Construction of Girls Toilet at Primary School Sundal Pati Hariganiwan

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and Laying of Stone Soling hand packed including ramming, dressing and watering etc. with all cost and carriage of materials upto site of work complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Providing and fixing prefabricated structure excluding cost of beams, columns etc structural steel having following specification wall panells 60mm thick with 0.63mmhard diped galvanised steel sheets on both sides with 60mm thick layers of ridged CFC Free close cell polyurethene fom.ceiling panells 40mm thick made 0.63mm thick hard dipped galvanised steel sheets on both sides with 40mm thick layers of ridged CFC free close cell polyurethene fom including carraige and head load complete as per the directions of Incharge Engineer.

Providing and fixing of glazing fro aluminium doors, windows and ventelator glass panes of 5mm thick indluding cost of gaskets, beadings and other necessary fittings/fixtures and carriage of materials/ headload upto site of work complete as per the direction of Incharge Engineer.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position angles/ flats/ tubles including fixing of 2mm MS sheet in Door shutters including framework and applying a priming coat of approved steel primer and paint all complete.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses but including cost of Hips, ridges and valleys and cutting to size and shape wherever required inclusive of all carriages/ headload upto site of work complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.