REPAIRS TO STORM WATER DRAIN COVERS, CATTLE TRAPS, STEEL GATES AND OTHER MISC WORKS AT AF STN SURYALANKA

Amount

Demolition of plain cement concrete (un-reinforced) in ground floors, pavings and in foundations not exceeding 15cm thickness (below or above ground level) including removal of demolished material to out side MD land complete all as specified and as directed.

Demolition of reinforced cement concrete as in columns/ pillars and footing etc. of any description and in any position including reinforcement cut as required to facilitate demolition complete all as specified and as directed.

Demolition of Brick work built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m deep for foundations etc, or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10sqm on plan and n.exc 1.50m in depth and getting out in soft/loose soil complete all as specified and as directed.

Taking down cement or cement lime plaster any description on brick walls, including racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed

Dismantling of Structural Steel work, mild steel etc. in doors, gates, cattle traps etc. complete all as specified and as directed

M&L for cement concrete 1:4:8 type D-2 ( using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed

M&L for Brickwork with sub-class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in coping and like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and as directed.

M&L for precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregates as in cover slabs set in CM 1:6 including all necessary form work, exposed surfaces of concrete shall be finished even and smooth with out using extra cement complete all as specified and as directed

M&L for Mild steel deformed TMT bars 8 mm dia as in reinforcement to concrete cut to length, bent to shape required incl cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia wire complete all as specified and as directed

S&F Fe-290 Gde E-165 Rolled mild steel joist, channel, angle or Tee sections fixed independently without connecting plates etc. as in cattle traps complete all as specified and as directed

S&F Fe-290 Gde E-165 Rolled mild steel sections as in framed work for cattle traps, doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilling for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings & hanging also fastening & fixing complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer complete all as specified and as directed

S&F 1.60mm thick Mild Steel black sheet as in wall cladding, steel gates and similar work, cut to size, holes punched,; including round headed screws, clout nails or rivets and fixed to steel framing with plain 40 mm lap joints with riveted or welded seams,etc including bending or, turning up, mitred angles etc. complete all as specified and as directed

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof covering etc. complete all as specified and as directed

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed

Supply only hard wood sawdust powder own colour of 50kg bags packing of superior quality and suitable for small firing range complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed

Removing excavated materials not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash, including preparation of surfaces complete all as specified and as directed

Ruchira Associates

G V N R CONSTRUCTIONS

DHANA CONSTRUCTIONS

SM CONSTRUCTIONS

K VENUGOPALA SWAMY