SPECIAL REPAIR TO BUILDING NO P-795 AT AF STN BHUJ

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

Material and labour for Precast cement concrete block masonary with solid blocks exc 10cm in width Type C1 (1:3:6) 20mm graded and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge

Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame). complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed by Engineer-in-Charge.

Supply & fix PVC door PDS-01 comprising of shutter and frame of Make : Rajshree/Accura Polytech Pvt Ltd (Accucel) all as shown on drg No.CEAA/TD/149 sheet No. 1/1 (PVC RIGID FOAM) , door frame/ chowkats of solid rigid foam profile FP-6030 and shutter of solid PVC foam profile FP 7114 with 4 mm thick high pressure compact laminate as infill (Panel) including necessary hardware fittings complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminium fully glazed door with shutter and frame with one or more rebates made out of JINDAL/INDAL anodised aluminium sections, shutters fixed with floor spring hinge (ISI marked) including jointing cleats for fixing etc complete all as specified with panel of 6 mm thick tinted glass (tint of glass as approved by GE), clips, rubber packing, anodised aluminium snap beading, screws and aluminium fittings all as shown on drg No. CEAA/TD/132 sheet 1/2 and 2/2 except fixed glazing (FG) complete all as specified and directed by Engineer-in-Charge.

Material and labour for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) complete all as specified and directed by Engineer-in-Charge.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately. Note : main section of aluminium shall be used 100mmx45MM with same thickness as mentioned in lieu of drg 65mm x 38mm above reffered due to less space available for fixing wire gauge shutter fixing grill.

Supply , fabricate & fix anodised (15 micron) aluminium sliding windows/ ventilators made out of Jindal/Hindalco Aluminium sections as in frames , sliding/ fixed shutters etc. With one or more rebates incl. Jointing cleats & locking arrangements complete all as specified & as per manufacturer's instruction. Note- Quoted rate shall deemed to be included for supply of aluminium sections, fabricate & fixing in position of window frames & shutters, locking arrangements complete all as specified and directed by Engr-in-Charge.

Supply & fix rubber beading for fixing of glass of item No 9 above complete all as specified and directed by Engr-in-Charge.

Material and labour for aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 4.4 mm x 7mm complete all as specified and directed by Engineer-in-Charge.

Supply & fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih SS wire staples complete all as specified and as directed by Engineer-in-Charge.

Supply & fix aluminium, anodised 100mm size of hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Material & labour for 10mm thick rendering on vertical surface in cement motar 1:4 as backing coat complete all as specified and directed by Engineer-in-Charge

Material & labour for glazed digital ceramic coloured tiles Ist quality in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land complete all as specified and directed by Engineer-in-Charge.

Material & labour for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors complete all as specified and directed by Engr-in-Charge.

Material & labour for non skid ceramic coloured tiles 7 to 8mm thick (sqaure/rectangular) area of each tiles exc. 0.06Sqm but n.exc. 0.11Sqm as per IS - 13755 in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge

Material & labour for vitrified ceramic dark shade 10 mm thick (sqaure/rectangular) area of each tiles n.exc. 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing tiles and including 15 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge

All as per item No 20 above but on vertical surfaces such as in skirting and dados laid over plaster in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Material & labour for 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in plinth protection/ path and finished with fair and even without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material & labour for in repairs for 20mm thick granite, Z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 15mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces complete all as specified and directed by Engineer-in-Charge.

Material & labour for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

Material & labour for rendering on concrete surfaces 15mm thick in two layers first coat 10mm thick in CM 1:6 and second coat 5mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and fair complete all as specified and directed by Engineer-in-Charge

Supply only water proofing compound complete all as specified and directed by Engineer-in-Charge.

Taking up on down steel tubing and connection incl cleaning for refining complete all as specified and directed by Engineer-in-Charge of the following bore of pipe

15mm bore of pipe

20mm bore of pipe

25/32mm bore of pipe

Supply & fix CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge of following sizes:-

20mm bore of pipe

25mm bore of pipe

32mm bore of pipe

Supply & fix in repair grating doom 125mm dia with waste hole of PTMT (minimum weight 40 grams) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engineer-in-Charge.

Dismantling of cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer-in-Charge of the following bore of pipe

100/110mm bore of pipes

75mm bore of pipe

Supply & fix UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors complete all as specified and directed by Engineer-in-Charge of following sizes:-

110mm bore of pipes

75mm bore of pipe

Supply & fix UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement of following sizes complete all as specified and directed by Engineer-in-Charge of following sizes:-

110mm bore of pipe

75mm bore of pipe

Supply & fix PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge of the following sizes:-

110mm bore

75mm bore

Supply & fix PVC (SWR) vent cowl any radius complete all as specified and directed by Engineer-in-Charge of following sizes:-

110mm bore

75mm bore

Supply & fix in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement with 75mm outlet dia complete all as specified and directed by Engineer-in-Charge.

Supply & fix 32mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed by Engineer-in-Charge.

Material & labour for vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 x 460 mm, bowl size 410 x 330 x 180 mm complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs stainless steel plate rack made out of 1mm thick stainless steel sheet, overall minimum size 60cm x 90cm and for 6 plates complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs of UPVC 'P' trap 110x110mm,setting and jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs 20/22mm dia fancy type SS 304 grade curtain rods with wall thickness not less than 1.25mm, fixed to walls with and including a pair of fancy type SS brackets and SS clamps best quality as approved by GE complete all as specified and directed by Engineer-in-Charge. (Note - Length of curtain rod shall be measured and paid for as one unit. Quoted rate is deemed to include for provision of a pair of brackets and clamps per unit length) .

Supply & fix waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed soil complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 Ltr capacity complete all as specified and directed by Engineer-in-Charge.

Supply & fix vitrious china squatting pan ,Orrissa Paattern Size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs chromium plated mixing valve (central hole basin mixer) with small spout without popup waste system with 450mm long braided hoses including three joints to steel pipe or unions complete all as specified and directed by Engineer-in-Charge.Make : Jaquar, Cat No - QQT-7167B or any other equivalent make as approved by GE.

Supply & fix in repairs chromium plated soap dish holder complete all as specified and directed by Engineer-in-Charge. Make : Jaquar, Cat No - AQN-7731 or any other equivalent make as approved by GE.

Supply & fix in repaires chromium plated towel rail 24" long between flanges complete all as specified and directed by Engineer-in-Charge. Make : Jaquar, Cat No - AQN-7711 or any other equivalent make as approved by GE.

Supply & fix in repairs of vitreous China wash basin including pedastal, white, flat back, size 630mm x 450mm including chromium plated waste coupling, plug and chain, necessary brackets complete all as specified and directed by Engineer-in-Charge. Make : CERA, Cat No - 1008 & 1108 or any other equivalent make as approved by GE

Supply & fix in repair bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia of pipe complete all as specified and directed by Engineer-in-Charge.Make : Jaquar, Cat No - QQT-7037 or any other equivalent make as approved by GE

Supply & fix in repairs Angular stop cock with adjustable wall flange, cast coper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe complete all as specified and directed by Engineer-in-Charge.Make : Jaquar, Cat No - QQT-7053 or any other equivalent make as approved by GE

Supply & fix in repairs chromium plated mixing valve, wall mixer 3 in 1 system with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe including three joints to steel pipe or unions complete all as specified and directed by Engineer-in-Charge.Make : Jaquar, Cat No - QQT-7281 or any other equivalent make as approved by GE

Supply & fix in repairs chromium plated shower rose overhead single flow 100mm dia (ABS chrome plated) without Arm including fixed to steel pipes or union complete all as specified and directed by Engineer-in-Charge.Make : Jaquar, Cat No - OHS-1989 or any other equivalent make as approved by GE

Supply & fix in repairs PVC shelf fixed to walls with screws including necessary drilling holes complete all as specified and directed by Engineer-in-Charge. Make : Prayag or any other equivalent make as approved by GE

Supply & fix in repairs PVC corners fixed in bath rooms with screws including necessary drilling holes complete all as specified and directed by Engineer-in-Charge.Make : Prayag or any other equivalent make as approved by GE

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern)(wall hung type) white (excluding, flushing cistern and flush pipe) complete connected to drain complete all as specified and directed by Engineer-in-Charge.Make : CERA, Cat No - 2033 & 2315 or any other equivalent make as approved by GE

Supply & fix in repairs jet spray to EWC with PVC nozzle, PVC fish plates and PVCflexible pipe complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs chromium plated toilet paper holder complete all as specified and directed by Engineer-in-Charge. Make : Jaquar, Cat No - AQN-7751 or any other equivalent make as approved by GE

Supply & fix in repairs chromium plated metropole flush valve dual flow concealed type woth control cock operation plate 40 mm size including fixed to steel pipes or union complete all as specified and directed by Engineer-in-Charge.Make : Jaquar, Cat No - FLV-1089Q or any other equivalent make as approved by GE

Supply & fix rotational moulded polythene white water storage tank tripple layared (cylindrical , vertical with closed top , ISI marked , ) hoisted and fixed in position all as specd in SSR Part 1 of capacity 750 ltrs including taking down existing tank also including provision of 20 mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum wt 455 gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix rotational moulded polythene white water storage tank tripple layared (cylindrical , vertical with closed top , ISI marked , ) hoisted and fixed in position all as specd in SSR Part 1 of capacity 1000 ltrs including taking down existing tank also including provision of 20 mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum wt 455 gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair 15 mm bore gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.

Material & labour for providing cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in roof kerbs, mud stops, filling in frames and the like rounded or or chamfered on edges complete all as specified and directed by Engineer-in-Charge.

Supply & fix 18mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge.

Supply & fix 18mm thick plain PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge.

Supply & fix 12mm thick plain PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge.

Supply & fix 5mm thick plain PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge.

Supply and fix PVC coated basket for kitchen drawers of required size and including sliding channels complete all as specified and directed by Engineer-in-Charge.

Supply & fix100mm size extruded, brass handle fabricated type polished complete all as specified and as directed by Engineer-in-Charge .

Supply & fix 75mm size butt hinges,cast brass with mild steel hinge pin bright polished complete all as specified and as directed by Engineer-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge

Supply & fix anodised aluminium snap grid of size 605x605mm frame work for false ceiling complete all as specified and directed by Engr-in-Charge.

Supply & fix 12mm thick perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, on snap grid fixed in ceiling or laid/ inserted to GI/ Aluminium framework with screws complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steelv work of any description not otherwise provided complete all as specified and directed by Engr-in-Charge.

Supply & fix mild steel work in tubular trusses/structures of square/round/ rectangular pipes, rafters, purlins including special shaped washer etc. complete using ERW or inductuin butt welded tubes confirming to IS-1161-1998 grade St-240 including notching, drilling, fitting, rivetting and or welding or connecting bolts and nuts, cleats, gusset plates etc complete all as specified and directed by Engr-in-Charge.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-Charge.

Supply & fix prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge

Supply & fix pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed by Engineer-in-Charge.

Supply & fix polycarbonate rainwater gutter sheet fixing with clamps and other necessary fittings complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of old wooden painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Material & labour for preparing new or previously untreatedsteel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer on steel surfaces complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new or previously untreated concrete extrernal surfaces and applying two coats of exterior emulsion paint complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment on wall surfaces and applying two coats of distemper over a coat of wall care putty by finishing the surfaces even and smooth complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment on wall surfaces and applying two coats of exterior grade plastic emulsion paint over a coat of primercomplete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants,regulators, sockets etc.incl removing materials to store for kepping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed by Engineer-in-Charge.

Taking down main switch/DB’s/ energy meter including MCB’s with board and fixture of any description and making good disturbed surface of walls etc complete all as specified and directed by Engineer-in-Charge.

Taking down old light fittings of any description and making good disturbed surface of walls etc complete all as specified and directed by Engineer-in-Charge.

Taking down old submain wiring of any size complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 Volts grade conforming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part I ) ISI marked with wall thickness not less than 1.8mm with sunk cast iron/pressed steel terminal boxes made out of 1.2mm thick sheet including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5mm FRLSH PVC insulated unsheathed copper earth wire including Suitable for switches and sockets complete all as specified and directed by Engineer-in-Charge.

One light point controlled by one, one way switch single pole piano type

One Fan/exhaust point controlled by one, one way switch single pole piano type each

One 3 pin 5/6 Amps socket out let on independent board

One 3 pin 5/6 Amps socket out let on same board

All as per item No 95 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15/16 Amps socket out let on independent board. complete all as specified and directed by Engineer-in-Charge.

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 6 Sqmm single core, copper conductor drawn through PVC Casing capping and 6 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engineer-in-Charge (Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit).

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through PVC Casing caping and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engineer-in-Charge (Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit) .

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 2.5 Sqmm single core, copper conductor drawn through PVC Casing caping and 2.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engineer-in-Charge (Note: Two runs of conductor with one run of earth wire will be measured & paid as one unit) .

Supply & fix surface mounting LED 2X2 feet luminaire with white acrylic flat light dissipater with LED light source of 36 Watt of size 2’x2’(Feet) square shape suitable for surface mounting complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing in replacement wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 20 W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing in replacement wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting complete all as specified and as directed by Engineer-in-Charge.

Taking down existing geyser of any capacity , and reinstalling the same after servicing in the same position complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement energy saving ceilling fan 1200mm sweep and connecting up including provision of cable from ceilling rose or connector to fan and complete all as specified and directed by Engineer-in-Charge Note Old u/s ceiling fan to be deposited at AGE E/M store yard .

Supply & fix wall mounted fan 400 mm sweep, 240 volts osillating type study & heavy duty PVC blades for higher air dilivery nickel chrom plate guard smooth oscillation complete in existing wall etc complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of ceiling fan regulator Modular Type electronic step type 5 step 360 deg 120 Watt 2 Module complete all as specified and directed by Engineer-in-Charge

Supply & fix metal body exhaust fan, AC single phase 230/240V of size 380 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan complete all as specified and directed by Engineer-in-Charge ( Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).

Supply & fix metal body exhaust fan, AC single phase 230/240V of size 300 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan complete all as specified and directed by Engineer-in-Charge ( Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).

Supply & fix in replacement ceiling rose surface bakelite 65mm x 50mm three terminal complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacement, modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement modular switch, 16 Amp flush type 1 module complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement Modular socket 6A 5 pin 2 in 1 combined 2 module, 240 Volts complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement Modular socket 6/16A twin type 2 module, 240 Volts complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement Modular metal flush box 3 module complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement Modular metal flush box 4 module complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement Modular metal flush box 6 module complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement Modular metal flush box 8 module complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement modular white cover plate with frame of module 3 flush ISI marked complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacement modular white cover plate with frame of module 4 flush ISI marked complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacement modular white cover plate with frame of module 6 flush ISI marked complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacement modular white cover plate with frame of module 8 flush ISI marked complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 8 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 single pole and neutral 12 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 single pole and neutral 8 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 single pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engineer-in-Charge.

Supply & fix isolators/MCBs of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) complete all as specified and directed by Engineer-in-Charge (Note :- Make of the isolator should be the same as that of DB) for the following:

MCB TPN 415 volts 63 Amps Capacity, 10 KA

MCB SPN of 240 volts 20/32/40 Amps Capacity, 'C' series, 10 KA

MCB SP of 240 volts 5-40 Amps Capacity, 'C' series, 10 KA

Supply & fix metal encosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 'C' series complete all as specified and directed by Engineer-in-Charge

Taking down and refixing single phase meter as existing complete all as specified and directed by Engr-in-Charge.

Taking down and refixing three phase meter as existing complete all as specified and directed by Engr-in-Charge.

Material & labour for earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel as shown in electrical plate No.3 of SSR Part-I (2009) ccomplete all as specified and directed by Engineer-in-Charge. including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply laying, jointing and testing cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc of size 95 sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply & fix tubes light grade of 50 mm bore galvanised with all fitting for cable protection trenches/ wall/ on pole including necesarry clamps sets and nut & bolts complete all as specified and directed by Engineer-in-Charge.

Material & labour for cutting of existing road for laying GI pipe of size 50 mm including PCC work after laying the cable in GI pipe complete all as specified and directed by Engineer-in-Charge.

Material & labour for outdoor type factory made feeder pillar box made out of CRCA sheet 3.15 mm thick with 4 bus bars of capacity 200 Amps internally prewired suitable for MCCB 100 Amps 4 pole 451 Volt, 25 KA having locking arrangement, provn of suitable hole at bottom for incomming and out going UG cables complete including painting with 2 coat of powder coated paint over a coat of red oxide primer on exterior and interior faces and bus bar insulator, errection of bus bar chamber with suitable qty of PCC 1:2:4 type B2 and supply, fixing and connection of MCCB including earth work and provn of suitable frame at bottom made out of angle iron of size 40x40x6mm thick complete all as specified and directed by Engineer-in-Charge.

Taking out unserviceable LT cables from trenches/ducts etc of any size complete all as specified and directed by Engineer-in-Charge.

Material & labour for earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron strip of size 25x4 by means of nut, bolts, check nuts and washers of galvanised iron or steel as shown in electrical plate No.3 of SSR Part-I (2009) ccomplete all as specified and directed by Engineer-in-Charge. including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and directed by Engineer-in-Charge.

Material & labour for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches well ramming and spreading in layers complete all as specified and directed by Engineer-in-Charge.

Supplying and laying un-reinforced precast concrete cable cover class LV, type - 2, flat, size 300x 180 x 40 mm complete all as specified and directed by Engineer-in-Charge.

Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick complete all as specified and directed by Engineer-in-Charge.

Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed by Engineer-in-Charge.

M/s Bombay Novelty Stores