Vijayawada Division - Replacement of over aged or damaged various types of LED light fittings over the division and facade lighting arrangements to DRM office buildings.

batten type including power LEDs complete with all accessories and confirming to latest Specifications. Please see Item Breakup for details. 2642860.00 AT Par 2642860.00

including power LEDs complete with all accessories and confirming to latest Specifications. Please see Item Breakup for details. 495246.96 AT Par 495246.96

(Surface/Suspended) mounting with System efficiency 150LM/W, complete with necessary mounting accessories, clamps and hardware etc. as per latest specifications.

including power LEDs complete with all accessories.

light fitting including power LEDs complete with all accessories.

light fitting including power LEDs complete with all accessories.

light fitting including power LEDs complete with all accessories.

8 VIJAYAWADA DIVISION-ELECTRICAL/SOUTH CENTRAL RLY

light fitting including power LEDs complete with all accessories.

fitting including power LED's complete with all accessories.

fitting including power LED's complete with all accessories.

fitting including power LED's complete with all accessories.

fitting including power LED's complete with all accessories. Please see Item Breakup for details. 1369053.00 AT Par 1369053.00

fitting including power LED's complete with all accessories and confirming to standard latest Specification.

14 Description:- Supply, fixing, testing and connecting of 9W LED Bulbs.

including power LEDs complete with all accessories and confirming to standard latest specification.

(4W+8W+4W) or (10W+4W+2W) with pressure aluminium die cast with IP 67 protection suitable to work on 24V DC, as desired by Railway site Engineer.

all connecting accessories. Please see Item Breakup for details. 349000.00 AT Par 349000.00 Description:- a) Supply and wiring of concealed / Surface point wiring (without PVC conduit/PVC

one no.of PVC insulated multistrand copper conductor for earth continuity as per specification enclosed. The price shall also includes 6A, module switch. b) Supply and fixing of PVC conduit pipe/PVC casing & caping with Elbows & Jn.boxes etc. for point wiring as per specification enclosed. Please see Item Breakup for details. 413230.00 AT Par 413230.00 Description:- Supply and wiring of concealed / surface, Inside mains by 02 Nos., PVC insulated

specified size PVC insulated multi strand copper conductor through PVC conduit / casing and caping as per specification enclosed. Please see Item Breakup for details. 173500.00 AT Par 173500.00 20 Description:- Provision of Earthing arrangements S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () B-Supply, Erection, Testing & Commissioning of Facade lighting Above/ arrangement including wiring to DRM office.( Note: NOTE: The cost of Schedule-B is 13668777.00 Below/P inclusive of GST & the tenderer has to quote the percentage AT PAR/ ABOVE/ BELOW ar for Schedule - B).

VIJAYAWADA DIVISION-ELECTRICAL/SOUTH CENTRAL RLY Description:- SITC of high quality long through multicolor Rectangular light, Protection Rating:IP66 or higher, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment-EN60598-1:2015", and "Electromagnetic Compatibility Directive - EN 61547: 2009", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast.

approval),CRI for White:>80.SDCM <3,Optics:PMMA with holder, Beam Angle:25°/45°/60°,Control:DmX 512 Channel:4CH, Body: Die casted/extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hotspot and light distribution: Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input: Constant DC 24V with external driver to the constant current decoder, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. The fixture will be suitable to operate in a temperature rangeof-10°Cto+60°C,The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 60,000 burning hours at L70 at

structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm,70micron Copper, 2WTC with Black or White masking, Copper /OSP finish. LM79, IK08, IP66, Surge, Endurance and thermal test from NABL Accredited laboratory. LED makes should be CREE, Lumil LED, Osram, Seoul, Nichia or equivalent, with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP68 connector having the length >300mm, BIS, CE & RoHS Certificates along with tender documents, Fixture body color has to match with Building.

Description:- SITC of high quality long through multi color Rectangular light, Protection Rating:IP66 or higher, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment-EN60598-1:2015", and "Electromagnetic Compatibility Directive - EN 61547: 2009", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. LED Fixture with 5050 LED, Power consumption:100W,CCT:RGBW(3000-7000K), (as per the design approval),CRI for White:>80.SDCM <3,Optics: PMMA with holder, Beam Angle:25°/45°/60°,Control:DmX 512 Channel:4CH,Body: Die casted/extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hotspot and light distribution: Optics Designed to minimize hot spots & fringing in color mixing applications. Power

surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. The fixture will be suitable to operate in atemperaturerangeof-10°Cto+60°C,The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 60,000 burning hours at L70 at

structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm,70 micron Copper,2W TC with Black or White masking, Copper /OSP finish. LM79, IK08, IP66, Surge, Endurance and thermal test from NABL Accredited laboratory. LED makes should be CREE, Lumil LED, Osram, Seoul, Nichia or equivalent, with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP68 connector having the length >300mm, BIS, CE & RoHS Certificates along with tender documents, Fixture body color has to match with Building.

VIJAYAWADA DIVISION-ELECTRICAL/SOUTH CENTRAL RLY Description:- SITC of high quality long through multi color Rectangular light, Protection Rating:IP66 or higher, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification

"Electromagnetic Compatibility Directive - EN 61547: 2009", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. LED Fixture with 5050 LED, Power consumption:50W, CCT:RGBW(3000-7000K), (as per the design approval),CRI for White:>80.SDCM <3,Optics: PMMA with holder, Beam Angle:25°/45°/60°, Control:DmX 512 Channel:4CH, Body: Die casted/extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hotspot and light distribution: Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input: Constant DC 24V with external driver to the constant current decoder, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. The fixture will be suitable to operate in atemperaturerangeof-10°Cto+60°C,The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 60,000 burning hours at L70 at 55 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm,70 micron Copper,2W TC with Black or White masking, Copper /OSP finish. LM79, IK08, IP66, Surge, Endurance and thermal test from NABL Accredited laboratory. LED makes should be CREE, Lumil LED, Osram, Seoul, Nichia or equivalent, with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP68 connector having the length >300mm, BIS, CE & RoHS Certificates along with tender documents, Fixture body color has to match with Building.

Description:- SITC of high quality long through multi color 4 Feet linear light 1000mm,Protection Rating : IP66 or higher, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment-EN 60598-1:2015", and "Electromagnetic Compatibility Directive - EN 61547: 2009",Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights.LED fixture with 5050 LED of system lumens 1650lm, Power Consumption: 80W, CCT :RGBW(3000-7000K) as per the design approval, CRI for white : >80, SDCM <3, Optics :PMMA with holder, Beam Angle : 25°/45°/60°, Control : DmX512 Channel : 4 CH, Body :Die casted / extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hotspot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : Constant DC 24V with external driver to the

if required will be added as per the requirement), Toughened transparent glass having the IK protection:IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixtures will be suitable to operate in a temperature rangeof- 10°Cto+60°C, The light fixtures should have IP68 air vent made up of brass/stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 60,000 burning hours at L70 at 55 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 70 micron Copper, 2W TC with Black or White masking, Copper/OSP finish. LM79, IK08, IP66, Surge, Endurance and Thermal test from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP68 connector having the length >300mm. BIS, CE& RoHS Certificates along with tender documents, Fixture body color has to match with Building color.

VIJAYAWADA DIVISION-ELECTRICAL/SOUTH CENTRAL RLY Description:- SITC of high quality long through multi color linear light 1000mm,Protection Rating : IP66 or higher, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification

"Electromagnetic Compatibility Directive - EN 61547: 2009",Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights.LED fixture with 5050 LED of system lumens 1650lm, Power Consumption: 50W, CCT :RGBW(3000-7000K) as per the design approval, CRI for white : >80, SDCM <3, Optics :PMMA with holder, Beam Angle : 25°/45°/60°, Control : DmX512 Channel : 4 CH, Body :Die casted / extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hotspot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : Constant DC 24V with external driver to the constant current decoder, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection:IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixtures will be suitable to operate in a temperature rangeof- 10°Cto+60°C, The light fixtures should have IP68 air vent made up of brass/stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 60,000 burning hours at L70 at 55 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 70 micron Copper, 2W TC with Black or White masking, Copper/OSP finish. LM79, IK08, IP66, Surge, Endurance and Thermal test from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP68 connector having the length >300mm. BIS, CE& RoHS Certificates along with tender documents, Fixture body color has to match with Building color.

Description:- SITC of high quality long through multi color linear light 1000mm,Protection Rating : IP66 or higher, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard "Low Voltage Directive & Protective Equipment-EN 60598-1:2015", and "Electromagnetic Compatibility Directive - EN 61547: 2009",Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights.LED fixture with 5050 LED of system lumens 1650lm, Power Consumption: 30W, CCT :RGBW(3000-7000K) as per the design approval, CRI for white : >80, SDCM <3, Optics :PMMA with holder, Beam Angle : 25°/45°/60°, Control : DmX512 Channel : 4 CH, Body :Die casted / extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hotspot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : Constant DC 24V with external driver to the

if required will be added as per the requirement), Toughened transparent glass having the IK protection:IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixtures will be suitable to operate in a temperature rangeof- 10°Cto+60°C, The light fixtures should have IP68 air vent made up of brass/stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 60,000 burning hours at L70 at 55 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 70 micron Copper, 2W TC with Black or White masking, Copper/OSP finish. LM79, IK08, IP66, Surge, Endurance and Thermal test from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP68 connector having the length >300mm. BIS, CE& RoHS Certificates along with tender documents, Fixture body color has to match with Building color.

VIJAYAWADA DIVISION-ELECTRICAL/SOUTH CENTRAL RLY Description:- SITC of high quality long through multi color linear light 1000mm,Protection Rating : IP66 or higher, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification

"Electromagnetic Compatibility Directive - EN 61547: 2009",Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights.LED fixture with 5050 LED of system lumens 1650lm, Power Consumption: 20W, CCT :RGBW(3000-7000K) as per the design approval, CRI for white : >80, SDCM <3, Optics :PMMA with holder, Beam Angle : 25°/45°/60°, Control : DmX512 Channel : 4 CH, Body :Die casted / extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hotspot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : Constant DC 24V with external driver to the constant current decoder, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection:IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixtures will be suitable to operate in a temperature rangeof- 10°Cto+60°C, The light fixtures should have IP68 air vent made up of brass/stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 60,000 burning hours at L70 at 55 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 70 micron Copper, 2W TC with Black or White masking, Copper/OSP finish. LM79, IK08, IP66, Surge, Endurance and Thermal test from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP68 connector having the length >300mm. BIS, CE& RoHS Certificates along with tender documents, Fixture body color has to match with Building color.

310*310*H420mm, Input voltage: DC24V, Power: 15W, Weight: 2KG.

270*120*H250mm, Input voltage: DC24V, Power: 10W, Weight: 1.5KG

Size:120*320*H300mm, Input voltage: DC24V, Power: 10W, Weight: 3KG

Size:470*250*H1350mm, Input voltage: DC24V, Power:36W, Weight: 4KG.

50Hz, Output : DC 12/24V, Protection rating, IP67, Surge protection : LL 4KV, LE 6KV.

cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multistrands copper conductors and it supports voltage grade upto1100V.

cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multistrands copper conductors and it supports voltage grade upto1100V.

data. DMX512 cable is used for connecting all light consoles that use DMX512 standard data transmission.

cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multistrands copper conductors and it supports voltage grade upto1100V.

below ground/road surface, to required depth complete for both power and Dmx.

Description:- SITC of 5pin XLR Male connectors having 5pole cable connector, Male/Female

ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability.

VIJAYAWADA DIVISION-ELECTRICAL/SOUTH CENTRAL RLY Description:- SITC of 5pin XLR Female connectors having 5pole cable connector, Male/Female

ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability.

Description:- SITC of Power Distribution Board made up of MS Sheet metal fabricated housing, black powder coated, and ivery connectors for the internal terminations and external outgoing

with required contactor for auto switching. Power panel suitable for indoor/outdoor applicable and floor mount/wall mount options.- 2 Nos of 32A TPN MCB Outgoing MCBs., - 1No of 100A TPN Incoming MCB.

Description:- SITC of Power Distribution Board made up of MS Sheet metal fabricated housing, black powder coated, and ivery connectors for the internal terminations and external outgoing

with required contactor for auto switching. Power panel suitable for indoor/outdoor applicable and floor mount/wall mount options.- 12 Nos of 6/10A SP Outgoing MCBs., - 1No of 32A TPN Incoming MCB.

terminations and external outgoing connecting points, fiber/brass glands of suitable size fitted MCB control for outgoing circuits.

outputs from a 1 input and Input voltage:AC110 to 220V,50Hz, Product features:Group 1 & group 8 DMX signal change.

distances. Signal regeneration: Boosts weakened DMX signals after long-distance transmission. Input Voltage: 12V/24V, IP Rating: IP20.

Description:- SITC of Din Rail Mount DMX controller can be used to control a wide variety of different DMX systems-from RGB/RGBW to more advanced moving and color mixing luminaires, DMX audio players and fountains. The controller comes with a variety of features, iPhone/iPad/Android

DmX channels universe in live mode(computer), 8 dry contact trigger ports via HE10 connector, standalone mode with 5 area and 90+ scenes, MacOSx10.6/10.7/10.8- WindowsXP/VISTA/SEVEN/832/64 bits and USB2.0, XLR3, mini USB, 1 HE10, Power From 5V to 5.5V DC (AC/DC adapter in option.)

junction box etc. including clamping etc.

27 Description:- SITC of Programming as desired by Railway site Engineer.

condition consisting of clamps, brackets, angles, conduits, joints, hardware's like fasteners, nut & bolts etc.,

specifications - a) Normal soil trench work.

a) Supply. VIJAYAWADA DIVISION-ELECTRICAL/SOUTH CENTRAL RLY

b) Fixing, testing and connecting by (Stiff Numbers 5408.00 pendent) suspension by 02 No. of MS flats of suitable size & length fixed on sheds/Shelter/Trusses of the roof duly wiring up to 3mtrs length by 2nos of PVC insulated multi strand copper conductor of 1.5sq.mm size with PVC ceiling rose with PVC round block by screws/nails complete by the contractor including MS flats with red oxide coating and Aluminium painting as desired by site Engineer. Total 4640064.00 Supply and fixing of Integrated 4'-20W LED (Indoor) tube light fitting surface mounted including Item- 2 power LEDs complete with all accessories and confirming to latest Specifications. S No. Item Description of Item Unit Qty Rate Amount No

b) Fixing and connecting on 2Nos.of TW/PVC Numbers 6446.00 round blocks with nails/screws, or as desired by railway Site Engineer. Total 2642860.00 Supply and erection of 100W LED High bay light with PDC housing suitable for celing Item- 3 (Surface/Suspended) mounting with System efficiency 150LM/W, complete with necessary mounting accessories, clamps and hardware etc. as per latest specifications. S No. Item Description of Item Unit Qty Rate Amount No

b) Erection Total 495246.96 Supply fixing, testing and connection of 120W LED type weather proof flood light fitting including Item- 13 power LED's complete with all accessories and confirming to standard latest Specification. S No. Item Description of Item Unit Qty Rate Amount No

b) Fixing , testing and connecting of LED light Numbers fitting with supply of all connecting accessories ( walls/ Terrace/ column/ Tubular poles/ Rail poles/ Galvanised poles etc). Total 1369053.00 a) Supply and wiring of concealed / Surface point wiring (without PVC conduit/PVC Casing caping) by 02 Nos., of 1.5sq.mm PVC insulated, multistrand copper conductor with 1.5sq.mm one no.of PVC Item- 18 insulated multistrand copper conductor for earth continuity as per specification enclosed. The price shall also includes 6A, module switch. b) Supply and fixing of PVC conduit pipe/PVC casing & caping with Elbows & Jn.boxes etc. for point wiring as per specification enclosed. S No. Item Description of Item Unit Qty Rate Amount No

a) Supply and wiring of concealed / Surface point Point wiring (without PVC conduit/PVC Casing caping) by 02 Nos., of 1.5sq.mm PVC insulated, multistrand copper conductor with 1.5sq.mm one no.of PVC insulated multistrand copper conductor for earth continuity as per specification enclosed. The price shall also includes 6A, module switch.

b) Supply and fixing of PVC conduit pipe/PVC Point casing & caping with Elbows & Jn.boxes etc. for point wiring as per specification enclosed. Total 349000.00 Supply and wiring of concealed / surface, Inside mains by 02 Nos., PVC insulated multi strand copper conductor of the following sizes along with earth continuity by one no.of specified size PVC Item- 19 insulated multi strand copper conductor through PVC conduit / casing and caping as per specification enclosed. S No. Item Description of Item Unit Qty Rate Amount No

a) 4.0 sq.mm with 2.5 Sq.mm

b) 2.5 sq.mm with 1.5 Sq.mm VIJAYAWADA DIVISION-ELECTRICAL/SOUTH CENTRAL RLY Total 413230.00 Item- 20 Provision of Earthing arrangements S No. Item Description of Item Unit Qty Rate Amount No

i) Excavation of earth for one pit in any soil and Numbers refilling.

ii) Supply and erection of "B' class GI pipe dia Numbers 50mm, 3.1 mtrs length with 3.65 mm thickness including GI socket and nuts (3.1 mtrs ) including drilling of 12mm holes as per the RDSO Drg No. ETI/OHE/P/ 7021 (MOD.A) or if any latest. Earth electrodes shall be procured from CORE approved sources only , List of CORE approved sources is enclosed as Annex-CORE List).

iii) Supply and filling of Charcoal

iv) Supply and filling of Salt

v) Supply and erection of pre fabricated RCC of Each size 0.55m X 0.55M (550mm) with wall thickness of 0.125m(125mm) with height 0.3m (300mm) along with RCC(1:4:8) cover with .04m thickness(40mm) and funnel with wire mesh.

vi) Supply, laying and connecting of 25x3mm GI RM F l a t with 40GSM Zink coated, conforming to IS:280-2006 or latest, it is to be laid & connected from equipment to earth electrode for continuity.

vii) Transportation charges inclduing loading & Lumpsum u n l o a d i n g of earthing arrangemnts system material to site / location. Total 173500.00