CONSTRUCTION OF DEVELOPMENT WORKS @ NANAMA DUNGAR TALETI AT VILLAGE MANGAVANA TA.NAKHATRANA

NAME OF WORK:- CONSTRUCTION OF DEVELOPMENT WORKS @ NANAMA DUNGAR TALETI AT

VILLAGE MANGAVANA TA.NAKHATRANA

BILLOF QUANTITIES

(A) Percentage Rate Tender (Upto INR 50 Cr)

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

1 Excavation for foundation upto 1.5m depth including sorting out and 143.00 Cmt. 157.33

stacking of useful materials and disposing of the excavated stuff upto

50m lead. (B) Dense or hard soil.

2 Providing and Laying cement concrete 1:4:8 (1-Cement 4-Coarse 14.20 Cmt. 2968.27

sand -8-machine crushed stone aggregate 40mmnominal size) and

curring complete excluding cost ofform work in (a) Foundation and

3 Providing and filling in foundation with ordinary cement 85.70 Cmt. 3327.08

concret M100 mix and providing necessary vetical pin headers

including formwork vibrating ramming and curing complete.

4 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse 31.60 Cmt. 3740.22

sand : 4- graded stone aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A) Foundation and Plinth

5 Providing and laying cement concrete 1:1.5:3 (1 Cement : 1.5 coarse 15.10 Cmt. 4600.45

sand :3 graded stone aggregates 20m.m. nominal size) and curring

complete excluding cost of form work and reinforcement for

reinforced concrete work in : (a) Foundation footing base of columns

and mass concrete etc comp.

6 UnCoursed rubble masonary with hard stone of approved quality in 50.50 Cmt. 2628.91

foundation and plinth in cement mortar 1:6 (1-Cement 6-Course

sand)including levelling up etc. complete

7 Providing and Laying ordinary cement concrete 1:1.5:3 (1-Cement 7.50 Cmt. 9062.91

1.5-Coarse sand 3-Graded stone agg. 20mm nominal size) and

finishing but excl. the cost of reinfor RCC work in Column having C/S

area 0.12 to 0.18 sq. mt.

8 Providing and Laying ordinary cement concrete 1:1.5:3 (1-Cement 5.20 Cmt. 12156.87

1.5-Coarse sand 3-Graded stone agg. 20mm nominal size) and

finishing but excl. the cost of reinfor RCC work in Column having C/S

area 0.05 to 0.08 sq. mt.

9 Providing and Laying ordinary cement concrete 1:1.5:3 (1-Cement 25.10 Cmt. 6948.11

1.5-Coarse sand 3-Graded stone agg. 20mm nominal size) and

finishing but excl. the cost of reinfor RCC work in Beam having C/S

area 0.12 to 0.18 sq. mt.

10 Providing and Laying ordinary cement concrete 1:1.5:3 (1-Cement 3.70 Cmt. 8963.84

1.5-Coarse sand 3-Graded stone agg. 20mm nominal size) and

finishing but excl. the cost of reinfor RCC work in Beam having C/S

area 0.05 to 0.08 sq. mt.

11 Providing and laying ordinary cement conctere M20 (1cement 10.10 Cmt. 4600.45

:1.5coarse sand:3 stone agg.20mm nominal size) and curing

comp.incl.cost of form work but excl.the cost of reinforcement

for reinforced concrete work in copping

12 Filling in plinth with sand under floors including watering, ramming, 57.20 Cmt. 481.80

consolidating and dressing etc. Complete.

13 Coursed rubble masonry with stone of approved quality in 4.80 Cmt. 3627.34

foundation and plinth in Cement Mortar 1:4 (1- Cement : 4-coarse

sand) etc. complete.G.F.

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

14 Coursed rubble masonry with stone of approved quality in super 70.00 Cmt. 3909.06

structure above plinth in Cement Mortar 1:4 (1- Cement : 4-coarse

sand) etc. complete.G.F.

15 Providing and laying ordinary cement conctere M20 (1 cement :1.5 1.10 Cmt. 4640.21

coarse sand:3 stone agg.20mm nominal size) and curing

comp.incl.cost of form work in sill and sides (R.C.C.Band) but.excl.the

cost of reinforcement. (R.C.C.Band)G.F.

16 Providing and laying ordinary cement conctere M20 (1 cement :1.5 1.60 Cmt. 10589.02

coarse sand:3 stone agg.20mm nominal size) and curing

comp.incl.cost of form work in sill and sides for R.C.C Lintel incl.

Finishing smooth with curing comp.incl.cost of form work

but.excl.the cost of reinforcement. (R.C.C.Band) G.F.

17 Providing & Laying cement concrete 1:1.5:3 (1-Cement 1.5-Coarse 0.90 Cmt. 6998.26

and 3-Graded nominal size) for reinforced conc. Chhajas not

excluding 10 cm thickness upto floor two level incl. Finishing the

exposed surface with cement mortar 1:3 (1-Cement 3-Fine sand to

give a smooth surface centering and form work and curing comp.

excl. the cost of reinforcement.

18 Providing and laying ordinary cement conctere M20 (1 cement :1.5 17.90 Cmt. 7824.08

coarse sand:3 stone agg.20mm nominal size) and finishing smooth

with curing etc. complete including the cost of form work

butexcluding the cost of reinforcement for R.C.C. work in Slabs

having more than 10 cm & :upto 13 cm thickness.G.F.

19 Providing and laying ordinary cement conctere M20 (1 cement :1.5 3.90 Cmt. 5108.80

coarse sand:3 stone agg.20mm nominal size) and finishing smooth

with curing etc. complete including the cost of form work

butexcluding the cost of reinforcement for R.C.C. work in Slabs

having more than 10 cm & :upto 13 cm thickness.G.F.

20 Providing TMT Bar FE 500D reinforcement for R.C.C.work including 11860.00 Kg. 77.29

bending, binding and placing in position complete upto floor two

21 Providing and fixing 35 mm thick double shutters for Doors, 7.56 Smt. 5338.30

windows and clerestory windows including Indian teak wood frames

10 cm x 7 cm. size including black enamelled iron oxidised fixtures

and fastenings including primer coat of approved quality and two

coats of oil painting etc, complete. (ii) Fully Panelled.

22 Providing and fixing window having extruded aluminum Colour 14.40 Smt. 1583.95

anodized section frame main outer size 95mm x 24mm x 1.17mm (of

Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track

member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40 mmx18mm

x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949

@ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame as per details etc

23 Providing and fixing M.S.grills of required pattern to wooden frame 502.00 Kg. 109.08

of windows etc.with M.S.flat at required spacing on frame around

square or round bars with round headed bolts and nuts by screws (A)

Plain grills including two coats of oil painting

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

24 Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP 4.73 Smt 2377.76

depress panel shutter having extra reinforcement on sides & edges

in Gel coat finish. The core of the shutter & frame is to be filed up

with injected fire retardant grade polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & shutter is to be water

proof weather proof, termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve.

25 Providing upto floor two level precast cement concrete jali or grill 3.60 Smt 768.18

1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate

6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire

including roughening,cleaning, fixing and finishing in cement mortar

1:3 and curing complete. (A) 50mm thick

26 Providing 15 mm. Thick cement plaster in single coat on similar side 715.00 Smt 180.40

Brick/concrete half walls for interior plastering upto floor two level

and finished even and smooth in CM 1:3 (1 cement : 3 sand)(

27 Providing 10 mm. Thick cement plaster in single coat on ceiling and 224.00 Smt 161.53

sofits of stairs interior plastering upto floor two level and finished

even and smooth in CM 1:3 ( 1 cement : 3 sand )

28 20mm. thick sand faced cement plaster on walls upto height 234.00 Smt 315.69

10meters above ground level consisting of 12mm. thick backing coat

of c.m. 1:3 (1cement : 3 sand) and 8mm. thick finishing coat of c.m.

1:1 (1cement : 1 sand) etc. complete.

29 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in 138.00 Smt 1120.36

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3- coarse sand ) finishing with flush

pointing in white cement.

30 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in 8.00 Smt 1195.02

skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

31 Providing and laying ceramic tiles 30cmx30 cm size coloured glazed 15.70 Smt 1017.30

tiles 6mm thick in flooring treads of steps and landing laid on a bed

of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement

32 Providing and laying ceramic tiles 30cmx45 cm size coloured glazed 60.10 Smt 1090.32

tiles 6mm thick in skitrting,risers of steps and dado on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement

33 Providing and laying broken chine mosaic flooring for terrace 133.00 Smt 779.70

using 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

34 Providing and laying 20mm thick granite mirror polished 2.70 Smt 2567.79

(telephone black coloured) with exposed edge quarter round

for platform,door/window cill and jams,treads and risers for

steps fixed to wall with neat cement as directed by Engineer-in-

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

35 Finishing wall with weather proof exterior emulsion paint on wall 234.00 Smt 120.26

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

36 Finishing wall with water proffing cement paint of on wall surface 431.50 Smt 60.80

(two coats) to give an approved brand and manufature and of

required shape even shade after thoroughly brushing the surface to

remove all dirt and remains of loose powdered materials.

37 Wall painting (three coats) with plastic emulsion paint of Asian, 398.00 Smt 167.51

Nerolac or equivalent approved brand and manufacture on

undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.including applying two coats of

Birla or Asian acrylic lapy ( putty) & two coats of primer of approved

brand and manufacture on wall surface to give an even shade

38 Distempering (two coats) with oil bound distemper of approved 49.40 Smt 76.68

brand & manufacture & of required shade on wall surfaces to give an

even shade,over & including a priming coat with a distemper primer

of approved brand & manufacture after thoroughly brushing the

surface free from mortar dropping & other foreign matter & also

including preparing the surface even & sand papered smooth.

39 Painting two coats and one coat of priming coat on new steel and 23.40 Smt 104.99

other metal surface with synthetic enamel paint, brushing to give an

even shade including cleaning the surface of all dirt, dust and other

foreign matter.

40 Providing and fixing wash down water closet (European type, 3.00 No. 1980.54

W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand)

(Seal and cover to be measured and paid for separately)(A)

vitreous China Pattern :(i) in white colour incl providing and

fixing 100mm size P or S trap for water closet squatting pan

including jointing the trap with the pan and soil pipe in cement

Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China.and

providing and fixing plastic seat and cover for wash down

water closer with C.P. brass hinges and rubber buffers. (B)

Black plastic seal and cover.

41 Providing and fixing Urinal or approved quality including conecting 3.00 No. 1074.86

the Urinal with waste pipe , tap etc. complete.(A) White

earthenware flat back or corner type size 430mm x 260mm x 350mm.

42 Providing erecting and fixing double coated ISI water tank of 1000.00 Lit 3.95

required capacity each with all necessary fittings and connection etc.

complete on terrace

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

43 Constructing brick masonry chamber for underground C.I. Inspection 3.00 No. 2932.93

chamber and bends with bricks having crushing strength not less

than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm

x 610mm intenal dimensions total weight of cover with frame to be

not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and 450mm deep

for single pipe line

44 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 5.00 No. 586.27

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

45 Providing, laying and jointing in true line and level 110 18.00 Rmt. 786.90

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

46 Providing and fixing cast iron spigot and socket soil,waste and 6.00 Rmt. 741.01

venulating pipes of the following nominal size. (B) 75mm. dia.

47 Providing and fixing in position cowel vent to pipes (I) 75mm. dia. 2.00 No. 393.04

48 Providing and fixing screw down bib taps of following size : (B) Brass 6.00 No. 186.83

chromium plated screw down bib tap (I) 15mm. dia.

49 Providing and fixing gun metal check or non - return fullway wheel 2.00 No. 314.73

50 Providing and fixing gun metal check or non - return fullway wheel 3.00 No. 203.82

51 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 36.00 Rmt. 72.65

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

52 Providing laying and jointing in true line and level 32mm dia. U.P.V.C. 24.00 Rmt. 119.15

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

53 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working 6.00 Rmt. 339.05

pressure poluthene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(G)110 mm

54 Providing and fixing chromium plated brass half trun flush cock of 3.00 No. 275.76

approved quality including fixing in pipe line etc. complete.(iii) 32mm

55 Providing and fixing G.I. inlet connection for flush pipe with 3.00 No. 40.94

56 Providing and fixing G.I. flush jet pipe with hanging clamp for 3.00 No. 404.00

57 Providing sock pit of 5.0 Cu.mt. volume incl -udingexcavating and 1.00 No. 3205.04

filling brick bats with dry masonarywork at top for 45cm. height

including covering the topwith stone including providing vatas in cm.

1:3 withfinishing curing etc.complete as directed.

58 Providing and fixing wash basin with single hole for pillar tap 2.00 No. 2037.15

with C.I or M.S. brackets painted white incl.cutting holes and

making good the same incl.32mm dia.C.P. brass waste,32mm

dia.M.I.fisher and 15mmdia.capstan head pillar tap union.

Vitreous china flat back wash basin 550mm * 400mm size

white in colour.

59 Box cutting the road surface to proper slope and camber for making 172.00 Cmt. 109.24

a base for road work including removing the excavated stuff and

depositing on the road side slope as directed upto 50Mt.lead.

60 Providing and fixing pre-cast Rubber Dye / steel Dye inter 856.30 Smt. 706.93

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 : 2006 including

mm Sand layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-2018 etc.

61 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 16.00 Pt. 449.45

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Light Pt. cat lll

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

62 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 9.00 Pt. 629.23

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multistrand copper wires, in below type of pipe

erected with 6A Modular type switch and hum free EME four

or more step type electronic fan regulator with separately

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete cat lll

63 Providing and erecting Approved make Ceiling fan with double 9.00 Nos. 1596.81

ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200

mm. sweep complete, canopy erected on existing hook or

clamp with earthing. [Make shall be approved by Engineer in

64 Supplying & erecting fan hook box of 10 mm M.S. round bar 12.00 Ea 108.07

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

65 Supplying and erecting 19 / 20 mm. nominal bore Medium 6.00 Mtr 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and earthing.

66 Providing 2.5mm.thick laminated acrylic sheet to cover the fan 9.00 Pt. 18.18

hook or Fan box.

67 Point wiring for on board Looped Plug with 6A Modular type 2.00 Pt. 241.39

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall /

ceiling with following type accessories Cat III

68 Providing following type of Modular Type accessories mounted 2.00 Pt. 49.49

with PVC/Metalic/Wooden box, single mounting base frame

covered with textureed /metalic/white front plate,modules

erected with necessary connections as per site situation

directed by Engineer in charge.(9) 16 Amp. One Way switch Cat-

69 (10) 6/16Amp. Universal socket cat lll 2.00 Ea 78.78

70 Providing and erecting ISI mark Medium class RIGID PVC PIPES 200.00 Mtr. 23.23

of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in

approved manner as directed (a) 20 mm

71 Providing and erecting Mains with 1.1 KV grade FRLS PVC 150.00 Mtr. 78.78

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

following size (a) with medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

72 Mains with 1.1 KV grade FRLS PVC insulated ISI marked 50.00 Mtr. 140.39

stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (a) with medium class Rigid PVC

pipe and accessories (b) 2 wire 6 sq. mm

73 Supplying and erecting LED indoor fittings with LEDs of wattage 18.00 Nos. 373.70

0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA alluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with

company mark/ name 160 V to 270 V,Power Factor more than

CCT 3000 K to 6500K,

Luminaireefficacy> 85 lumens/watt

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Tube Light with

integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, 4 feet

74 Providing & erecting Sheet Steel powder coated MCB 6.00 Ea 867.59

distribution board -flush/Surface mounted fitted with

busher,neutral link,earth bar and DIN rail confirms to IS

& 3,IEC 61439-1&3 without MCB to house appropriate nos of

MCBs ( The DBs should be used of same company of MCB tobe

used) suitable for (A) single phase incoming and horizontal

single phase outgoing (a) Single door (IP-30) (iv) 12 way

75 Providing & erecting Miniature circuit breaker single pole 6A to 6.00 Ea 112.11

25A suitable to opearte on 2240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box

confriming to IS 8828/1996 with ISI Mark Cat-III

76 Providing & erecting 240 V MCB double pole switch for motor 12.00 Nos. 330.27

& inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

(B) 40 Amp. Cat-lll

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

77 Supplying & erecting earth pit of minimum bore dia.150mm 1.00 Ea 4591.46

size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate) &

having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary

test report must be submitted.(a) For Electrical Installation up

to 440V in normal soil Length of pipe-1 Mtr Back filling

compound-1 Nos Bag of 15 Kg.

78 Providing and erecting HOT deep Galvanised iron srtip wire 8 to 2.00 Kg 77.77

79 Providing and erecting Approved make Four pole moulded case 1.00 Ea 6173.12

circuit breaker habing breaking capacity ICU of 25 K.A. at 415 V

having normal current rating upto 25 A to 100 A with fixed

thermal & magnetic release suitable to work on A.C. supply

C/S with all internal connections,spreader tinned copper &

complete ICS=100% of ICU only Cat-III

80 Providing & erecting weather proof, dust & vermin proof, floor 1.50 sq m 10468.65

mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting

with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied

switch gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing

strip complete. The Panel shall be painted with epoxy powder

coating. (The rates excludes the cost of switchgears, bus bars,

inter connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base

beams) The panel shall be supplied with following approved

manufacturers with following size.(A) locally fabricated panel

board (i) with 350 mm depth

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

81 Supplying and erecting triple pole & neutral 440V / 500V panel 0.80 Mtr 1961.42

mounting Copper Busbars with four equal Nos. of electrolyte

bus having current density not more than 1.6 Amp. / sq.mm

(Rated current / cross section area) duly wrapped with colour

insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports

/insulators, main cable socket to each bar, erected in existing

cubical panel with necessary connections.(A) Suitable for

82 Supplying and erecting approved make suitable panel indicator 3.00 Nos. 45.45

lamps of LED type lamp, lens cover, Bakelite holder complete

erected with necessary connections.

83 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 45.00 Mtr. 281.79

multistrand Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of

following size of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2

84 Providing & erecting 415 V MCB Four Pole for Motor & 2.00 Ea 668.62

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

(b)40 Amp. Cat lll

85 Mains with ISI marked, 1.5KV grade electrolyte multi stranded, 20.00 Mtr 87.87

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. (f) One wire

86 (h) One wire 25.00 sq. mm 8.00 Mtr 225.23

87 Approved make ELCBs / RCCBs conforming to IS: 12640 and 5.00 Ea 2235.13

having sensitivity of 30 mA and Short Circuit withstand capacity

of 6 KA and suitable for operation on single phase 240 V.

having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for

following Max. rating erected as directed (ii) 40Amps. DP cat

88 Providing and fixing heavy duty flange type brass double 2.00 Ea 75.75

compression type cable gland with rubber ring for PVC

insulated armoured cable complete without going insulating

tape etc for (B) 3 & 1/2 core 35/50 Sq.mm

It.No. Description of Item ( with brief specification and reference to book Quantity Unit Rate in Amount

of specifications) Figures

89 Sloder less criming type Aluminium lugs confirming to IS 4.00 Ea 20.20

sutable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.(D)

I/We am/are willing to carry out the work at............... % above/ below Percent (Should be written in figures and

words ) of the estimated rate mentioned above.Amount of my /our tender works out as under .

Estimated amount put to tender Rs.41,48,692.43 Estimated amount put to tender Rs.41,48,692.43

Deduct …………………..% below Add …………………..% Above

1 The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer – In –

Charge for which no extra payment shall bemade.

2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement

Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input

rate mentioned in all the tender.

Executive Engineer

R & B Panchayat Division

Signature of the Contractor. Bhuj - Kachchh