Providing 3Nos existing old poles with LED Lighting at Christian Burial Grounds Opp Punnami Hotel Division No.39 and Crombay Road Division No.41 in Circle 1 area

Foundation and erection charges with special T&P, for 9.00Mtrs / 10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete

Fabrication, transportation and supply of Mini Ring arm (0.90m to 1.00m dia.) complete with all accessories with MS galvanized suitable dia pipe for ring arrangements suitable for 6 luminaires etc complete as per S.S and as directed by the departmental authorities.

Providing coil earthing using 1.20mtrs long 20mm dia GI pipe of suitable length with 14SWG insulated GI wire for earth continuity filling of char coal, salt including earth pit with covers etc., complete confirming to IS specification and as per directed by the departmental authorities.

Providing two coats of Silver colour enamel paint of approved make to the Central Divider Poles of 10Mtrs. height from Pole top to bottom over two coats of Red Oxide primer coat with the help of Crane including cost and conveyance of all materials, hire charges of all T & P and all labour charges for painting etc., complete as per the directions of departmental authorities.

Reconditioning of dismantled Central divider poles with 300mm x 300mm x 16mm thickness base plate including welding, turning and finishing, In side the pole terminal strip arrangement suitable for fixing of MCB, Door open and close with door lock arrangements etc., and transportation of poles to stock yard etc., complete as per the directions of departmental authorities.

Engaging of 35 Tonnes Capacity Crane on hire basis for removing and refixing of brackets including hire & operational charges of Crane, wages of driver and helper etc., complete as directed by the departmental authorities.

Supply of Automatic Street Light Control System with Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 150 - 280V AC per Phase, 50 HZ with suitable SMC enclosure of IP 54 protection, MCBs and contactor suitable to control the load of 5KW of Three phase load with necessary clamping arrangements.

Supply of 63 A 415V Porcelain Rewirable Fuse Units of Makes:Sputnik / Million / Gold Medal /GM/Anchor.

Supply and transportation of 16 Sqmm x 4 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) / 1554-I of Makes: Finolex/Finecab as per the approval of the departmental authorities.

Supply and transportation of Outer dia. 50mm and Inner dia. 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes: DURA LINE (Dura Guard) / Precision / CPE or its equivalent make as per the approval of the departmental authorities.

Earth work excavation for cable trench in all soils i.e., hard / loose ground soils and refilling of trench after laying of cable including all labour charges, sundries etc., complete as per directed by the departmental authorities.

Laying of U.G cable up to 50 Sqmm in trench / open area including inserting of cable in the HDPE Duct including all labour charges & sundries etc., complete as per directed by the departmental authorities.

Fixing of LED Luminaires with 3 Core cable and MCBs etc. excluding cost of materials including all labour charges, sundries etc., complete as directed by the departmentl authorities.

Supply of 6-32A SP MCB 10KA C/D Curve ISI Mark of Makes: Legrand-DX3 / Schneider-A9 / Lauritz Knudsen (Formerly L&T) as per the approval of the departmentl authorities.

Supply of 40-63A FP MCB 10KA C/D Curve ISI Mark of Makes: Legrand-DX3 / Schneider-A9 / Lauritz Knudsen (Formerly L&T) as per the approval of the departmentl authorities.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) up to 16Sqmm as per IS specification duly crimped with crimping tool, PVC tape etc. of Makes:Dowels / Jainson / Comet.

Supply of 3 core 1.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / Goldmedal / Finecab as per the approval of the departmental authorities.

Supply of Peeta Boards of size 18" x 24" etc., complete for service mains as directed by the departamental authorities

Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Engaging of Air compressor 7Cmm (Diesel) on hire basis including hire charges, fuel charges, crew charges etc., complete as directed by the departmental authorities.

Supply and transportation of 150W LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, with a System Efficacy >=120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, driver surge protection 4KV, In-house additional surge protection ≥ 10KV with wide/ narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and with minimum warranty of two years. a) LUMINAIRE MAKE: Philips /Crompton / Bajaj / Havells / b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG as per the approval of the departmental authorities.

Providing Service connection for three phase including cost of copper wire and tranco service connection charges including all Labour charges etc., complete as per directed by the departmental authorities.

Supply, delivery and fixing of Three phase Service Meter, suitable sintex Box including of 3No's 63A Fuse Units and suitable clamp sets to electrical poles including bolts nuts, washers, transportation, labour charges and incidental charges etc.complete. as per site condition and as per directed by the departmental authorites.