REPAIRS TO COMPOUND WALL, HARD STANDING AND APPROACH PATHS ETC IN TECH AREA BHUJ AND KHAVDA AREA AT AF STN BHUJ

Amount

Demolition of PCC block masonry built in cement mortar complete all as specified and directed by Engineer-in-Charge.

Material & labour for Precast cement concrete block masonry with solid blocks exc 10cm in width (1:5:8) (using 20mm graded stone aggregates) and setting in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 15mm thick in CM (1:4) on block masonry surfaces finished even & smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new or previously untreated concrete or PCC block masonry external surfaces and applying two coats of exterior emulsion paint (in camouflage pattern as approved by the GE) over a coat of primer complete all as specified and directed by Engineer-in-Charge.

Demolition Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75 mm thick providing cement concrete, type C2, (1:3:6), (using 40mm graded stone aggregate) as in path/hard standing /base of interlocking tiles, checured tiles complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 100 mm thick providing cement concrete, type B2, (1:2:4), (using 20mm graded stone aggregate) as in path/hard standing finishing smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 100 mm thick providing cement concrete, type D2, (1:4:8), (using 40mm graded stone aggregate) as in path/hard standing complete all as specified and as directed by Engineer-in-Charge.

Material & labour for finishing surface of concrete roads, pavements, by brooming complete all as specified and directed by Engineer-in-Charge.

Forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Gde 'B' for key scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling stone slabs and tiles of laid dry of any description or thickness in floors, aprons etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for machine pressed precast concrete interlocking paver block any shape and size cofirming to IS 15658-2006 of 60mm thickness M-35 grade complete all as specified and directed by Engineer-in-Charge.

Material & labour sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

Material & labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with cement and pigment over 15 mm thick screed bed set in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

Supply and fix framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing new or previously untreated surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed by Engineer-in-Charge.

Dismantling existing galvanised steel punched type concertina coil 1050 mm dia placed on top of the wall inside the angle iron horns/ GI barbed wire type with necessary GI wire complete all as specified and directed by Engineer-in-Charge.

Supply and fix galvanised steel punched type concertina coil of 1050mm dia (dia of coil when stretched to 8 m length with Nos. of circles 50, Nos. of clips 230 with weight 15.60 kg/ coil and recommended and average coverage area is 6 RM/ coil) and fixed to angle iron post/ struts with 3.15mm dia GI wire etc complete all as specified and directed by Engineer-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in cement complete all as specified and directed by Engineer-in-Charge.

Dismantling fencing wire mesh, any type complete all as specified and directed by Engineer-in-Charge.

Supply & fix chain link fencing plastic coated MS wire made out of 3.5 mm outer dia of size 75mm x 75mm including straining bolts etc including provn of binding wire or with nuts/bolts complete all as specified and directed by Engineer-in-Charge.

Material & labour for 10mm dia and over round bar, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Material & labour for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

Material & labour for cement concrete 1:3:6 type C2 (using 40 mm graded curshed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge

BHAVANI PROVISION STORES (BID ID -3155595)

MARA CONSTRUCTION CO (BID ID -3157651)

Khodiyar Construction (BID ID -3163895)