Supply and erection of additional 2Nos 15HP self priming Coupled Non Clog Horizontal Pump sets and necessary accessories at Low Bridge Drainage Pumping station near APSRTC Bus stand 5th call

Supply and delivery of 11KW/15HP 3PH, 1450 RPM coupled non clog horizontal self priming pump set of makes : Kirloskar / KSB / Crompton pump set of size- 200/200mm head range - 8 to 15 Mtrs with a discharge range - 80 to 20 LPS Model : SP-8 LA etc. solied heanding size 60mm,including base frame including cost and conveyance of all materials etc., complete as directed by the departmental authorities.

Supply of 3 Core 4 Sq.mm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / Polycab / Havells / KEI/Gloster

Supply and delivery of 30"X20" wall mounted Sintex control panel board , complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets of 15HP , Automatic Star and Delta Starter. Makes: Crompton / L&T / Siemens.. Voltmeter ; 0-500 V . 1No 0 to 20 Amps / 0 50 Amps Ammeter -1No, Single phase preventor of suitable range - 1No, TP 63Amps, 10KA MCB. - 1No, suitable capacitors etc.,complete as directed by the departmental authorities.

Labour charges for erection of pump set including CC Bed , given electrical connections and trail run including all required material charges and labour charges etc., complete as directed by the departmenatal authroities.

SUPPLY AND DELIVERY OF BOLTS AND NUTS WITH DOUBLE WASHERS INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES. (1/2" TO 1")

SUPPLY AND DELIVERY OF RUBBER PACKING INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES. 6 mm thick

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. etc., complete as directed by the departmental authorities. (200mm, PN 1.6)

Supply delivery of Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in Vulcanized EPDM rubber & Fusion bonded Electro Static epoxy powder coating inside and outside color Blue RAL 5005 with Min. Coating thickness of 250 microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 excluding all duties, taxes and transportation (200mm, PN 1.6)

Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (200mm Dia x 15mm thick)

Supply and delivery of 200mm dai CI hose coller As per directed by the departmental authorities.

Supply and delivery of 200mm dai (8") PVC foot valve screw type with approved make As per directed by the departmental authorities.

Supply and delivery of 200mm dia (8") canoflex pipe As per directed by the departmental authorities.

Supply and delivery of 200mm dia (8") Hose clamps As per directed by the departmental authorities.

Supply and delivery of 200mm dia (8") dai GI B class long bend with provision of 25mm Nipple and bend for section side filling as per directed by the departmental authorities.

Supply and delivery of 200mm dia (8") dai screw type GI/ MS flanges As per directed by the departmental authorities.

Supply, delivery of MS pipe for suction and delivery line of "ZINDAL" or "TATA" make including cost of specials, coupplings, bends "Tee" etc., including cost and conveyance of all materials labour charges etc., complete as directed by the departmental authorities. (200mm Dia suction and delivery line)