Loading
Loading…
Loading…
Tender Value
₹4.2 L
EMD Value
₹10,592
Closing Date
19 Oct 2026, 6:00 pmClosed
Assistant Executive Engineer
Assistant Executive Engineer, PWD electricalsubdivision kasaragod
Electrical works
2026_PWD_879095_1
PWD/BLDG/TR/15093/2026_6_1_1/1
Open Tender
Electrical Works
Percentage
Kasaragod
Please refer Tender documents.
11 documents required · 11 mandatory
₹935
₹10,592
13 Oct 2026
13 Oct 2026
22 Oct 2026
13 Oct 2026
19 Oct 2026
13 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Electrification | |||||
| 1.001 | 1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group C | 30 | point | 1,576.54 | ₹47,296.2 |
| 1.002 | 1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. | 30 | each | 93.15 | ₹2,794.5 |
| 1.003 | 90.3.21.3:Supply & installation of light fittings on 'C/U' shaped flat iron bracket
Supply, conveyance, installation, testing and commissioning the light fittings of following types made from 0.5mm CRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. 'C/U' brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture | 2 | each | 1,314.7 | ₹2,629.4 |
| 1.004 | 90.3.20.3:Supply & installation of light fittings on TW round block
Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture | 4 | each | 1,262.82 | ₹5,051.28 |
| 1.005 | OD144787/2026-2027:Supply , conveyance , installation and testing of recess/surface mounting down light fittings 36W 3600 lumen square (2ft X 2ft) recessed fitting made of crca sheet of thickness 0.5mm, having efficacy not less than 110 l/w, pf greater than 0.95, THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea all types complete with all accessories in the existing opening of false ceiling, giving connections with the existing wire etc., as required.conforming to relevant ISS or extending the original wiring and giving connection etc. as required. | 18 | each | 3,193.18 | ₹57,477.24 |
| 1.006 | OD144862/2026-2027:supply conveyance installation,testing, commisioning of 450 sweep metal wall fan, fixing
necessary clamps ,anchor bolts/bolt and nuts etc, as required including giving connections with
the supplied wire along with the fan -- | 12 | no | 4,878.3 | ₹58,539.6 |
| 1.007 | OD138064/2026-2027:Supply Conveyance, installation, testing and commissioning of 50W LED Flood light output greater than 120lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | 18 | each | 3,820.4 | ₹68,767.2 |
| 1.008 | 90.4.2:Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required. | 2 | each | 198.67 | ₹397.34 |
| 1.009 | 90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. | 4 | each | 181.11 | ₹724.44 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
viewsbd.pdf
Tender Documents • 2.03 MB
materialslist.xls
Additional Documents • 0.18 MB
BOQ_1494370.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .