REPAIR AND REPLACEMENT OF PLATFORM OF PUMP SETS SUPPORTING OF HEADER ALIGNMENT OF SHAFT,CLEANING OF UG SUMP AND OH TANK AND ALLIED WORKS AT MIL STN BHUJ

Amount

Demolition of cement concrete (unreinforced) in floors and pavings n.exc 15 cm thickness (below or above ground level) and debris out side MD land all as specified.

M&L cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in support of CI/DI pipes, Pump set foundation and hardstanding finishing even and fair without using extra cement all as specified.

Removing excavated material exc 250 M but n.exc 500 M and depositing where directed all as specified.

Dismantle the existing damaged glow sign board complete from the entrance gate of Pump House and remove from site. Supply & installation Glow Sign board made out of PGI sheet 1 mm thick fixed with transparent PVC acrvlic sheet cover of thickness 2.5 mm, of colour as directed with letters , logo and digits of approx size 25 x 10 CM of colour as directed, fixed with and including 18 watts, 240 Volt LED tube light fitting with rods as required at site connecting with electrical point using 2 core PVC insulated, 1.5 Sqmm PVC insulated and PVC sheathed stranded copper conductor cable of suitable length with switch, fixing the sign board on GI pole of size 40 mm dia as requried lenght at site , using necessary fixing arrangements viz clamps, nuts, bolts and washers and welding , excavation and PCC work all as specified and directed. Note :1. Size of sign board and colour will be decided by the department as per the site requirement.

S & F MS Frame work as in valve chamber/Sump covers including cutting, Jointing, welding & necessary fabrication including provn of MS angle iron and MS plates with hinges & locking arrangement properly making the chamber/cover in shape for easy to open / close including dismantling old MS Work of any description complete as specified and as directed.

S&F in replacement pressure pump single phase, 240 V, 0.5 HP, pressure tank capacity - 08 Litre running bar, max flow - 2800 Litre/ 2 Hrs, Model: P-500, 8 Litre Q-20-50 Litre/min, Head - 46 mtr, size of inlet/ outlet pipe 25 mm x 25 mm including making necessary GI tubing connection for incoming / outgoing supply with GI tubing 15 mm bore complete all as specified and as directed. Make - Kirloskar/CG/Tycoon.

S&F in replacement pressure pump single phase, 240 V, 1 HP, pressure tank capacity - 19 Litre running bar, max flow - 3300 Litre/ 2.5 Hrs, Model: J-600, 19 Litre Q-20-50 Litre/min, Head - 46 mtr, size of inlet/ outlet pipe 25 mm x 25 mm, including necessary GI tubing connection for incoming / outgoing supply with GI tubing 15 mm bore complete all as specified as directed. Make - Kirloskar/CG/Tycoon.

Supply, fixing, testing and commissioning in replacement R.O. High Pressure Feed Pumps of positive displacement multi-stage, centrifugal type, pumping head 120m - 01No, pump flow rate Cum /Hour, suitable for a flow rate upto 3000 LPH, Make- Ion exchange, having pump construction Stainless steel (S.S. 316) & impeller stainless steel (S.S. 316) and motor TEFC suitable for a supply of 440V, 3 phase, 50 Hertz supply including interconnecting pipes, non return ball/butterfly valves fittings and coupling all mounted on base channel with foundation bolts, & pressure gauges at inlet & outlet of each pump complete all as specified and as directed. Make- ION EXCHANGE/ THERMAX/UV RICH.

M&L in replacement DI bend any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spiogat of size upto 200 mm dia complete all as specified ( lead /gasket for fitting shall be measured and paid separately).

M&L for ruber gas ket joint/ tyton joint for CI / DI pipe of size 80 to 150 mm bore.

M & L in repairs for gland bushes of sluice valve including appropriate size gland packing for following sizes of sluice valves :-

(a) 250 mm bore

(b) 150 mm bore

(c) 100 mm bore

(d) 80 mm bore

M & L in repairs in existing pum sets line universal flexible joint to provide strees relief due to thermal and mechanical vibration or movements in water supply system both flanged ends for DI/CI pipe including all acessories etc complete all as specified of following sizes :-

(a) 200 mm dia CI/DI/MS pipe line

(b) 150 mm dia CI/DI/MS pipe line

(c) 100 mm dia CI/DI/MS pipe line

(d) 80 mm dia CI/DI/MS pipe line

S&F in repair new Leather Sheet flap with Cast iron plate of foot valve of size 100 mm dia with necessary fixing arrangement like nut , bolts washer packing sheet etc including taking out existing defective foot valve from UG sump complete all as directed at site.

S&F in repair new Leather Sheet flap with Cast iron plate of foot valve of size 150 mm dia with necessary fixing arrangement like nut , bolts washer packing sheet etc including taking out existing defective foot valve from UG sump complete all as directed at site.

S&f in replacement for Ultrasonic digitel water level idicator carrying out following works :- Ultrasonic sensor :- Digital display through ultrasonic sensor with electronic buzzer alarm,with the capability to observe the water depth in mter as per the requriment up to 18 Meter hight/depth. This system should operate on 220V/440V AC.Ultrasonic sensor input power supply should be 24 VAC +- 10% Type 2/4 wire,dead band 450mm for up to 18 meter , beam angle (a) : 12 degree/14degree/5degree applied material PP/PVDF/ABS/PC housing ingress protection aganist short circuit , process tem:- 10 degree to 60 degree ambient temp :- 10 degree to 55 degree operating pressure atmospheric accuiracy +- 0.2 % of measured distance + 0.05 % of range ) Resolution ( depende on distance ) : 1mm to 10 mm output : Analog : 4-20MA Top mounted. LCD display controller having 2 relay 4 output contact rating 230V AC, 7 Amp configurable as control output onj separate set ponits with pre defiend logic with 7 segments LED < supported by 4 key tack - tile keybord input will be 4-20 mA liner with resolution Supply 230V AC 50 Hz & output 24 VDC 120 mA.Supply of Alart system through electronic Buzzer alarm on emepty or full tank position with electronically Auto on/Auto off with a suitable gap with timer system & push button to reset the buzzer.Supply of enclosure and fram of SS to hang the sensor , all the accessories fitted should be in power coated paint CRC sheet cabinet,Supply of 3 core shielded copper wire 1.5 Sqmm(As per site requriment) complete.

M&L for dewatering and cleaning of OH reservoir and underground sumps of following capacities with high pressure water jet to remove all masses, algae and dirt and removal of dirty water along with sludge using sludge machine and disposal of the same to a safe distance and including scrubbing of internal surfaces using industrial vacuum machine and applying of anti bacterial sterilization spray and apply one coat white wash to walls, floors and ceilings internal surfaces of reservoirs and UG sumps of the following capacity complete all as specified as directed :-(Sr No.19 to 22)

100000 gallons capacity over head reservoirs on 21 mtr staging( HLR pump house)

100000 gallons capacity over head reservoirs on 21 mtr staging( Pump house No - 2)

100000 gallons capacity over head reservoirs on 21 mtr staging( KS -II Pump house )

100000 gallons capacity over head reservoirs on 21 mtr staging( AD Pump house )

S&F in replacement monoblock water pump set, single phase, 240 V, capacity 1 HP, suction/delivery pipe 25 mm x 25 mm, Head range-6 to 40 mtrs & discharge range - 3200 to 1600 Lph fitted with thermal overload protector & IP-44 protection 'B' class of insulation, Both side ball bearing double shielded including necessary GI tubing connection for incoming / outgoing supply complete all as specified and directed. Make: Kirloskar/ Crompton Greaves/ Usha.

Cleaning of Narmada water filtration Plant area, MLI,AD,HLR,KS-II,MAP pump House and OHT area by manually/JCB , cutting of unwanted grass,Shrubs,trees,debries etc and after cleaning the entire area dump material should be throughn out the campus area complete all as directed by Enginner-in-Charge.

Supply and Fixing in replacement of Key for operating of sluvice valave of size upto 250 mm.

S&F in replacement of anti vibration mounting pad for mounting upto75 HP centrifugal Pump sets complete with allacessories.

Supply and Fixing UPVC pipe 20 mm dia pipe complete with fittings in required length for making the connection for pump set priming system complete all as specified and directed

S & F in repair UPVC Ball valves with operating handle (stop valve) of size 20 mm dia complete suitable for fittings with ASTM - 1785, Schedule 40 UPVC pipes including fittings i.e. union, socket etc complete all as specified.

S&F in repair reverse dial indicating alignement gauge for alligement of up to 75 HP centrifugal pump set installed in water supply installation including all fixinning acessories complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair chemical dosing Pump high pressure for 6 MLD water treatment Plant single head gear motored adjustable dosing pump with accessories suitable for water supply installation including replacement of lead tubing, connecting nuts, injection check valve, clay weight, ferules etc. all as specified and directed.

Supply and Fixing in repair dosing system consisting 100 ltr FRP Tank with FRP Lid & level gauge along with agitator with shaft & blade in plastic tank complete all as specified and directed.

Supply and fix in repairs in existing line, hand operated butterfly valve with cast iron disc of pressure not less than PN-10 of size 150 mm dia with complete fixing acessories all as specified and directed.

Material and labour for installing, testing and commissioning fully automatic soft starter panel for 75 HP centrifugal pumpset, locking arrangement, three phase, 430 V, 50 Hz, suiatble rating semiconductoer fuse, CRCA sheet 2 mm thick metal enclosure, duly powder coated and angle iron frame which is made out of 50x50x6 mm angle iron, factory fabricated cubical type weather proof, mounting on floor, civil work, including following protection:- (i) Under voltage & Over Voltage (ii) Under load & Over load (iii) Single phase preventor (iv) phase reversal (v) Earth fault (vi) Short circuit (vii) Unbalanced voltage (Negative phase sequence relay) (viii) Switching surge

Material and labour for installing, testing and commissioning fully automatic soft starter panel for 50 HP centrifugal pumpset, locking arrangement, three phase, 430 V, 50 Hz, suiatble rating semiconductoer fuse, CRCA sheet 2mm thick metal enclosure, duly powder coated and angle iron frame which is made out of 50x50x6 mm angle iron, factory fabricated cubical type weather proof, mounting on floor, civil work, including following protection:- (i) Under voltage & Over Voltage (ii) Under load & Over load (iii) Single phase preventor (iv) phase reversal (v) Earth fault (vi) Short circuit (vii) Unbalanced voltage (Negative phase sequence relay) (viii) Switching surge

Material and labour for installing, testing and commissioning fully automatic soft starter panel for 40 HP centrifugal pumpset, locking arrangement, three phase, 430 V, 50 Hz, suiatble rating semiconductoer fuse, CRCA sheet 2mm thick metal enclosure, duly powder coated and angle iron frame which is made out of 50x50x6 mm angle iron, factory fabricated cubical type weather proof, mounting on floor, civil work, including following protection:- (i) Under voltage & Over Voltage (ii) Under load & Over load (iii) Single phase preventor (iv) phase reversal (v) Earth fault (vi) Short circuit (vii) Unbalanced voltage (Negative phase sequence relay) (viii) Switching surge

Material and labour for installing, testing and commissioning fully automatic soft starter panel for 30 HP centrifugal pumpset, locking arrangement, three phase, 430 V, 50 Hz, suiatble rating semiconductoer fuse, CRCA sheet 2mm thick metal enclosure, duly powder coated and angle iron frame which is made out of 50x50x6 mm angle iron, factory fabricated cubical type weather proof, mounting on floor, civil work, including following protection:- (i) Under voltage & Over Voltage (ii) Under load & Over load (iii) Single phase preventor (iv) phase reversal (v) Earth fault (vi) Short circuit (vii) Unbalanced voltage (Negative phase sequence relay) (viii) Switching surge

Material and labour for installing, testing and commissioning fully automatic soft starter panel for 22 HP centrifugal pumpset, locking arrangement, three phase, 430 V, 50 Hz, suiatble rating semiconductoer fuse, CRCA sheet 2mm thick metal enclosure, duly powder coated and angle iron frame which is made out of 50x50x6 mm angle iron, factory fabricated cubical type weather proof, mounting on wall, civil work, including following protection:- (i) Under voltage & Over Voltage (ii) Under load & Over load (iii) Single phase preventor (iv) phase reversal (v) Earth fault (vi) Short circuit (vii) Unbalanced voltage (Negative phase sequence relay) (viii) Switching surge

Fixing only water meter of size 15 mm complete including all fixing acessories all as directed by Engr-in-Charge.Note :- Water Meter will be issued under sch 'B'.

Fixing only water meter of size 50 mm complete including all fixing acessories all as directed by Engr-in-Charge.Note :- Water Meter will be issued under sch 'B'.

Fixing only water meter of size 100 mm complete including all fixing acessories all as directed by Engr-in-Charge.Note :- Water Meter will be issued under sch 'B'.

Fixing only water meter of size 150 mm complete including all fixing acessories all as directed by Engr-in-Charge.Note :- Water Meter will be issued under sch 'B'.

Material and Labour for replacement of Polyurethane, nylon, water tubing of sizes 1/4" and 1/2" with 6mm (Outer dia) x 4mm (Inner Dia) and 12mm (Outer dia) x 8 mm (Inner dia) respectively.

Supply and Fix Flow Meter Digital, online type of range 0-9999 Ltr with batch count ,MOC : ABS Flow senser : magnetic turbine wheel, Display : LCD double line complete.

Supply and fix in replacement Victolic Coupler with Bush of Pressure Range 35 Kg /Sqcm size 1" complete.

Supply and fix in replacement Victolic Coupler with Bush of Pressure Range 35 Kg/Sqcm size 1.5" complete.

Supply and Fix diaphragm valve 250 mm dia, with rubber lining Complete.

Material and Labour for necessary servicing of RO plants of capacity 3000 LPH and equipment including nuts, bolts washers, SS fittings, cables, wires, cleaning of RO membranes by using appropirate chemicals,misc items reqd to make functional the RO plant, incl testing of water to reqd TDS as per BIS and producing test certificate from a Govt lab all as directed.

M &L for preparation of old painted iron surfaces of the complete RO plant of capacity 3000 LPH by cleaning, scrapping and sand blasting wherever reqd and applying two coats of Duco paint for MS surfaces as per existing colour over a coat of red oxide primer, aluminium paint for SS surfaces including necessary Markings etc complete all as specified and directed by engr in charge

S&Filled filter media in Silex 50kg : 01 Bag, pebble 50kg : 02 Bag, Garnet 50kg : 02 Bag, Sand 50 kg : 02 Bag, Anthracite 25 kg : 01 Bag suitable for RO plant of capacity 1500LPH complete all as directed

Supply installation and commissioning Electrical control panel(microprocessor base) Volt meter,Ampere meter ,Overload,single phase proctection, etc..in built suitable for RO plant of 3000 LPH capacity complete. Note :- The drawing shall be submitted by contractor before placing the order.

S&Fix Rotameter suitable for RO plant of capacity range 10000 LPH,MOC : polycarbonate complete all as directed.

Material and Labour for replacement of High Pressure Pipes UPVC Sch 80 of size 1'' with operating pressure 35.0 Kg/Sqcm complete.

Material and Labour for replacement of High Pressure Pipes UPVC Sch 80 of size 1.5" with operating pressure 35.0 Kg/Sqcm complete.

Material and Labour for replacement of High Pressure Pipes UPVC Sch 80 of size 2" with operating pressure 35.0 Kg/Sqcm complete.

Supply and fix Low Pressure Switch online type of pressure range 0-7 Kg/Sqcm , Stainless steel Aluminium and brass for 240/415 Volts AC 10 Amps, 1/4" male bottom connection complete Make Orrin/ Denfose

Supply and fix High Pressure Switch Online Type for Pressure Range between 0-21 Kg/Sqcm, Make Danfose, Stainless Steel Aluminium Brass type, 240/415 Volts AC 10 Amps, 1/4" male bottom connection complete

Supply and Fix Pressure Gauge - Low panel mounted Online type for Pressure Range 0-7 Kg/sqcm Make Aquaslux Water Stainless Steel Glycerine Liquid filled of size 2.5" Dia back connection 1/4'' male complete

Supply and fix Foot Valve conforming to IS 4038, 50 mm (2”) dia.

Supply and fix in repairs RO Membranes housing cover for 3000 LPH RO Plant for holdeing of Membrane complete all as per specified and directed.

Disconnecting and taking down old existing steel/PVC tubing and connections of any description/ grade and in any position in trenches/under floors / on walls etc including all fittings/accessories and fixtures such as bends, union, elbow socket, valves, for 80 mm dia pipe complete all as specified and directed.

Supply and Fixing in any length UPVC pipe 80 mm dia pipe manufactured as per ASTM-D-1785 as per IS-559, Schedule-40 complete with fittings, including earth work and laid in trenches in required length complete all as specified and directed

M&L for connection bandhiya for exesting damaged pipe line of size up to 250 dia pipe line including necessary excavation and other requried work at site complete all as specified and directed.

M/s Bombay Novelty Stores