REPAIR AND MAINT OF EXISTING ROAD AND REPLACEMENT OF OLD DAMAGED ROAD FURNITURE ITEMS ETC AT MH BHUJ AND OTHER MINOR UNITS UNDER AGE B/R II AT MIL STN BHUJ

Amount

M & L preparing existing black top surfaces by brushing with wire brushes for removing cacked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc applying evenly a priming/ tack coat with paving bituminous primer (VG-10) Grade at 5 Kg per 10 Sqm

M & L for bituminous premix semi dense asphaltic concrete, 30 mm consolidated/ compacted thickness using Hot Mix plant and machenical paver with 5.5% (paving bitumen VG 30 Grade) binder content by weight of total mix, rolled and compacted using 8-10 tone power road roller to require camber and gradient complete all as specified and as directed by Engr-in-charge.

M & L for preparing bituminous surfaces of road and making 2.5 mm thick centre lines, stop lines, dashes, arrows etc and the like n.exec 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S & F in repairs D52 raised pavement marker (Cat Eye Road Stud) complying ASTM D-4380 type H specifications, made of high strength engineering plastic body having at least 13635 Kgs load bearing capacity in accordance with ASTM D 4280. The reflective raised pavement markers shall also confrem to the MORTH circular No RW/NH. 33023/10/97-DO.III & size or marker 9 cms x 10 cms x 1.6 cm having shape so that no water penetration or dust accumulation takes place on reflective surface, fitted with electronically weded tough polycarbonate micro prismatic reflective panels having not less than 13 sqcms surface of each side having long distance visibility at night and in wet weather condition. The slope or retro-reflectory surface shall be 35 + 5 degree to base. Each reflector shall have a cill not less than value specified in table 1 of MORTH circular dated 11.06.97 respectively. The body of the marker having finger grip for easy adn accurate placement and application with adhesive on Asphalt or Cement road all as specified and directed.

S & F of Dual Directional Speed breaker made of heavy duty plastic material of 50 mm height all as specified and directed.

machine vision plus

mahavir industries