Strengthening And Repair of Various Unit at Seeshmahal Filter Plant No 01 Under Haldwani Kathgodam water supply Scheme.

Rates for Strengthening And Repair of Various Unit at Seeshmahal Filter Plant NO. 01 Under Haldwani-Kathgodam water supply Scheme.

PART A: E&M SITC Works Pump House ADB 01

Supply & Fixing of centrifugal pump of Type UP100/29 Total head 23 m 132.50 cum/hr, size 100x150 mm 1 with three phase induction motor of 20 hp (Hydel OHT) (Kiloskar Make)

Supply & Fixing of centrifugal pump motor set of head 2 range 18/29 m, 28/15 ips with prime mover of 10 hp (MES) (Kiloskar Make)

Supply and fixing of 10 hp DOL starter cum panel with 3 MPD

PART B: E&M Repair Works Pump House ADB 01

Repair of 20 hp motor with pump overhauling

Complete Rewinding of above motor

Supply and fixing of bearing (6308)

Gland Bush

Cartage of pump motor set from site to service point and vice versa

Overhauling of Pump

Repair of 15 hp motor with pump overhauling

Complete Rewinding of above motor

Supply and fixing of bearing (6308)

Gland Bush

Cartage of pump motor set from site to service point and vice versa

Overhauling of Pump

Supply and fixing of three core copper cable of following sizes 10 sqmm

Supply and fxing of LED bulb and tubelight as Followings 20 W LED Tubelight

20 W LED Bulb

Providing of leather packing for Valve/NRV

PART C: Civil Works Pump House ADB 01

Repairing of floor of pumphouse as per followings:

Cement concrete Flooring 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate) Finished with a floating coat of neat cement, including cement slurry, but exilulling the cost of ingifte etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

RCC work for manhole cover for Existing Valve Chambers

PART D: E&M Repair Works Pump House MES 02

Supply & Fixing of Bakelite Sheet

Supply & Fixing of copper cable 16 Sqmm

Supply & Fixing copper lugs 16 Sqmm

Supply & Fixing 100 A MCB

Supply & Fixing of 1 hp pump motor set for Dewatering Purpose

PART E: Civil Works Pump House MES 02

Excavating, supplying and filling of local earth (Including royalty) by mechanical transport upto a lead of 5 K.M. also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, silles of foundation etc. complete.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 thick with 20 mm nominal sinestone aggregate

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

12 MM cement plaster of mix 1 : 4 (1 cement : 4 fine sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1 : 4 (1 cement : 4 coarse sand)

12 MM cement plaster of mix 1 : 4 (1 cement : 4 find sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 thick with 20 mm nominal sinestone aggregate

Making of concealed Electric points with complete wiring, boxes switches etc.

Providing and applying fibre reinforced elastomeric liquid waterproofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litre/10 sqm. One coat of self-priming of elastomeric water proofing liquid (Dilution with water in the ratio of 3 : 1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer in Charge

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave,holdfasts etc. Complete sed stacking within 50 metres lead of area beyond 03 Sq. metres

Fixing chowkhats in e existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hoid fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), planting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge Door showhats.

Wall paiming with acrylic emulsion paint of approved brand and manufacture to give an even shade Two or more coats on new work

Renewing glass panes, with wooden flirts wherever necessary Float glass panes of nominal thickness 5mm (weight not less than 12.5kg/sqm)

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces

Part F: E&M Works Pump House Bed Wash 03

Replacement of old and burnt control panel of fiter bed cleaning motor pumpsets of 30 hp

Dismantling of old panel from wall

Supply & Fixing of Bakelite Sheet of size 10’ˣ4’

Supply and Fixing of 3 pole MCCB of 100 A with box

Supply and Fixing of 4 pole MCCB of 250 A with box

Supply and Fixing of Digital Ameter with CT 100/5

Supply and Fixing of Digital Voltmeter

Supply and Fixing of Busbar 200 A with SS box

Supply and Fixing of Star Delta starter of 30 hp for bed wash motor with protection device

Supply and fixing of following copper cable

Supply and Fixing of following copper lugs

Supply and Fixing of contactor set for compressor unit

Repair of Air compressor for bed washing as per below: Rewinding of 25 H.P. motor

Overhauling of Air Pump

Part G: E&M Works Clarifier

Repairing of Old Cl valves including cutting threading Welding etc with MS Gutka 300 mm

Sludge Removal by mechanical means of Clarifier/flash Chamber/Settling tank Pi*r*r*h

Providing and Fixing of MS Angle ion for Silt Ejector 75x75x6 mm @ 6.8 Kg/M

MS Flats up to 10 mm thickness

Tie Rods 20 mm

Rubber Sheet (Density 1522 Kg/cum)

Providing and Fixing nut bolts of size as per Requirement

Providing and Fixing of MS Angle iron for Mixer scrapper 75x75x6 mm @ 6.80 kg/m

MS Flats up to 10 mm thickness

Rubber Sheet

Tie Rods

Applying Metal Primer on angle iron of scrapper

Part H: T & P Works

Providing Plastic chairs for Filter Plant 01

Providing long beam rechargeable torch for Filter Plant

Providing Umbrellas of full size for Filter Plant 01

Providing Life safety jackets for Filter Plant 01

Providing Ceiling fan of high speed for Filter Plant 01

Providing a Tool box with all sizes spanner, wrenches etc of good brand for Filter Plant 01

Providing a Drill Machine with set of drill bits of good brand for Filter Plant 02

Providing LED bulbs of 20 W for Filter Plant 01

Providing following T&P for Filter Plant 01

Pickaxe with handle

Sickle

Spade with handle

Hammer with handle

Small size steel almirah

Part I: Civil Work FP 01 Campus

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work including cutting, hoisting, Fixing in position and applying a priming coat of approved steel primer all complete.

Supply and fixing of Metal Sheet for roofing with nut bolt complete of minimum 0.45 mm thickness

Excavation of earth for pipe live in following strara lift upto 1.50 m. and lead upto 30.00 m. including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60.00 from trenches including

Providing and laying in position cemast concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1 : 4 : 8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 nominal size)

Brick work with common burnt clay machine moulded perforated brickas of class designation 12.5 conforming to IS:2222 in superstructure above plinth level up to floor five level in cement mortar 1 : 6 (1 cement : 6 coarse sand)

12 mm thick PC Plaster) 1: 6 cement and local sand mortar including supply of all labour material, TAP etc. all complete.

Metal paint in frame structure and Poles

M/s. shailendra Singh (BID ID -350428)