Resurfacing of Kalarvandh Daha Road Km. 0/0 to 5/00 Ta. Abdasa Dist. Bhuj-Kachchh under Budget Lump Provision-Year 2023-24 (Normal)(5th attempt)

No. figures Amount

1 Clearing and grubbing road land including uprooting wild vegetation 2.00 Hect. 28393.04

grass bushes, shrubs, sapling and trees of girth up to 300mm

removal of stumps of trees cut earlier and disposal of

unserviceable materials and stacking of serviceable materials as

per Clause-201 (area of light density) by mechanical means in area

of light jungle.

2 Earthwork in cutting including preparing the slope and camber and 1200.00 Cum 248.16

stacking or utilizing the cutting stuff in spoil bank as directed upto

200 meters from the end of cutting with all lead and lift. (A) Hard

3 Earth work for embankment including breaking clods, dressing with 1010.00 Cum 172.87

all lead and lift (Including watering and consolidation) (C) from

borrow area within all lead and lift (with minimum 6% CBR)

4 Rolling and watering of earthwork in layers with power roller 1200.00 Cum 22.48

including filling in depressions which occur during the process.

5 Box cutting the road surface to proper slope and camber for 591.00 Cum 104.04

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed upto all lead

6 Providing and laying W.B.M. of M.C. metal of size 45 mm to 90 338.00 Cum 1198.87

mm size including 0.27 Cu.M. stone screening & 0.08 Cu.M. stone

dust as filler including spreading, watering & consolidation by

vibratory roller 80KN to 100KN static weight. 100 mm thick

compacted.

7 Providing and laying W.B.M. of M.C. metal of size 45 mm to 63 254.00 Cum 981.72

mm size including 0.12 Cu.M. Stone screening & 0.08 Cu.M. stone

dust as filler including spreading, watering & consolidation by

vibratory roller 80KN to 100KN static weight. 75mm thick

compacted.

8 Providing and laying compacted of specified murrum in side 1000.00 Cum 379.76

shoulder including carriage of material and spreading on prepared

base including compacting as per MOST specification etc.

9 Providing and laying bituminous grout 37.5mm compacted thick 1138.00 M.T. 1841.23

using B.T. stone aggregates as per required gradation with the

asphalt VG-30 grade for tack coat 2.5 Kg/10 Smt on B.T. surface

and 4.0 Kg/10 Smt on W.B.M. surface and asphalt VG-30 grade

for mixing @ 1.99% i.e. 19.90 kg./ MT by weight of mix including

heating and mixing in drum mix plant transporting the mix,

spreading the same by pavers finisher and consolidation as per

MORTH specification including cost of all materials fuels, labors,

tools and plant etc. using contractors own drum mix plant etc.

completed as directed.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

10 Providing and laying 37.50 mm thick compacted B.M. using stone 1251.00 M.T. 2431.07

chips 0.66 Cum/1 M. ton mix as per gradation with Asphalt VG-30

for tack coat @ 2.50 kg./10 Smt. on B.T. surface and asphalt grade

VG-30 for mixing @ 34 kg/M.Ton (i.e. 3.40% of mix) including

heating the and aggregate by continuous batching drum mix plant,

transporting and mixed material and spreading the same by paver

finisher and consolidation by vibratory roller of 80 KN to 100 Kn

static weight including the cost of labour oil, lubricants etc. using

contractors own machineries and plant.

11 Providing and laying bituminous seal coat with stone chips 6 to 10 414.00 M.T. 2642.16

mm size 0.18 Cmt/10 smt i.e. using 0.66 cmt aggregate per M.T

mix using asphalt VG-30 @ of 4.50% of mix including heating the

asphalt and aggregate by continuous batching drum mix plant and

paver finisher and consolidating by vibratory roller including

providing equipment, tools, plant, firewood, oil, kerosene, labour

charges etc. using the contractors own machinery and plant.

12 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse 347.00 Cum 2830.46

sand : 8 machine crushed stone aggregates 40 mm nominal size)

and curing complete in foundation and plinth.

13 Proving and laying cement concrete grade M-20 (1-Cement : 1.5 860.00 Cum 4744.98

sand : 3 coarse aggregate 20mm nominal size) for C.C. road and

curing etc. complete including cost of formwork, finishing the

cement concrete road by Trimix process inclusive of labour

charges for trimix vaccume dewatering process on cement

concrete road by using vaccume dewatering pump, surface floater,

including chanelling and making grooves & rough finish to surface,

providing expansion joint, construction joint including filling the joint

with asphalt filler as per direction by engineer in charge and as per

specification.

14 Providing I.S.I. mark T.M.T. bar Fe-500D reinforcement for R.C.C. 13.50 M.T. 76214.60

work including bending, binding and placing in position complete

upto floor two level.

15 Providing & fixing “FLOOD GUAGE POST ” on causeway / Dip 6.00 No. 2066.08

having “[“ channel size 100 x 50 mm i.e. C.C. 1:2:4 in headwall i.e.

painting & lettering with ordinary paint colour as per instruction of

engineer in charge.

16 Providing & fixing “FLOOD WARNING POST ” on causeway / Dip 6.00 No. 4100.40

having rectangular size (1.20 mtr. x 0.90 mtr.) 20.00 Gauge thick

M.S. Plate & 2.90 mtr. deep double angle 60 x 60 x 6 mm size

including fitting the M.S. Plate in double angle 30 x 30 x 6 mm size

painting & lettering with ordinary paint colour as per instruction of

engineer in charge. (fixing in C.C. 1:2:4)

17 Providing and fixing ordinary kilometer stone of precast C.C. 1:2:4 5.00 No. 704.33

including necessary reinforcement as per I.R.C. type design in

C.C. 1:4:8 including painting, lettering etc. complete (For O.D. road

18 Providing and fixing Hectometer stone as per I.R.C. type design 20.00 No. 116.08

including painting, lettering etc.complete (i) Fixing in earth.

19 Providing and fixing Guard stone as per I.R.C. type design 125.00 No. 98.63

including white washing etc. complete (i) Fixing in earth.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

20 Direction sign (Junction board) :- Providing and fixing sign boards 1.00 No. 14831.71

made out of 2mm aluminium sheet size 244 x 122cms. rectangle

as per the design of IRC-67-1977 pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint, reflectorised with retro

reflective sheeting as per latest M.O.S.T. specifications; Letters

and numerals should be as per IRC-30-1968, 3.1m long (2 nos)

stand post and frame fabricated from suitable size iron angle of

x 50 x 5mm, 75 x 75 x 6mm as required painted with best quality

epoxy coatings in black and white bends. The details of symbol or

inscription / numerals for each board shall be as per the instruction

of engineer in charge. The fixing at site shall be in 1:2:4 CC block

of size 45 x 45 x 60cms. for each leg including excavation curing

etc. complete under the supervision of engineer in charge. (A)

Engineer Grade (VR)

21 Regulatory / Mandatory signs : Providing and fixing sign boards 20.00 No. 3439.81

made out of 2mm aluminium sheet size 60cms. diameter circle as

per the design of IRC-67-1977 pre treated with phospheting

process & acid eteching, coated with one coat of epoxy primer and

two coats of best quality epoxy paint, reflectorised with retro

reflective sheeting as per latest M.O.S.T. Specifications; 3.1m long

stand post and frame fabricated from suitable size iron angle of

x 35 x 3mm, 75 x 75 x 6mm as required; painted with best quality

epoxy coatings in black and white bends. the details of symbol for

each board shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg including excavation curing etc. complete

under the supervision of engineer in charge. (A) Engineer Grade

22 Village name/ Bump Ahead sign :- Providing and fixing sign board 2.00 No. 5045.36

made out of 2 mm alluminium sheet size 90 x 60 cms rectangle as

per the design of IRC-67-1977 pre treated with phospheting

process and acid etching coated with one coat of epoxy primer and

two coats of best quality epoxy paint reflectorised with retro

reflective sheeting as per latest M.O.R.T.H. specifications. Letters

and numerals should be as per IRC-30-1968, 310m long (2 Nos.)

stand post and frame fabricated from suitable size iron angle of

x 50 x 5 mm painted with best quality epoxy coating in black and

white bends. The details of symbol or inscription / numerals for

each board shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 C.C. block of size 45 x 45 x

cms for each leg including excavation, curing etc. complete under

the supervision of Engineer-in-charge (A) Engineer grade (VR).

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

23 Hazard Marker Sign :- Providing and fixing sign board made out of 4.00 No. 2423.74

2mm aluminium sheet size 90 x 30 cms. rectangle as per the

design / drawing attached (IRC) pretreated with phospheting & acid

etching, coated with one coat of epoxy primer and two coats of

best quality epoxy paint reflectorised with retro reflective sheeting

as per latest M.O.S.T. specification, 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm &

50 x 50 x 5mm painted with best quality epoxy coatings. The fixing

at site shall be in 1:2:4 C.C. block of size 45 x 45 x 60cms for each

leg including excavation curing etc. complete under the supervision

of Engineer in charge. (A) Engineer grade (VR).

24 STOP SIGN :- Providing and fixing sing boards made out of 2mm 2.00 No. 4676.06

aluminium sheet size 90 x 90cms. rectangle as per the design of

IRC-67-1977 pretreated with phospheting process & acid etching,

coated with one coat of epoxy primer and two coats of best quality

epoxy paint reflectorised with retro reflective sheeting as per latest

M.O.S.T. specifications; 3.1m long stand post and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as

required; painted with best quality epoxy coatings in black and

white bends. The details of symbol for each board shall be as per

the instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC block of size 45 x 45 x 60cms. for each leg including

excavation curing etc. complete under the supervision of Engineer

in charge. (A) Engineer grade (VR).

25 Cautionary Warning Sign :- Providing and fixing sign board made 20.00 No. 3808.66

out of 2mm aluminium sheet size 90 x 90 x 90 cms equilateral

triangle as per the design of IRC-67-1977. Pre treated with

phospheting process and acid etching coated with one coat of

epoxy primer and two coats of best quality epoxy paint,

refloctrorized with retro reflective sheeting as per the latest

M.O.R.T.H. specification, 3.1 Mt. long stand post and frame

fabricated from suitable size iron angle of 35 x 35 x 3 mm, 75 x

x 6 mm; painted with best quality epoxy coating in black and white

bends. The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4

CC block of size 45 x 45 x 60 cms for each leg, including

excavation curing etc. complete under the supervision of Engineer-

in-charge. (A) Engineer grade (VR).

26 Dismentaling the existing structure including removing and 560.00 Cum 886.05

stacking the dismentelled materials as and where directed. (A)

R.C.C. work.

TOTAL Rs.

i.e. Rs. One Crore Fourty Seven lacs Fourteen thousand Four hundred Sixty Five and Twenty Two paisa

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

5. Credit for dismantalled materials of amount of Rs. 1,68,000.00 must be recovered from 1st R.A. bill of

Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Nalia Bhuj-Kutch Bhuj-Kutch