REPAIRS/RESURFACING OF ROADS, FURNITURE AND MISC ITEMS IN DOMESTIC AND TECHNICAL AREA AT AF STATION BHUJ

Amount

M & L for preparing existing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer (using paving bitumen) VG-30 @5 Kg per 10 Sqm complete all as specified and directed.

M & L for providing bituminous premix asphaltic semi dense concrete, 30mm (consolidated thickness) with 5.5% binder content VG 30, by weight of total mix, laid by mechanical paver and hot mix plant, levelled, rolled and compacted to required camber and gradient with 10 to 12 tonne capacity power roller to a uniform gradient and camber smooth surface as specified and as directed by Engineer-in-Charge. Note: The actual requirement of binder shall be as per the job mix design and the tests specified. However quantity of bitumen from the mix design found more than specified 5.5%, the same shall be provided with no extra cost to the Govt. In case binder content found to be less than 5.5% as per mix design as specified in Schedule "A", it shall be adjusted at the rate of Rs.46.90/kg for the less quantity of bitumen used. The quantity of 5.5% mentioned is exclusive of any wastage and no wastage shall be taken into account for the purpose of above adjustment.

M & L for repairs to pot holes any depth n.exc 1 sqm each including sweeping free from dust and mud, or water, scouring sunken surfaces, in roads paths etc cutting around edges to atleast 30mm in depth making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed by EIC.

Providing and applying approx 1.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispensar, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc complete as per direction of Engineer-in-charge and accordance with applicable specifications. Make: Asian / Berger / Nerolac

S & F Cats eyes (glow studs), heavy duty, integral stem reflective PVC with elegant finish of size 100mmX100mmX20mm high fixed by adhesive to the road surface the road studs should have reflective filled on two side of the studs complete all as specified and as directed by Engr-In -Charge Make: Proteck model No 108 RPM / The road safety company / 3M or equivalent make / model as approved by GE

S & F illuminating rod made out of 50mm bore MS pipe, wall thickness 1.6mm, 850mm long, top 600mm length of pipe dellineated to have retro reflective tape of 100mm wide bands alternate in red and white shade. The bottom 250mm long pipe shall be embedded in and including provision of foundation of size 300mm x 300mm x 300mm with cement concrete (1:4:8) type D-2 (using 40mm graded aggregate). MS plate 5mm thick, 60mm dia shall be welded to pipe at top and MS plate 5 mm thick 100mm dia shall be welded to pipe at bottom, including tarring of embedded items and remaining provided with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. Note: The quoted rate is deemed to be inclusive of necessary earthwork, concrete work, excavation, returning & filling in, removing of surplus soil and making good after erecting of the pipe.

M & L for premix bituminous, macadam using paving bitumen VG-30 penetration for minimum (consolidated thickness 75mm or less) with Min 4% binder content by weight of total mix (mix to be obtained from hot mix plant), laid by mechanical paver, levelled & rolled and compacted to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed by EIC. Note: The actual requirement of binder shall be as per the job mix design and the tests specified. However quantity of bitumen from the mix design found more than specified 4%, the same shall be provided with no extra cost to the Govt. In case binder content found to be less than 4% as per mix design as specified in Schedule "A", it shall be adjusted at the rate of Rs.46.90/kg for the less quantity of bitumen used. The quantity of 4% mentioned is exclusive of any wastage and no wastage shall be taken into account for the purpose of above adjustment.

Add/Deduct over item No.7 above for extra/less 4% of binder used complete all as specified and directed by EIC.

Excavating in post holes or similar holes n.exc 0.5 cum getting out, returning filling in and raming earth or broken rubble mixed with earth around, in layers n.exc 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface in hard/dense soil.

M & L for PCC 1:2:4 Type B-2 (40mm graded aggregate) in foundation, filling and mass concrete.

M & L for framed work as in stainless steel tubular work, stainless steel tubes of 16 gauge of grade SS-316 welded to frame work, stainless stell sheet of thickness 2 mm thick SS-316 welded to frame work complete as specified and as directed by Engineer-in-Charge.

M & L for blue colour non reflective sticker of thickness not less than 300 micron self adhesive type sticking on stainless steel plate including cleaning the surface, removing all foreign materials sticking the sticker on the plate including removing any bubble complete all as specified.

M & L for providing and sticking letters in Hindi and English of size 100mm height with 25/30 mm width made out of retro reflective stickers sticking the same on any standard steel plate all as all as directed and specified by Engr-in-Charge.

M & L for providing and sticking Air Force logo in sigma of size 150mm dia retro reflective sticker incluing fixing on any standard stainless steel section complete all as specified and as directed.

M & L for providing and fixing arrows of size 160mmX100mm made out of retro reflective sticker white in colour and fixing to any standard plate complete all as specified.

M & L for providing and fixing circular shaped signal logo of dia 500mm logo of "HEAVY VEHICLES" and speed limit as "40 KMPH" on top half portion and logo of "LIGHT VEHICLE" and "MOTOR CYCLE" on bottom half portion with speed limit as "30 KMPH" respectively in retro reflective stickers of size 4”X1” complete all as specified and directed by EIC.

S & F retro reflective sticker tapes of width 25mm of colour red/ yellow/ white as per design and pattern as directed by the Engr-in-Charge complete.

M/S S. SINGH TRADERS

Mepani Construction Company

M/s Bombay Novelty Stores

M/s. Shree Shakti Enterprise