DMF

Earth work excavation for Structures as per drawing and technical specifications clause 305.1 including stting out , construction of shoring and bracing , removal of stumps and other deleterious material and disposal upto a lead of 50m' dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical Specifications complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Filling with sand in trenches, sides of foundation and basement with intial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidential, labour charges, hire charges of T&P etc,. complete for finished item of work (APSS NO.309 and 310) Including Overheads charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Providing concrete for plain concrete M10 in open foundations using 40 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Reinforced cement concrete M-25 Grade( Design Mix) using 20 & 10mm size graded HG Metal using Concre Mixer in foundations complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH excluding cost of steel Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Raft.

Plain cement concrete M15 Nominal Mix in sub structures using 40 mm,20mm & 10mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Reinforced cement concrete M-25 Grade( Design Mix) using 20 & 10mm size graded HG Metal using Concre Mixer in foundations complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH excluding cost of steel Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Side Walls

Reinforced cement concrete M-25 Grade( Design Mix) using 20 & 10mm size graded HG Metal using Concre Mixer mixed in Superstructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH excluding cost of steel Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Slab

Construction of sub grade using suitable local selected soil aggregate spreading in uniform layers with tractor mount appropriate grading arrangements on prepared surface, mixing by mix in place method at OMC and compaction with three wheel 80 -100 KN static roller capacity to achieve the desired density complete as per (Table 2.3 of IRC SP 77-2008) specificaions Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Construction of granular sub-base by providing well graded material / Close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller 80-100 kN / Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 MORD / 1600 MORTH, for Bars below 36 mm dia including over laps and wastage, where they are not welded Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Cost & Supply of MS Grills including Cost & Conveyance to work spot and Fabrication charges of steel like cutting Rods,Welding grills ,placing in position etc. complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST