heat Resistant, Toughened, UV stabilized.The LED light fixtures should be conforming to the standard specifications and indicative models. | 9019265 | 10 | NO |

35 | Exterior Painting | Preparing surface and painting of approved make, shade and quality in all heights of walls,ceiling, sun sheds fins etc. incl. providing scaffolding,pitting in plaster to be made good, cleaning with coir brush & sand paper, curing and supply of all materials and labour complete. The finished surface shall be even and uniform.The application of paint shall conform to Manufacturer's recommendation and as per the directions of Enginner-in-Charge- 2 coats of primer+ 2 coats of exterior paint | 9018933 | 320 | M2 |

36 | Prefabricated Septic Tank (15 KL) | Construction, supplying, installation, testing and commissioning of prefabricated septic tank of 15KL as per standards and IS:2470 Part-I , with all necessary accessories like inlet, outlet vent pipes, manhole covers, rungs etc. including earthwork in excavation in all type of soil except soft and hard rock, backfilling and disposal of surplus earth for all leads etc. complete as per standards, drawings, specifications and directions of Engineer-in-Charge. The job includes excavation;sand filling; cement concrete foundation, below finished formation ground level and also incl, inlet/ outlet chambers;3M long 65mm dia AC vent pipe with AC cover/fixed to the roof slope of the septic tank | 9019391 | 1 | EA |

37 | Soak Pit | Making soak pit 2.5 m diameter 3.0 metre deep with precast rings and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design conforming to IS:2470. ( Rate is inclusive of top slab of required thickness & C.I. FRAME with cover) | 9019383 | 2 | EA |