Strengthening of Bhadyani Pumping Water Supply Scheme in Bhimtal, Nainital

Amount

Construction of Boulder Filled Gallery 4 m. wide including Supply & Carting of all material labour T & P etc. complete in all respect as per type design.

Construction of R.C.C Intake chamber 2.3 m deep, including Supply & Carting of all material labour T & P etc. complete in all respect as per type design.

Providing and laying of wire crates 3 m x 1.5 m x 1.5 m in Nos. size with a 8 gauge BWG GI wire

Supply Carting and Laying into the trenches for rising main by welding joint required for proper complition of work MS ERW pipe 50mm dia 4.8mm thick.

Painting of ERW pipe with 2 coats of approved quantity (Anti-corrosive paint over one coat of primer) 50mm dia pipe.

Supply & fixing of following Size of Valves and Fittings

50mm dia. Cast steel Sluice / Scour Valve, W.P. 30 Kg/cm2

50 mm dia. Cast steel Reflux / Swing Check Valve, W.P. 30 Kg/cm2

Supply of G.I. medium pipes & specials fittings Excluding Cartage) lowering them into trenches, laying true to alignment and gradient, laying and jointing of pipe line including cutting and threading of pipe for making up lengths as required for proper completion of work of following sizes.

20 mm Dia

25 mm Dia

32 mm Dia

40 mm Dia

Supply & Fixing of following fittings including cartage of materials labour, T&P etc. complete GM Gate Valves

20 mm Dia

32 mm Dia

40 mm Dia

Excavation of earth for pipe line in following strata lift upto 1.50 m. and lead upto 30.00 m. including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60.00 m. from trenches including supply of labour T&P etc. all complete. It is estimated that 75% excavation will be in soil mixed with shingle, bajari & boulders and rest 25% will be in medium rock. Soil mixed with Shingle, Boulders etc

Medium Rock

Supply of all material labour T&P etc and construction of Gate/Wheel valve Chamber as per type design 90x90x100 cm

Supply of all materials, labour, T & P etc and construction of Air Valve & Water Meter Chamber as per type, design (Size :- 0.6 m x 0.6 m x 0.75 m)

Construction of masonry Chamber Size 60x45x50 cm brick work 1:4 with locking arrangment and 12 mm thick plaster finising Supply of all material labour T&P etc, As per Design and Drawing

Supply and fixing of the following fittings including cartage of materials, labour, T & P etc complete

C.I Air Valve 20 mm

Supply of all materials, labour, T & P etc. and Construction of Thrust Block as per type design complete (1 in 200 m length Pipeline)60x60x60 cm

Protection work

Excavation of foundation

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Cement Concrete Flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, and nalla portion.

Random Rubble Masonry with Hard Stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside & inside of the tank, M.S. M.H. cover with locking arrangement, supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2.

Provision of Cartage of Pipe & Specials

Supply of all materials, labour, T&P etc and provide Functional House Tap Connection (FHTC) to every household with 15 mm dia 12 meter pipe

Provision of Iron Gate with Pillars of size as required complete 80 KG

Misleniues item Barbed wire fencing with Angel iron 50x50x6mm

Provision for 1.50mtr Boundry Wall in Brick masonry

Provision for Pumping Plants as per Detail sheet------

Supply of Electrick Driven high head horizontal Multistage Centrifugal clear water Pump 100 lpm discharge and 210 mte head complete coupling and coupling Guards

Supply of 20 H.P Crompton Electrick Motor 415+/-3 phase 50HZ

Supply of MS Fabrication heavy duty base Plate for Mounting above pump and Motor

Supply of Fully Automatic Auto Transformer starter 20 HP Suitable to control above motor with transformer oil

Supply of 100 AMPs Three Phase Main Swich with neutral link

Supply of dust and vermin proof cubical type floor mounting type control panel made out of 14 SWG sheet steel having bus bar chamber with copper bus bar comprising of following having one No.incoming &2 Nos Outgoing

Power wiring and Earthing Materials all material Complete

Main Piping and Valve Sunction side delivery side and byepass Arrangment

Provision for Gauges Pressure Gauges 100 mm and Compound Gauge 100 mm dial with fittings 2 nos

Supply of tools reqiued for Maintienance of pomping plants

Supply of Rubber resistentance Sheet 1x2x.025m

Installation and Commissioning of Pumping Plants with all Acessories inside the Pump house and Testing inner and outer side and Painting of pump plants 2 coats Supper enamel paint

Painting of entire installation with 2 coats of super enamel paint as per direction of Engineer-Incharge of works

Cartage of Pumping plants and all acessories to side

REPAIRING & PAINTING WORK OF OLD PUMP HOUSE BUILDING AT IPS.

Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge In cement mortar

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): From brick work in cement mortar

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix 1:6 (1 cement : 6 fine sand)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :150x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :100 mm (9.66.2)

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work

KEDAR PALARIYA CONTRACTOR