REPAIR TO FENCING COMPOUND WALL HARDSTANDING FOOTHPATH AND REPAIRS CLEANING OF SEWAGE LINE SEPTIC TANK SOAK WELL AND OTHER MISC WORKS AT MIL STN GANDHIDHAM UNDER GE ARMY BHUJ

Amount

Dismantling of fencing wire mesh any type complete all as specified & directed .

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) and disposing off rubbish off the premises of cantonment complete all as specified and directed.

M & L for cement concrete type D2 1:4:8 (using 40mm graded aggregates) in foundation filling and mass concrete complete all as specified and directed.

M & L for Mild steel angle, flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. conforming to Fe-290-Gde E-165 complete all as specified & directed.

Supply only of Mild Steel in flat, Round or Square bars, in available length for fixing of chain link fencing having quality Fe 410-W (Gde-E-250) Quality-A complete all as specified & directed.

S & F of 5 to 10 mm dia MS screw bolts (machine made) with hexagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square nut length of bolt & n.exc 5 cm long complete all as specified & as directed.

Supply only, PVC Coated chain link fencing having wire outer dia 5mm and wire mesh size of 75mm x 75mm complete all as specicfied and directed.

Fixing of chain link fencing incl line wires any mesh size & type to any type of standards rails, straining bolts etc including provision of line wire complete all as specified & directed.

M & L for preparation of steel surfaces of any description over 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified & directed.

M & L for preparation of steel surfaces of any description n exc 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified & directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & as directed.

M & L for glazed finish chequred cement concrete coloured tiles of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry (with gray cement and pigment) and including 20 mm thick in cement plaster in CM (1:6) for fixing tiles complete all as specicfied and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M & L for 25 mm thick cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) as in padding to receive chequred tiling and all other similar works complete all as specified and directed.

M & L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M & L for Preparation of new or previously untreated surfaces of concrete and concrete based materials of any description and in any position over 10 cm width or girth and Material and labour for applying two coat of synthetic enamel paint on concrete surfaces over priming paint plaster coats complete all as specified and directed.

M & L for 40mm thick PCC 1:2:4 type B-0 (12.5 mm graded stone aggregate) as in floors and all other similar works complete all as specified and directed.

M & L for 100 mm thick PCC 1:3:6 type C-2 (40 mm graded stone aggregate) as in sub base and all other similar works complete all as specified and directed.

M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all specified and directed.

M & L for Forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

Demolition of Brickwork or stone / boulder masonry / precast concrete block walling and similar items i.e. ashlar facing dressing stone work, precast concrete articles etc of any description and in any position built in cement mortar including all quoins, arches and pillars etc and disposing off rubbish) off the premises of cantonment complete all as specified and directed.

M & L for Precast cement concrete block masonry with solid blocks Type C1 1:3:6 (using 20mm graded aggregate), exc. 10cm in width and setting in Cement mortar 1:6 complete all as specified & as directed.

M & L for PCC Type B0 1:2:4 Nominal Mix (12.5mm graded aggregates in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified & as directed.

Taking down cement plaster of any description from brick wall or concrete surfaces including racking out joints and hacking for key, scrubbing down with water etc complete all as specified & as directed.

M & L for 15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified & as directed.

M & L for preparation of newly plastered wall surfaces and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & as directed.

M & L for Preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down, smoke soot moulds, moss and efflorescent salts treating oil and greasy spots and Material and labour for applying one coat of cement base paint including watering and curing of surface adequately before and after application of cement base paint complete all as specified and directed.

Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

S & F of 1.00 mm thick MS plain, black sheet in wall cladding , steel gates and all other similar work complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for Providing precast cement concrete Type C1 1:3:6 (using 20mm graded aggregate) and set in CM 1:6 in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed.

M & L for mild steel TMT bars, 10mm dia and over,as in reinforcement, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

Ditto as per above item No 37 but 5mm dia and over upto and including 10 mm dia in stirrups, spaces and binders.

S & F of Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) having quality of Fe 410-W (Gde - E - 250) quality - A complete all as specified & as directed.

S & F in repairs of 50mm dia GI pipes Heavy Class complete all as specified and directed.

S & F of 12 mm dia MS screw bolts (machine made) with hexagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square nut length of bolt Exc 5cm and N. exc 10 cm long complete all as specified & as directed.

S & F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M & L for Providing precast cement concrete Type B0 1:3:6 (12.5 mm graded aggregate) and set in CM 1:6 louvres and jallies, 35mm thick (measured solid), including all mouldings all as specified and directed.

Taking out liquid sludge including floating sludge contents from septic tank of any description and in any position and cleaning septic tank up to bottom including walls to any depth from ground level by pumping through sewage disposal pump / honey sucker pump (as directed by the Engr-in-charge and as on requirement basis) and removing the liquid sludge outside of the MD land or nearer man hole of civil sewage line in such a manner that there shall be no nuisance and no unhygienic environment complete all as specified and directed. (Note: Pump, honey sucker pump and sludge removal van / vehicles shall be arranged by contractor at his own cost and nothing extra shall be governed by the Deptt.)

Dewatering complete filter bed of any description, in any position by pumping through sewage disposal pump / honey sucker pump (as directed by the Engr-in-charge and as on requirement basis) up to the bottom / bed outlet of dewatering at least 50 mtr away as and when required and removing in such a manner that there shall be no nuisance and no unhygienic environment complete all as specified and directed. The following user capacity.

(a) Upto 20 User

(b) 21 to 50 User

Taking out sedimented sludge left out after taking out and removing liquid sludge / effluent from septic tank of any description, in any position and of any depth and removing the sludge depositions as directed, cleaning septic tank up to bottom, including walls and removing and disposal of the sedimented / solid sludge outside the cantonment being contractor's property as per Sch of credit and removing in such a manner that there shall be no nuisance and no unhygienic environment complete all as specified and directed. (Note: Pump, honey sucker pump and sludge removal van / vehicles shall be arranged by contractor at his own cost and nothing extra shall be governed by the Deptt.)

Cleaning of existing chocked / blocked sewage lines of any description and in any position by taking out loose sediment sand, girt, ash, sludge water, rags, fibre or vegetation from the sewage line of 150 mm bore buried in ground to any depth from GL including removal of sludge / debris outside the cantonment area in such a manner that there shall be no nuisance and no unhygienic environment at the place of disposal also complete all as specified and directed. (Note: Pump, honey sucker pump and sludge removal van / vehicles shall be arranged by contractor at his own cost and nothing extra shall be governed by the Deptt.)

Cleaning of existing chocked / blocked sewage lines of any description and in any position by taking out loose sediment sand, girt, ash, sludge water, rags, fibre or vegetation from the sewage line of 200 mm bore buried in ground to any depth from GL including removal of sludge / debris outside the cantonment area in such a manner that there shall be no nuisance and no unhygienic environment at the place of disposal also complete all as specified and directed. (Note: Pump, honey sucker pump and sludge removal van / vehicles shall be arranged by contractor at his own cost and nothing extra shall be governed by the Deptt.)

Opening and cleaning of blockage of kitchen / bath traps or WC any pattern and in any position by rodding, manually or mechanically (as directed by Engr-in-charge and as on requirement basis) upto 1st manholes complete all as specified and directed.

Cleaning of blocked man hole of any description and in any position depth not exc 1.5 m deep mechanically or manually by taking off sludge waste / night soil and silted soil from the existing manhole of any size collecting and removal of sludge in sealed container out of the cantonment area in such a manner that there shall be no nuisance and no unhygienic environment at the place of disposal also complete all as specified and directed.

Cleaning of blocked man hole of any description and in any position depth exc 1.5 m but not exc 3 m deep mechanically or manually by taking off sludge waste / night soil and silted soil from the existing manhole of any size collecting and removal of sludge in sealed container out of the cantonment area in such a manner that there shall be no nuisance and no unhygienic environment at the place of disposal also complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) and disposing off rubbish off the premises of cantonment complete all as specified and directed.

M & L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregates) as in coping and finishing the exposed surfaces even and smooth by using extra cement including necessary form work complete all as specified and directed.

M & L for PCC 1:2:4 type B2 (using 40mm graded aggregate) as in benching of surface channels/manholes including fair finishes of surfaces chamfering, throating and weathering and necessary form work complete as specified and directed.

M & L for rendering 15 mm thick in CM 1:4 on concrete / fair surfaces of block masonary and including mixing water proofing compound as per manufactureres instructions complete all as specified and directed. Note :- Water proofing compound shall be measured and paid for seperately under appropriate item of Sch "A' as supply only

Supply only liquid water proofing compound complete all as specified and directed.

Excavation in trenches not exc. 1.5 m wide and not exc 1.5 m in depth for foundation, for laying / taking down sewage / water supply lines, forming bottom surfaces to required slope & gradient and not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/loose type of soil complete all as specified and directed.

Excavation in trenches not exc. 1.5 m wide and depth exc 1.5 m deep but not exc 3 mtr deep for foundation, for laying / taking down sewage / water supply lines, forming bottom surfaces to required slope & gradient and not exc 10 sqm on plan and getting out in soft/loose type of soil complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed stone ware, AC or reinforced concrete) 150 mm dia pipe of any description and in any position set and jointed in cement mortar and Supplying, fixing, jointing and testing reinforced concrete drain pipes 150 mm bore, class NP-2, laid and jointed with collar in CM 1:1 complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed stone ware, AC or reinforced concrete) 200 mm dia pipe of any description and in any position set and jointed in cement mortar and Supplying, fixing, jointing and testing reinforced concrete drain pipes 200 mm bore, class NP-2, laid and jointed with collar in CM 1:1 complete all as specified and directed.

M & L for concrete bed to drain pipes in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) including packing under and haunching against the side of the pipes after they are laid tested for pipes of 150 mm dia complete all as specified and directed.

M & L for concrete bed to drain pipes in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) including packing under and haunching against the side of the pipes after they are laid tested for pipes of 200 mm dia complete all as specified and directed.

Demolition of Reinforced Concrete of any description and in any position not otherwise specifically provided and M & L for pre-cast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces in RCC 1:2:4 Type B-1 (using 20 mm graded stone aggregates) and placing in position and set in CM 1:4 complete all as specified and directed.

Demolition and breaking up drain pipes upto 100/110 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up drain pipes upto 75 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed.

Supply and fixing of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with suitable clamp complete all as specified and as directed.

Supply and fixing of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with suitable clamp complete all as specified and as directed.

Supply and fixing of PVC (SWR) junction single, (single T) equal or unequal provided with access door suitable for 110mm bore PVC pipes complete all as specified and as directed.

Supply and fixing of PVC (SWR) bends any radius suitable for 110mm bore PVC pipes with access door complete all as specified and as directed.

Supply and fixing of PVC (SWR) bends any radius suitable for 75mm bore PVC pipes with access door complete all as specified and as directed.

Supply and fixing of PVC (SWR) vent cowl for 110mm bore PVC pipes complete all as specified and as directed.

Supply and fixing of PVC (SWR) WC connector bent type for 110mm bore PVC pipes complete all as specified and as directed.

Supply and fixing of PVC (SWR) for 75mm Diameter of outlet floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed.

Supply and fixing of PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.

M & L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC 1:2:4 type B-2 (using 40 mm graded stone aggregates ) smooth finished, and reforming benching as required for 150mm dia of pipe complete all as specified and directed.

M & L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC 1:2:4 type B-2 (using 40 mm graded stone aggregates ) smooth finished, and reforming benching as required for 200mm dia of pipe complete all as specified and directed.

Returning, filling in the any type of soil including spreading, levelling. Watering and well ramming in layers not exceeding 25 cm thick each layer complete all as specified and directed.

Removing the excavated soil to a distance not exceeding 50 metres away depositing where directed at a level not exceeding 1.50 metres above the starting point complete all as specified and directed.

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

Abhishek Enterprises (BID ID -3306135)

M/s Bombay Novelty Stores (BID ID -3306785)

Shree Builders (BID ID -3308998)

ALBA AC AND REF SERVICES (BID ID -3309343)

sudarshan builders (BID ID -3308947)

Ramdev and Sons (BID ID -3308828)

SHUBHAM INTERNATIONAL (BID ID -3307003)