Loading
Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.7 L
Closing Date
11 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELE TENDER
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per given Annexure-VIB in the tender document, along with copies of Audited Balance sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer should have valid minimum 'B' Grade Electrical Contractor's License issued by State Electrical Licensing Board. The license should have been issued on date prior to the date of Tender opening
The tenderer must have successfully completed or substantially completed any one of the following categories of works during last 07 (seven) years, ending last day of month previous to the one in which the tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, (or) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, (or) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar Nature of Work: "Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items/equipments) for 230 volts, 1 phase or 415V 3phase system or higher voltages (Authority: As per CEE/HQ/SC's.lr.No.E.29/P/Similar nature of works dtd.30.12.2014 S.No.3).
15 conditions · 12 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Annexure V (for all firms): Format for certificate to be submitted/uploaded by tenderer along with the tender documents. On IREPS module, a facility has already been created for online submission of Annexure-V. Therefore, the provision of downloading of Annexure-V of GCC & uploading of physically signed Annexure-V by the tenderer has been discontinued on IREPS. Hence bidders are advised to mandatorily submit Annexure-V. Annexure V(A) for Partnership firm/JV/HUF/LLP. Non submission of certificate by the bidder shall result in summary rejection of his/their bid.
Declaration OF Bid form First sheet is to be submitted by the bidder is enclosed as Annexure-I. Non submission of certificate by the bidder shall result in summary rejection of his/their bid.
(i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
undertaking regarding Employment/Partnership etc. of Retired Railway Employees as Annexure-III in terms of GCC Part-I, Clause 16.
The tenderer whether sole proprietor / a company or a partnership firm / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected.
Tenders without accompanying valid EMD / BG in the format of Annexure -VIA shall be summarily rejected
ESI & PF Code Numbers Registrations Copies
NEFT Mandate form
GST Registration Certificates
Tenderers without Annual Contractual Turnover Data for the previous 3/4 Years in the format of Annexure -VIB shall be summarily rejected.
Submission of bid without Experience Certificate in the format of Annexure -XII shall be summarily rejected.
Submission of bid without valid PAN Card in the name of tendering agency shall be summarily rejected.
Documents to be submitted along with tender are as per clause 1.19 of Part A of tender document (Clause no.14, 15, & 18 of GCC-April-2022)
The tenderer in their bid shall indicate the details of their jurisdictional assessing officers (Designation, address & email id). In case of award of contract, a copy of the LOA shall be immediately forwarded by executive to the jurisdictional assessing officer mentioned in the tenderer's bid.
Improvements to electrical assets, Provision of 2No. 20KWp Solar energy plants for shunya, shunya+ service buildings, online monitoring system for 350Nos. smart energy meters and conversion of OH lines to UG cables at WWS/GTPL.
GR-E-29-1-214
GR-E-29-1-214
Open
Works - General
12 Months
Krishna, Andhra Pradesh
₹0
₹2.7 L
11 May 2026
13 Apr 2026
27 Apr 2026
49 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,36,52,303.6 | ||
| — | 2.00 | — | — | ||
| Design, Supply, erection, fixing and commissioning of 20KWp roof top/ land based on- grid solar plant with, MPPT technology with SPV array, Mono PERC crystalline Solar Module, Module Mounting Structure, Power Conditioning Unit (PCU) consisting of Maximum Power Point Tracker (MPPT), Inverter (20KW output pure sine wave inverter), and Controls and Protections, interconnect cables, switches, reinforced concrete pillars, steel structures all complete as per the latest standard specifications. | — | — | — | 20,26,080 | |
| — | 330.00 | — | — | ||
| Supply of single phase Dual mode (Prepaid & post paid) smart energy meter incl. with NB IOT SIM communication interface, software and shall be covered with 3 years recharge for SIM. | — | — | — | 36,01,950 | |
| — | 20.00 | — | — | ||
| Supply of three phase Dual mode (Prepaid & post paid) smart energy meter with NB IOT SIM communication interface, software and shall be covered with 3 years recharge for SIM. | — | — | — | 3,29,980 | |
| — | 185.00 | — | — | ||
| Supply & Fixing of metal enclosure of size 400mmX400mm to accommodate two smart energy meters incl. Internal wiring, fixing and connecting of meters. | — | — | — | 7,59,240 | |
| — | 800.00 | — | — | ||
| Supply of BLDC ceiling Fan 1200 mm sweep, 3 Blades with remote control suitable for 230Volts 50HZ AC supply including all connecting accessories as per enclosed specification. | — | — | — | 24,37,848 | |
| — | 800.00 | — | — | ||
| Fixing of BLDC ceiling fans with 1 mtr long 1/2 inch GI down rod arrangement. | — | — | — | 51,720 | |
| — | 20.00 | — | — | ||
| Supply installation, testing and commissioning of 360 degree ceiling mounted Occupancy sensors for air conditioners incl. DB, 4P 20A MCB and all accessories as per enclosed specification. | — | — | — | 1,41,060 | |
| — | 100.00 | — | — | ||
| Supply of 40A DP RCCB 30mA S-type for 230volts AC applications with integrated label holder, Ergonomic Grey color dolly, Bi connect lower terminals and shall be confirming to IS:12640-1 | — | — | — | 4,36,400 | |
| — | 30.00 | — | — | ||
| Supply of 63A FP RCCB 100mA S-type for 230volts AC applications with integrated label holder, Ergonomic Grey color dolly, Bi connect lower terminals and shall be confirming to IS:12640-1 | — | — | — | 1,93,980 | |
| — | 30.00 | — | — | ||
| Supply of DB enclosure with door for Fixing of 63A FP RCCB suitable for flush/surface mounting, copper busbar, earth bar & neutral bar and shall be confirming to IEC 61439-3. | — | — | — | 54,960 | |
| — | 600.00 | — | — | ||
| Supply of 3 core 185sqmm HT XLPE insulated, stranded, PVC outer sheathed armored with Galvanized round steel wire or steel strip and with aluminium conductor suitable for 11000Volts grade and shall be confirming to IS: 7098 Part-II or latest. | — | — | — | 18,90,600 | |
| — | 600.00 | — | — | ||
| Laying, testing and connecting of XLPE HTUG cable of size 3 core 185sqmm as per specification enclosed | — | — | — | 42,810 | |
| — | 800.00 | — | — | ||
| Supply of 4 core 120 sq.mm size of LTUG cable, XLPE insulated, stranded, PVC outer sheathed armored with galvanized round steel wire or steel strip and with aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988 with all amendments or latest as per specification enclosed. | — | — | — | 5,33,008 | |
| — | 800.00 | — | — | ||
| Laying, testing and connecting of XLPE LTUG cable of 4 core 120 sq.mm size as per specification enclosed. | — | — | — | 16,128 | |
| — | 600.00 | — | — | ||
| Supply of 4 core 50 sq.mm size of LTUG cable, XLPE insulated, stranded, PVC outer sheathed armored with galvanized round steel wire or steel strip and with aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988 with all amendments or latest as per specification enclosed. | — | — | — | 1,94,556 | |
| — | 600.00 | — | — | ||
| Laying, testing and connecting of XLPE LTUG cable of 4 core 50 sq.mm size as per specification enclosed | — | — | — | 10,584 | |
| — | 1000.00 | — | — | ||
| Excavation of cable trench in normal soil as per specification. | — | — | — | 84,440 | |
| — | 600.00 | — | — | ||
| Excavation of cable trench in Concrete breaking/ track crossings as per specification. | — | — | — | 2,41,458 | |
| — | 1400.00 | — | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with UG cable for earth continuity | — | — | — | 22,862 | |
| — | 600.00 | — | — | ||
| Supply of 110mm OD HDPE pipes (working pressure PE-63) of suitable nominal pressure at PN2.5 Kgf/sq.mm of sizes ISI marked along with 'T' joints, bends, elbows as per IS:4984/2016 or latest including all other connected accessories etc. complete with fitting and cutting, jointing etc as required. | — | — | — | 1,91,646 | |
| — | 1000.00 | — | — | ||
| Supply of 75mm OD HDPE pipes (working pressure PE-63) of suitable nominal pressure at PN2.5 Kgf/sq.mm of sizes ISI marked along with 'T' joints, bends, elbows as per IS:4984/2016 or latest including all other connected accessories etc. complete with fitting and cutting, jointing etc. as required. | — | — | — | 1,50,060 | |
| — | 6.00 | — | — | ||
| Supply & fixing of HT outdoor heat shrink cable joint kits 95-185sqmm as per specification enclosed. | — | — | — | 54,000 | |
| — | 4.00 | — | — | ||
| Supply & fixing of HT outdoor heat shrink cable termination kits 95-185sqmm as per specification enclosed. | — | — | — | 64,864.8 | |
| — | 4.00 | — | — | ||
| Supply of Cable junction boxes of size 300x450x170mm with suitable busbar for 120/ 185 sq mm 4 Core armored XLPE cable as per specification enclosed. | — | — | — | 1,22,068.8 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tenderdocument214.pdf
ATTACHMENT
GCCApril2022AdvanceCorrectionSlipNo_11.pdf IRACS11toGCC
ATTACHMENT
IRACS1-10toGCC.pdf
ATTACHMENT
GCC April 2022
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
GCCApril2022AdvanceCorrectionSlipNo_11.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .