Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹59.4 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹69.7 L+₹10.3 L (17.4%)Admitted-Finance | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | GIASUDDIN SK L1 | JANTA ENGINEERING WORKS L2 |
|---|---|---|---|---|---|
| 1.00 | Servicing of 25 ton Gantry Cranes on main barrage hoist bridge | 4 | Nos. | 13,000 ₹52,000 Lowest | 15,167 ₹60,668 |
| 2.00 | Repair of gantry crane on break down condition of Kirolskar air cooling diesel engine. | 2 | Job | 1,16,800 ₹2,33,600 Lowest | 1,25,350 ₹2,50,700 |
| 3.00 | Greasing all embedded guides of gate and counter weight. | 216 | Bay | 1,700 ₹3,67,200 Lowest | 1,911 ₹4,12,776 |
| 4.00 | Cost for arrangement of holding the dam/Barrage gate and its counter weight by special fixtures, tools and tackles, chain pulley blocks and heavy scaffolding etc. as per requirement for performing repairing works at the site. The cost includes cost of man powers, hire charges of T & P, chain pulley blocks, scaffolding and overhead cost etc. to complete the job as per the direction of Engineer in charge (EIC). Gate shutter size above 70 m. | 10 | Each | 18,000 ₹1,80,000 Lowest | 18,400 ₹1,84,000 |
| 5.00 | Cost for repairing of vertical lift gates shutter of canal/river including dismantling the damaged portion at lower parts(Skin plate, horizontal and vertical girder/ stiffener etc. as per IS 2062-2011/latest revision) not more than 25% of gate height from bottom by gas cutting and fitting fixing and fabricated by welding as per direction including cost of machineries, manpower, cutting aligning anchoring welding, finishing consumables, carries and all overhead with all lead and lifts complete as per specification. (II) width of gate shutter size above 2 m(without painting). | 5,500 | Kg. | 135 ₹7,42,500 Lowest | 167 ₹9,18,500 |
| 6.00 | Scaffolding charges for strengthening work, repairing of cracks, painting of erected gates in the bay of main Barrage. | 20 | Bay | 8,800 ₹1,76,000 Lowest | 9,200 ₹1,84,000 |
| 7.00 | Surface cleaning of metal surfaces by chemical cleaners and then by hand with emery paper, wire brush and power tool cleaners and removing dust and preparation of surface including cost of all material, labours, machinery, scaffolding, etc., complete with initial lead for sand up to 1 km and all lifts. | 200 | Sqm. | 55 ₹11,000 Lowest | 58 ₹11,600 |
| 8.00 | Painting of embedded parts, all types of gates, stop-logs and bar screen/gratings etc. on prepared surfaces with one coat of inorganic zinc silicate primer (airless spray preferred) 70+-5 micron and two super coats with a total thickness of 300 microns (each 150+-5) of solvent less coaltar epoxy paint each coat 150 microns (total 300 microns) including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. | 200 | Sqm. | 345 ₹69,000 Lowest | 374 ₹74,800 |
| 9.00 | Lubricating of all Steel Wire ropes of gates. | 108 | Nos. | 1,500 ₹1,62,000 Lowest | 2,065 ₹2,23,020 |
| 10.00 | Strengthening work of top, middle and bottom girder of gate no 56. | 1 | Nos. | 1,90,000 ₹1,90,000 Lowest | 2,10,554 ₹2,10,554 |
Tender Value
₹75.9 L
EMD Value
₹1.5 L
Closing Date
16 Jul 2025, 4:00 pmClosed
Executive Engineer
Head Works Division-I, Farakka Barrage Project, P.O. Farakka Barrage, Dist. Murshidabad, West Bengal, PIN 742212
As per bid document
2025_FBPF_859845_4
GM/FBP-14 of 2025-26
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
365 days
Farakka, Dist. Murshidabad
As per bid document
2 documents required · 2 mandatory
₹0
₹1.5 L
Yes
5 Feb 2026
11 Jul 2025
17 Jul 2025
11 Jul 2025
16 Jul 2025
11 Jul 2025
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .