Balance work of Narayani Talab Opreation maintenance

Amount

Design and Supply FRP Flotation Platform 4ft Dia Description:- Make Round & Square type FRP Flotation System, from an ISO 9001:2008 certified company/Firm , in the form of two flotation compartment made of Fiber glass reinforced plastic (FRP). Floats Immune To Rust Corrosion Or Not. Each FRP float consists of a shell of FRP lamination between 3-4mm thick. This shell shall be completely sealed to prevent ingress of water. To provide for any eventually whereby the shell is holed, it shall be completely filled with closed cell foam which shall prevent the ingress of water. The foam shall be polystyrene and should fill the whole of the shell. 8 Layer Resin Coating with wax filler Under frame of steel protected by FRP. Fittings in plated steel. a.Supply of 5HP Open well Submersible Pump100mm DIA SUITABLE FOR WORKING IN 415V AC 50HZ SUPPLY. Make : Kirloskar/Crompton or equivalent make b.Supplying , Installation ,Testing , Supervision and fixing of Plumbing materials. Make: - Jindal/ Tata equivalent make c.Supplying , Installation ,Testing , Supervision and fixing of Vertical Hollow Jet Nozzle Water height of 20-30 ft. Nozzle Specification: Bronze/Gunmetal/Brass. 1No. d.Supplying , Installation ,Testing , Supervision and fixing of Stream Jet Nozzle Water height of 10-20 ft. Nozzle Specification: Bronze/Gunmetal/Brass. 1 set of 25 jet nozzels. e.Supplying , Installation ,Testing , Supervision and fixing of 2ft DIA ring.Make : Jindal/ Tata1No. f.Supplying , Installation ,Testing , Supervision and fixing of Under Water LED Lights. 18wtts.Light Specification: Stainless Steel. 304 1 set of 10 Nos. g.Supplying , Installation ,Testing , Supervision and fixing of Under Water LED Lights. 36wtts. Light Specification: Stainless Steel. 304 Make : Pinnacle water technologies (PWT) 1 set of 5 Nos. h.Supplying , Installation ,Testing , Supervision and fixing of RGB Colored LED Lights Controller.1 set of 02 Nos. i.Supplying , Installation ,Testing , Supervision and Laying submersible flat/round cables PVC insulated PVC sheathed copper conductor of Make: Polycab/ National/Kalinga/Deep complete as per the direction & entire satisfaction of Engineer in charge. Three core flat type 2.5 Square mm. k.Supplying , Installation ,Testing , Supervision and Laying submersible flat/round cables PVC insulated PVC sheathed copper conductor of Make: Polycab/ National/Kalinga/Deep complete as per the direction & entire satisfaction of Engineer in charge. Four core round type 1 Square mm. Supplying , Installation ,Testing , Supervision and fixing of Electrical Panel:- Electrical panel with MCB’s, Ammeter, Voltmeter, Single phase preventer, indicating lights in 16 gauge Double doorpowder coated weather proof body Panel. Circuit type star delta. (All accessories are of reputed make such as L&T & Schneider) Rating – IP 54.

Vinyl cut & paste over flex backlit glow sign board guaranteed for 5 years life.

Supply & installation of fibre glass slides 6 feet high & 10 feet long

Supply & installation of swings for two children height 7 feet

Supply & installation of see saw conv. Type for 4 children 6.5 feet long

Mildsteel double sky walker gym equipment for two

Chest press double garden gym equipment for two

Outdoor cycle

Outdoor double Abs shaper

Outdoor doublemini ski

LT Feeder Pillars (For Shiv Statue Area): Supplying, fixing, testing & commissioning of outdoor wall / floor mounted cubicle type feeder pillar suitable for 415V 3 phase, 50 Hz, 4 wire system complete with all accessories and miscellaneous equipment as per specification. The feeder pillar shall be fabricated out of 2/ 2.5 mm hot dip galvanized GI sheet steel, powder coated paint & provided with required gasket for dust / vermin proof with degree of protection IP55 of suitable size double door & locking arrangement with provision of following: Incomer MCCB, 4 pole, 50 - 63Amp. -1 no. 415V, 50 Hz TPN Busbar - 1 set. 16-32 A TPN MCB for three phase consumers-4 nos. Digital Energy Meter – 1no. Power Contractor with timer based Auto On/ Off Switch – 1 set. RBY Phase indication LED lamps – 3 nos. Holder with switch & 9watt LED lamp for panel illumination Earthing terminal – 2 nos. Wiring & insulation sheet Cable glands suitable for 3.5Cx 50 mm²/16 mm² PVC armoured cable Concrete foundation (for plinth mounting) Rating plate/ Name plate Danger Board Sundries (Feeder Pillar Shall have space provision for mounting facade lighting controllers)

Facade Lighting - Shiv Statue: P & F of 40 W Integral Surface Mounted Device (SMD), IP 66, LED Bush light with System Lumen Output Minimum 1203 Lumen. LED Linear Wall washer shall be made up of Die Cast Aluminum Housing and Frame, for better heat decapitation. Fixtures should have toughended glass with 30° Beam. The luminaire shall have IP66 protection. There shall be LEDs from reputed makes such as Nichia, Japan / Cree USA / Bridgelux, USA / Lumiled USA/ Osram Duris should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided.The LED shall be compliant with Useful L70 life of >35000 Hrs. The LEDs used should be with RGB CCT .LED Driver shall be Isolated type, Constant Current topology driver in metal enclosure with IP 67 Protection. Driver efficiency should be 86% & proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 3 KV internal surge protection. LED driver shall have output short circuit & over voltage protection inbuilt. Luminare shall have 3 channel main 360 W DMX controller to programme the RGB Flood light to provide different colors as per requiremnt. Similar to Wipro LF04-501-030-CC-XX or equivalent make & model.

P & F of IP67, 200W, 24V Led Driver for Arcus Range fittings with Industrail Plastic Material. Similar to Wipro XLG-200-24/48 or equivalent make & model

P & F of IP67 Plug-socket connector(one pair) S Connector for 4Cx0.75mm2, model C-S-4C-IP67

P & F of IP67 Plug-socket connector(one pair) T Connector for 4Cx0.75mm2 model C-T-4C-IP67

P & F of 3 channel 24 DC Input, output 30W DMX Controller for RGB Color chaning fixture. It should have capability to control with remotes upto 5 m radius. It should Have capability of Syncronious Color conversion program upto 15 different varients of colors.It Can control conversion of speed and brightness of color thorugh remote controls.It should be complient of connection of 4C Cable (V+RGB) or 5C Cable (V+V-RGB). Sstem can be expanded signal of input and output through RJ45 cable. It should have controller with individual IP adresses. Similar to Wipro LG70-360-3M-24 or equivalent make & model.

P & F of 3 channel 24 DC Input, output 30W DMX Controller for RGB Color chaning fixture. It should have capability to control with remotes upto 5 m radius. It should Have capability of Syncronious Color conversion program upto 15 different varients of colors.It Can control conversion of speed and brightness of color thorugh remote controls.It should be complient of connection of 4C Cable (V+RGB) or 5C Cable (V+V-RGB). Sstem can be expanded signal of input and output through RJ45 cable. It should have controller with individual IP adresses. Similar to Wipro LG70-360-3E-24 or equivalent make & model.

Solar Power Tree: Design, Supply, Installation, Testing & Commissioning of 3x5kWp On-Grid Solar Tree Power Plant comprising of the following system components and accessories with 5 years comprehensive maintenance: - Solar PV Module array system comprising of (minimum capacity 330 Wp and above wattage) Mono crystalline silicon modules of required quantity for 5 kWp plant. PV modules used should be made in India. Each PV module must have RF identification Tag (RFID) compatible with MNRE requirement.(Traceability requirement). - Pure sine wave inverter of required rating with MPPT (Maximum Power Point Tracking) technology (AC power conditionings units) with full-proof protection against Grid Islanding and other protection. - Array junction box (weather proof- IP65) of appropriate standard along with required protection and isolation system, surge protection, DC rated MCB complete etc. as required along with PVC hard conduits or cable tray with cover. - Data Acquisition system with Data logging provision for plant control & monitoring, time and date stamped system data logs for analysis with high quality, Metering and instrumentation for display of system parameters and status indication. - Required LT cabling for DC and AC power supply including safety equipment - Hot dip galvanized mounting structures (minimum of 120 microns) for mounting the modules/ panels/ arrays to withstand the speed for the wind zone of the location where PV system is installed and with necessary protection towards rusting either by coating or anodization. Water piping (along with pump) with foggers for easy cleaning/ wiping dust. Appropriate PCC foundation for holding Solar Tree Structure/ PV module. - Lightning arrestors for lightning protection and suitable earthing such that induced transients find a route to earth. - Earthing of PV array, DC equipment, Inverter, AC equipment and distribution wiring as per IS-3043/ IEC. - Portable fire extinguishers and sand bucket as required. - AC static direct connected watt hour Smart Meter Class 1 & 2 specifications confirming to IS-16444 or as specified by DISCOMs for Import & Export/ Net Energy Measurement. - Any other work or material required for successful commissioning of the system as per technical specifications detailed in Tender Document/NIT - Electrical wiring work has to be done by workers having valid wire man’s license.

SITC Aluminium Metal Philips or equivalent make 24 W My Garden Aluminum Wall Light, IP Rating: IP44(Gazebo)

Power Connection Charges: SITC of electric line & metering equipments including application fee, security deposit, consumption demand charges & other charges etc for sanction/ release of electrical connection from concerned power supply company/ DISCOM (Job to be carried out by DISCOM under DEPOSIT work)

Bidder Name

Amount

TULSI NARAYAN GARG (GSTN-23AFQPG6797P1ZG) BID ID -1136493

stepup building solutions pvt ltd (GSTN-NA) BID ID -1133206

Description of Work / Item(s)

1 year annuity

2 year annuity

3 year annuity

4 year annuity

5 year annuity

TULSI NARAYAN GARG (BID ID -1136493)

TULSI NARAYAN GARG (BID ID -1136493)

stepup building solutions pvt ltd (BID ID -1133206)