Telugu Ganga Project

Earth work excavation in Ordinary soils by manual for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308).

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc.,complete and stacking them within 100metre lead

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P including Seignorage etc., complete for finished item of work. (APSS NO. 309 & 310)

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P including Seignorage etc., complete for finished item of work. (APSS NO. 309 & 310) vide Page No.XI SOR 2017-18 with cost of cartd earth/gravel

Plain Cement Concrete (1:3:6) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including Seignorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 402)

Random Rubble stone masonry in CM (1:8) prop: (Cement: Sand) using hard stones from approved quarry including cost and conveyance of all materials like cement, sand, water, stones etc., from approved quarry, to site and including Seignorage charges, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing etc., and Overheads & Contractors profit etc., complete for finished item of work in foundation and basement. (APSS No. 601 & 615)

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work FOUNDATIONS, PLINTH, PEDESTALS (Below Plinth) FOUNDATIONS

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work FOUNDATIONS, PLINTH, PEDESTALS (Below Plinth) Pedestals

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work FOUNDATIONS, PLINTH, PEDESTALS (Below Plinth) Plinth Beams

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS Columns upto Ground Floor

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS Columns 1st Floor

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS Lintels Ground Floor

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS Lintels First Floor

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, Beams Ground Floor

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, Beams First Floor

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, Sunshades of 600 mm wide with a thickness of 75mm at fixed end and 50mm at free end for Ground Floor

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, Sunshades of 600 mm wide with a thickness of 75mm at fixed end and 50mm at free end for First Floor

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, Slab 150 mm Thick Ground Floor

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, Slab 150 mm thick 1st Floor

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, Slab 115 mm Thick Ground Floor

VRCC M- 20 Design mix corresponding to Table 9 of IS 456 using WEIGHT BATCHER/MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seignorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc complete (APSS N0.402) with minimum cmen content as per IS code from standrd supliers approved by the departmentincluding pumping, centering, shuttering layin concrete,vibrating,curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, Slab 115 mm thick 1st Floor

Brick Masonry in CM (1:3) with Bricks with traditional size 23 x 11 x 7 cms 2nd class Ground Floor

Brick Masonry in CM (1:3) with Bricks with traditional size 23 x 11 x 7 cms 2nd class First Floor

11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, Seignorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials. GROUND Floor GROUND Floor

11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, Seignorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials. First Floor

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponge finishing for Internal walls GROUND Floor

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponge finishing for Internal walls First Floor

Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponge finishing for External Walls Ground Floor

Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponge finishing for External Walls First Floor

Flooring with vitrified policed tiles of size not less than 600 x 600 x 8-10 MM thickness regular finished normal colours, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.Kgs per Sq. Mt & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost & Conveyance of all materials like cement, sand water and tiles etc., complete, including Seignorage charges, etc., complete for finished item of work. GROUND Floor

Flooring with vitrified policed tiles of size not less than 600 x 600 x 8-10 MM thickness regular finished normal colours, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.Kgs per Sq. Mt & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost & Conveyance of all materials like cement, sand water and tiles etc., complete, including Seignorage charges, etc., complete for finished item of work. First Floor

Flooring with Ceramic Tiles of 7.3mm thick 1st. quality of any shade as approved by Engineer - in - charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707) GROUND Floor

Flooring with Ceramic Tiles of 7.3mm thick 1st. quality of any shade as approved by Engineer - in - charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707) First Floor

Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work Ground Floor

Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work First Floor

Providing Doddoing to internal walls to 15 cm height/risers of steps with 7 mm thick Ceramic tiles of size not less than 598 x 598 x 8 MM thickness regular finished normal colours, length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 Kgs per Sq. Mt and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials like tiles, cement, sand and water etc., complete including Seignorage charges, etc., complete for finished item of work Ground Floor

Providing Doddoing to internal walls to 15 cm height/risers of steps with 7 mm thick Ceramic tiles of size not less than 598 x 598 x 8 MM thickness regular finished normal colours, length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 Kgs per Sq. Mt and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials like tiles, cement, sand and water etc., complete including Seignorage charges, etc., complete for finished item of work First Floor

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1Kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, Seignorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work First floor

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponge finishing for Ceiling Ground Floor

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponge finishing for Ceiling First Floor

Supply and fixing of TATA GI ventilator along will glass in complete shape of size 0.7x0.3 feet (2.4 feet x 1feet)

Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 10 mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineerin-Charge for finished item of work

Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification.

White washing three coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost & conveyance of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work for Ceiling

Painting to new walls with 2 coats of ready mixed oil bound washable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls for:-Internal Colouring - Oil Bound Distemper paint - 2 Coats + 1 coat primer

Painting to new walls with 2 coats of ready mixed oil bound washable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls for:-External Walls - Oil Bound Distemper paint - 2 Coats + 1 coat primer

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded

Supply and fixing of G.I doors single leaf with size 1200 x 2100, including cost of all materials fitting, transport, etc complete item in full shape-D1

Supply and fixing of G.I windows with size 1500 x 1200, including cost of all materials fitting, transport, etc complete item in full shape

Supply and fixing of G.I windows with size 900 x 1200, including cost of all materials fitting, transport, etc complete item in full shape

Supply and fixing of G.I doors double leaf with size 1200 x 2400, including cost of all materials fitting, transport, etc complete item in full shape-D1

Supply and fixing of G.I doors double leaf with size 1200 x 2100, 7 inch thickness including cost of all materials fitting, transport, etc complete item in full shape (Make Tata Pravish,Jindal)

Supply and fixing of G.I windows with size 1200 x 1350, including cost of all materials fitting, transport, etc complete item in full shape (Make Tata Pravish,Jindal)

Providing false ceiling with Plaster of Paris and G.I frame work complete in full shape, with good finishing, painting etc in full shape.

Flooring with chequrred terrazzo tiles of 22 mm thick (medium shade) set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistencyspread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tilesetc., complete, including seigniorage charges, complete for finished item of work, .

Supply and Run of 2 of 10 Sq.mm WPSC Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains.

Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kASPMCBs as out going including internal connections and labour charges forsurface / flush mounting etc., complete.Supply of12 Way SPN DB with IP 43 Protection suitable for …………. S.P outgoings and for 1 No incomer etc.,

Supply and erection of 100A, FP Isolator.Makes: As per list of recommended brands as category I.Makes: Legrand-DX3 / Schneider-A9/Hager-h3/Siemens-5SX4/ Havells STADx/ Lauritz Knudsen(formerly L&T) AU/Indo Asian-Opti pro/HPL(Techno)/Anchor (Uno Plus)/ABB-SDB200 Makes: As per list of recommended brands as category I.Makes: Legrand(Ekinox 3) / Schneider-A9/Hager - Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (formerly L&T) -Newrange/Indo Asian-Opti Pro/ HPL

Supply and erection of Panel mounting 60 / 63A, 4 Pole, 10 / 16kA, MCCB with thermal magnetic setting /Microprocessor based release arrangement with all connections etc., complete on existing panel. Supply and erection of63A, 4 Pole,30mA RCCB for earth leakage protection.Makes: As per list of recommended brands as category I.Makes: Legrand-DX3/SchneiderA9/Hager-h3/Siemens-5SX4/ Havells STADx/ Lauritz Knudsen (formerly L&T) -AU/Indo Asian Optipro/HPL(Techno)/Anchor (Uno Plus)/ABB-FB200

Supply of 6-32A, SP MCB 10KA C/D Curve ISI Mark. Makes: As per list of recommended brands as category I Makes:Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx / Lauritz Knudsen (formerly L&T)-AU/Indo Asian-Opti pro/ HPL (Techno) /Anchor (Uno Plus)/ABB-SB200

Supply of 40-63A, SP MCB 10KA C/D Curve ISI Mark. Makes: As per list of recommended brands as category I Makes:Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx / Lauritz Knudsen (formerly L&T)-AU/Indo Asian-Opti pro/ HPL (Techno) /Anchor (Uno Plus)/ABB-SB200

Supply and Fixing of 25mm dia 2 to 2.2mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.

Supply and Fixing of 25mm dia 1.6 to 1.8mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and run of 2 of 14/0.3mm (1.0Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and run of 2 of 14/0.3mm (1.0Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for for earth continuity including all labour charges etc., complete.

Supply and run of 2 of 22/0.3mm (1.5Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.

Supply and run of 2 of 56/0.3mm (4Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.

Supply and run of 2 run of 84/0.3mm (6.0Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight. category I.

Supply and fixing of batten holder /slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with bulb (for new installation). Supply of 7 to 9 w Lamp with input voltage 90 to 300V, Color temperature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base. Makes: As per list of recommended brands Phillips /Crompton / Bajaj / Havells / Halonix/GM/HPLSyska / Green Lites / Fortune Arrt / GoldMedal/ Luker/Leo/Orbit /Rhino / GLO LED /Million/Victoria/Benlo/Goldwyn/Sturlite/AJUSS/Orient

Supply of 48" (1200mm) Sweep star rated Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter/min, but without Regulator. Makes: As per list of recommended brands.

Supply and erecting resistance type regulator for ceiling fans 900/1200/1400mm sweep complete erected on existing board.

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Supply of 6A / 10A, 1 Way, 1 Module, Modular Switch. ISI marked Makes: As per list of recommended brands as category I.Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/LiviaAB)/Crabtree(Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series 7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of 6A / 10A, 2 Way, 1 Module, Modular Switch. ISI marked Makes: As per list of recommended brands as category I. Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/LiviaAB)/Crabtree(Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series 7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of of 6A / 10A, 2 Pin, 2 Module, Modular Socket. ISI marked Makes: As per list of recommended brands as category I. Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/LiviaAB)/Crabtree(Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series 7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of of 6A / 10A, 3-Pin, 2 Module, Modular Socket with shutter.. ISI marked Makes: As per list of recommended brands as category I. Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/LiviaAB)/Crabtree(Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series 7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of of 6A / 10A, 1 Module, Modular Switch with Neon Indicator. ISI marked Makes: As per list of recommended brands as category I.Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/LiviaAB)/Crabtree(Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series 7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of of16A / 20A, 1 Way, 1 Module, Modular Switch. . ISI marked Makes: As per list of recommended brands as category I. Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/LiviaAB)/Crabtree(Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series 7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of of16A/6A, 1 way, Combi Socket Modular Socket with shutter. ISI marked Makes: As per list of recommended brands as category I. Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/LiviaAB)/Crabtree(Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series 7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of of20A, 1 Way, 1 Module, Modular Switch with Indicator. ISI marked Makes: As per list of recommended brands as category I. Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/LiviaAB)/Crabtree(Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series 7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of of20A, Modular Socket with shutter. ISI marked Makes: As per list of recommended brands as category I. Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/LiviaAB)/Crabtree(Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series 7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of of1 or 2 Modular Cover Frame. As per list of recommended brands as category I.Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of of 3 Modular Vertical Cover Frame.. As per list of recommended brands as category I.Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of of 6 Modular Cover Frame.. As per list of recommended brands as category I. Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of of 8 Modular Horizontal / Vertical Cover Frame. As per list of recommended brands as category I.Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of of 12 Modular Vertical Cover Frame.. As per list of recommended brands as category I.Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (formerly L&T))/ GM-(Four-Five)/Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE)/Anchor Roma (PLUS)/Precision(Series7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of 1 or 2 Hot Dip galvanized 18 SWG Module metal box with earthing terminal.

Supply of 3 Hot Dip galvanized 18 SWG Module metal box with earthing terminal.

Supply of 6 Hot Dip galvanized 18 SWG Module metal box with earthing terminal.

Supply of 8 or 9 Hot Dip galvanized 18 SWG Module metal box with earthing terminal.

Supply of 12 Hot Dip galvanized 18 SWG Module metal box with earthing terminal.

Supply of ...............INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation with copper condenser.

Supply, Transportation and fixing of storage / Pressure type Vertical /Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with Glass/SS tank and ABS plastic body of ........ capacity towithstand up to 6.5 bar of water pressure including all standard accessories and dead weight pressure reducing valve on outlet side,including cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and all labour charges etc., complete. Makes: As per list of recommended brands Makes: Prevailing models of Crompton/ Jaquar / Venus /Racold / AO Smith /Havells /Warmex/ GM/ Goldmedal makes and shall be confirming to SOR specifications

Supply and fixing of Electronic musical bell on 150 x 200 mm (6"x8") decolam block including giving connections cost of all accessories and all labour charges etc., complete

P.V.C. Conduit (Surface) -Supply and Fixing of 25mm dia 1.5mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains.

Supply of 5.0 KVA 1-phase, automatic Electronic Voltage Stabilizer.Makes: As per list of recommended brands as category I. Makes: V-Guard / Real Guard / Uni Stab / ITL.

Supplying and fixing UPVC Nahani Traps 76.2 mm (3") with jally and fixing all specials like PVC Pipe, Bends, Tees, Zenctions etc,. as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and CP short bend and fixed using required size of nails and screws, 12.7mm PVC connections with brass union nuts CP coated and 12.70mm dia. NP bib tap complete including cost and conveyance of all materials to site, for finished item of work for all floors.

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parry ware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/ Esso or equivalent complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 400 gms Seiko or equivalent , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work

Supplying and fixing of 25.4MM Dia , 609.6MM Long Aluminium Anodized Towel Rod with Brackets and Aluminium screws including cost and conveyance of all materials, labour charges etc., complete for finished item of work.

Supplying and fixing NP Bib Taps of size 12.70MM Dia 400 Grams of Indian make including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors.

Supplying and fixing of 90MM Dia SWR/ UPVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)

Supplying and fixing of 110MM Dia SWR/ UPVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)

Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks

Supplying and fixing White glazed flat back Bowl Urinals of size 440 MM x 265 MM x 315 MM with integral flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7MM PVC connection with Brass Plumber Union nuts CP coated, 12.70 MM Push Cock 1st quality of approved make , 31.75 MM Dia PVC flexible waste pipe of 914.4 MM length of Ist quality including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work for all floors.

Supplying & fixing 22.20 MM OD Pipe- SDR 13.5, CPVC pipe of ISI make, Ashirvad in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges , Overheads & Contractors profit complete for finished item of work.

Supplying & fixing 28.60 MM OD Pipe- SDR 13.5, CPVC pipe of ISI make, Ashirvad in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges , Overheads & Contractors profit complete for finished item of work.

a) Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with accessories ,BMW-I.119 p.no 240, s.no 713

Supply & Fixing of Wall Mixer with provision for overhead shower and 115mm long bend pipe with wall flange Jaquar make Continental series, Chrome finish with 7 years warranty,BMW-I.177 , p.no 242,s.no 771

Supply & Fixing of Exclusive overhead shower with 190mm long light body shower arm Jaquar make Continental series, Chrome finish with 7 years warranty,BMW-I.178 , p.no 243,s.no 772

Supply & Fixing of Toilet paper holder Jaquar make Continental series, Chrome finish with 7 years warranty ,BMW-I.183, p.no 243,s.no 777

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame andcover of 20 Kg. BMW-B.06, P.no 213, s.no 83