Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹65,000
Closing Date
30 Nov 2026, 5:14 pm7d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Dy. Conservator of Forest, Kutch Extension Division Kachchh-Bhuj
Construction of Forester Quarters in the Naliya Range under the Kutch Social Forestry Division – Year: 2026-27
361558
19/2026-27
Open
Civil - All
Works
Kutch
₹3,000
Deputy Conservator of Forest Social Forestry Division - Kachchh
₹65,000
30 Nov 2026
1 Nov 2026
1 Dec 2026
1 Nov 2026
13 Nov 2026
1 Nov 2026
90 days
NAME OF WORK: CONSTRUCTION OF RFO QUARTER AT FOREST COLONY AT RAPAR, RANGE-RAPAR
Sr.No. QTY. DESCRIPTION
Total Rate Unit Amount
1 43.52 ITEM NO-1 Excavation for foundation upto 1.5 m depth including sorting out and
stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B)
Dense or Hard soil
2 16.16 ITEM NO-2 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6-
hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost
of formwork in (A) Foundation and Plinth
3 8.08 ITEM NO-3 Providing and laying controlled cement concrete M.250 and curing
complete excluding the cost of formwork reinforcement for reinforced concrete work in
(A) Foundation,fottings,Bases of columns and mass concrete. 4330.79 Cmt.
4 18.90 ITEM NO-4 Providing formwork of ordinary timber planking so as to give a rough
finish including centring shuttering and propping etc.. Height of propping and centring
below supporting floor to ceiling not exceeding 4 M and removal of the same for in situ 180.40 Sqm
reinforced concrete and plain concrete work in (A) foundation, footings and bases of
columns etc and mass concrete.
5 6.68 ITEM NO-5 Providing and laying controlled cement concrete M.250 and curing
complete excluding the cost of formwork reinforcement for reinforced concrete work in
(D)column, piller ,posts and struts upto floor two level..
6 87.72 ITEM NO-6 Providing formwork of ordinary timber planking so as to give a rough
finish including shuttering centring and propping etc.height of propping and centring
below supporting floor to ceiling not exceeding 4 M and removal of the same for situ
reinforced concrete and plain concrete in (G) Column, piller,posts and struts (I) square, 315.69 Sqm
rectangular polygonal in plan.
7 13.77 ITEM NO-7 Providing and laying controlled cement concrete M.250 and curing
complete excluding the cost of form work and reinforcement for reinforced concrete
work in © slabs, landing, shelves,Balconies, lintal, beams, Griders and cantilever upto 4614.37 Cmt.
floor two level.
8 119.70 ITEM NO-8 Providing formwork of ordinary timber planking so as to give a rough
finish including centering shuttering strutting and propping etc. height of propping and
centering below supporting floor to ceiling not exceeding 4 M. and removal of the same
for in situ reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of 205.45 Sqm
Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding
9 19.82 ITEM NO-9 Providing and laying controlled cement concrete M.250 and curing
complete excluding the cost of form work and reinforcement for reinforced concrete
work in © slabs, landing, shelves,Balconies, lintal, beams, Griders and cantilever upto 4614.37 Cmt.
floor two level.
10 145.45 ITEM NO-10 Providing formwork of ordinary timber planking so as to give a rough
finish including shuttering centring and propping etc.height of propping and centring
below supporting floor to ceiling not exceeding 4 M and removal of the same for situ
reinforced concrete and plain concrete in (B) flat surfaces such as soffits of suspended
floor roof slabs landing and the like (2) Floors upto 200mm in thickness.
11 54.95 ITEM NO-11 Filling in foundation and plinth with murrum or selected soil in layers of
20cm. thickness including watering, ramming and consolidating etc. complete.
12 78.70 ITEM NO-12 Precast concrete block masonary (including quoin blocks jamb blocks
closer etc ) with solid concrete blocks of approved size made of cement concrete 1:3:6
mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate of 20mm and down grade ) in
foundation and plinth cement mortar 1:6
13 37.13 ITEM NO-13 Precast concrete block masonary in partition walls 10 cm thick with
solid blocks of approved size (including quion blocks jamb blocks closer etc) made of
C.C 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm and down grade)
14 5639.87 ITEM NO-14 Providing TMT Bar FE 500D reinforcement for R.C.C. work including
bending,binding and placing in position complete. 77.29 Kg.
15 395.40 ITEM NO-15 Providing 15mm thick cement plaster in single coat on brick/ concrete
walls for interier plastering upto floor two level and finished even and smooth ( III)
cement mortor 1:4 for all floors 161.20 Sqm
16 332.66 ITEM NO-16 Providing 20mm thick cement sanf face plasteron walls upto height
meter above ground level consisting of 12 mm thick backing coat of cm 1:3 and 8mm
thick finishing coat of cm 1:1 etc complete. 315.69 Sqm
17 20.67 ITEM NO-17 Providing and fixing aluminium work for doors, windows, ventilators
and partitions with extruded built up standard tubular sections/ appropriate Z sections
and other sections of approved make conforming to IS 733 and IS: 1285, fixing with
dash fasteners of required dia and size, including necessary fillng up the gaps at
junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically
wherever required including cleat angle, Aluminnium snap beading for glazing paneling,
C.P. brass/ stainless steel screws, all complete as per architectural drawings and the 4464.20 Sqm
directions of Engineer-in charge.(Glazing, paneling and dash fasteners to be paid for
separately):For fixed portion Powder coated aluminium (minimum thickness of powder
coating50 micron)
18 8.19 ITEM NO-18 Providing and fixing 35 mm thick shutters for Doors, windows and
clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including
anodized alluminium fixtures and fastenings including primer coat of approved quality
and two coats of oil painting etc, complete. (ii) Fully Panelled.
19 103.83 ITEM NO-19 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in
flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-
cement : 3-coarse sand ) finishing with flush pointing in white cement. 1120.36 Sqm
20 395.40 ITEM NO-20 Applying two coats of putty & two coats of primer of approved brand
and manufacture on new wall surface to give an even shade including thoroughly
brushing the surface free from mortar dropping and other foreign matter and sand 40.59 Sqm
papered smooth.
21 332.66 ITEM NO-21 Finishing wall with weather proof exterior emulsion paint on wall surface
(two coats) to give an required shape even shade after thoroughly brushing the surface to 120.26 Sqm
remove all dirt, and remains of loose powdered materials.etc complete
22 395.40 ITEM NO-22 Distempering (two coats) with oil bound wash-able distemper of
approved brand & manufacture & of required shade on wall surfaces to give an even
shade over & including a primary coat with alkali resistance primer of approved brand
after thoroughly brushing the surface free from mortar dropping & other foreign matter 107.92 Sqm
& also including perparing the surface even & smooth.
23 44.75 ITEM NO-23 Providing and Fixing Machine cut, free edges, machine polished
Telephonic black Granite stone slab 18 mm thick for Doors/Windows sill
and Jambs, platform, table top, Steps, partiotion granite cladding as per
design including half molded round both edge and round cutting for table 2918.00 Sqm
top and laid on cement mortar 1:3 ( 1 cement:3 coarse sand) jointed with grey
cement slurry including rubbing and polishing finishing etc complete base
NO-24 Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of
steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed
with white cement slurry 1592.40 Sqm
25 5.34 ITEM NO-25 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)
base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on
existing flooring by adhesive material including dismentaling of existing flooring and
jointed with color cement slurry including finised with flush pointing & cleaning the 1467.72 Sqm
surface etc.complete for antiskit
26 490.56 ITEM NO-26 Providing and fixing M.S. grill of required pattern to wooden frame s of
windows with M.S. flats at required spacings and alround square or round bars with
round headed bolts and nuts or by screws. (b) Ornamental grill 162.86 Kg.
27 123.45 ITEM NO-27 Carring out plinth treatment to post construction / existing structure by
spraying chemical solution for termite control treatment including labour and material
consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per
6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC
chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical 124.35 Sqm
emulsion appication at the rate of 5 Litre chemical / Sqm of
surface is recommended as per I.S
ITEM NO-28 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted
white including cutting holes in walls and making good the same but excluding fittings.
(C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size
ITEM NO-29 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working
pressure poluthene pipes of the following outside Dia. Low densidy, complete with
29 50.00 special falnge compression type fittings, wall clipsetc. including making good the wall 339.05 Rmt.
ceiling and floor.(G)110 mm
ITEM NO-30 Providing and fixing wsh down water closet (European type, W.C. Pan)
with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1
(1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A)
30 2.00 vitreous China Pattern :(i) in white colour incl. Providing and fixing 100 mm. size 'P' or 1809.34 No.
'S' trap for water closet squatting pan including jointing the trap with the pan and soil
pipe in cement mortar 1:1 (1 cement : 1 sand)
ITEM NO-31 Providing erecting and fixing double coated ISI water tank of required
31 3000.00 capacity each with all necessary fittings and connection etc. complete on terrace 3.95 Lit
ITEM NO-32 Constructing brick masonary chamber for under ground C.I. inspection
chamber and bends with bricks having crushing strength not less than 35 kg/cm2 in cm.
1:5 C.I. cover with frame (light duty) 455 mm x 455 mm. x 610 mm. internal
dimensions, total weight of cover with frame to be not less than 38kgs (weight of cover
23kg and wt. of frame 15 kg.) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand :
4 graded stone aggregates 20mm. size) foundation concrete 1:5:10 inside laster 15mm.
32 1.00 thickwith cementmortar 1:3 finished smooth with a floating coat of neat cement on walls 2932.93 No.
& bed concrete etc. complete.(i) Inside dimensions, 455mm. x 610mm. and 450 mm.
deep for single pipe line.
ITEM NO-33 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm
diameter with jali of the following nominal diameter of self cleansing design with C.I
33 5.00 scread down or hinged grating including the cost of cutting and making good the walls.. 586.27 No.
ITEM NO-34 Providing and fixing S.W. gully trap with C.I. grating brick masonry
chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with
34 5.00 standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type. 1246.92 No.
ITEM NO-35 Providing and laying (Two level or slopes) and jointing with stiff mixture
of cement mortar in proportion 1:1 salt glazed stone ware pipes following nominal
internal diametres including testing of pipes and joints etc. complete. 150 mm dia
ITEM NO-36 Providing and fixing cast iron spigot and socket soil,waste and
36 7.00 venulating pipes of the following nominal size. (B) 75mm. dia. 741.01 Rmt.
ITEM NO-37 Providing and fixing in position cowlvent to pipes (I) 75mm. dia.
ITEM NO-38 Providing and fixing screw down bib taps of following size : (B) Brass
38 7.00 chromium plated screw down bib tap (I) 15mm. dia. 186.83 No.
ITEM NO-39 Providing and fixing gun metal check or non - return fullway wheel
ITEM NO-40 Providing and fixing gun metal check or non - return fullway wheel
ITEM NO-41 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working
pressure poluthene pipes of the following outside Dia. Low densidy, complete with
41 30.00 special falnge compression type fittings, wall clipsetc. including making good the wall 82.85 Rmt.
ceiling and floor.(A) 20mm
ITEM NO-42 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working
pressure poluthene pipes of the following outside Dia. Low densidy, complete with
42 25.00 special falnge compression type fittings, wall clipsetc. including making good the wall 126.47 Rmt.
ceiling and floor.(A) 32mm
ITEM NO-43 Providing and fixing chromium plated brass half trun flush cock of
43 4.00 approved quality including fixing in pipe line etc. complete.(iii) 32mm dia. 275.76 No.
ITEM NO-44 Providing sock pit of 5.00 Cu.M. Volume including excavating and
filling brickbats with dry masonry work at top for 45cm. height including covering
44 1.00 the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. 3205.04 No.
complete as directed.
ITEM NO-45 Providing and fixing C.I. Mnhole cover 0.60m x 0.45m. size having
45 1.00 weight not less than 35Kgs. 958.17 No.
ITEM NO-46 Providing and fixing wash basin with single hole for pillar tap with C.I or
M.S. brackets painted white incl.cutting holes and making good the same incl.32mm
46 1.00 dia.C.P brass waste, and 15mm dia.capstan head pillar tap union . Vitreous china flat 1958.41 No.
back wash basin 550mm * 400mm size white in colour.
47 3.00 ITEM NO-47 Providing and fixing 100mm sand cast iron grating for gully, floor or
Nahni trap. 36.98 No.
48 2.00 ITEM NO-48 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of
C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm
nom.nal size brass ball valve with polythene float, C.P brass handle unions and
couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain 2370.39 No.
enamelled flush bend including cutting holes in walls and making good the same
connecting the flush bend with cistern and closet (overflow pipe to be measured and
paid for separately)(A) Vitreous China (I) In white colour
49 2.00 ITEM NO-49 Providing and fixing plastic seat and cover for wash down water closer
with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover.
50 1.00 ITEM NO-50 Providing and fixing C.P. brass waste for washbasin or sink. (A)
32mmdia. 67.91 No.
51 1.00 ITEM NO-51 Providing and fixing C.P. brass shower rose with 15mm or 20mm
inlet.(A) 100mm dia. Each 282.16 No.
52 1.00 ITEM NO-52 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior
glass Mounted on 6mm thick A.C. Sheet or plywood sheet and fixing to wooden pluge 859.41 No.
with C.P. brass screws and washers.
53 3.00 ITEM NO-53 Providing and fixing C.P. Brass towel rail comlete with C.P. brass
brackets fixed to wooden plugs with C.P. Brass scews.(B) 600mm x 20mm size.
54 56.00 ITEM NO-54 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm &
earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC
insulated multi strand copper wires upto max length of 10 mt, in below type of pipe
erected with 6A Tissino Type ISI marked flush type switch / bell push and accessories
erected on Metal / PVC/Wooden Box covered with 3 mm thick (Polycarbonate)
/Acrylic/Laminated sheet. with necessary Lamp holder/ceiling rose / H.D.Connector as 329.26 Point
directed. (a) with medium class Rigid PVC pipe and accessories erected flushed on
wall/ceiling complete
55 10.00 ITEM NO-55 Providing & erecting Approved make Ceiling Fan with double ball
bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having
3 blades aluminium body and blade sets having ornamental design shanks , canopy
erected with earthing. [ Make shall be approved by Engineer in Charge] 2311.89 Nos
56 5.00 ITEM NO-56 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.
Pipe down rod erected duly painted for fan complete with proper insulation without
leakage and earthing. 108.07 Mt
57 10.00 ITEM NO-57 Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in
RCC slab with Making the site as original. 43.43 Nos
58 10.00 ITEM NO-58 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded
to the RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. box
/ Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing. 108.07 Nos
59 10.00 ITEM NO-59 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S.
Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar. 98.98 Nos
60 10.00 ITEM NO-60 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or
Fan box. 18.18 Nos
61 20.00 ITEM NO-61 Supplying and erecting LED indoor fittings with LEDs of wattage
Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall
be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder
coated and high U.V. & corrosion resistance with diffuser with company mark/name
160V to 270V, Power Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 % 51.51 Nos
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.) (A) Tube Light with integral driver (iii) 18-
20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll
62 30.00 ITEM NO-62 Providing & erecting Switch board for Computer or electric apparatus
consisting of following modular type accessories mounted with PVC / Metallic
concealed/open box with single mounting base frame covered with textured/metallic
/white front plate,modules erected with necessary connections as directed
1 no. 6A/16A universal plug-switch combined. 1081.71 Nos
3 nos. 6A Switch
3 nos. 6A 5 pin Plug ,For Modular Type Accessories Cat. III
63 2.00 ITEM NO-63 Providing and erecting Sheet Steel powder coated MCB distribution
board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos.
of MCBs.(The DBs should be used of same company of MCB to be used) suitable for 1680.64 Nos
(A) single phase incoming and horizontal single phase outgoing (b) sheet steel double
door (IP-43),(v) 16 way
64 1.00 ITEM NO-64 Supplying & erecting approved make self-priming domestic monoblock
water pump with 1 H.P motor, suitable for operation on 230 volts, 50c/s. AC supply
with metallic flange, and M.S. impeller delivery and following discharge (b) 100 LPM
at 14 mtrs. head suitable for 25 mm dia. delivery Cat.III 9767.71 Nos
65 1.00 ITEM NO-65 Supplying & erecting in earthpit of minimum bore dia. 225mm size
approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS
3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of
mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250
Micron galvanising, connection terminal dia of 14 mm with constant ohmic value
surrounded by highly conductive compound with high charge dissipation suitable for
following type of applications with chamber and heavy duty cover (A)(approved make
OEM has to submit test certificate including value of earth resistance of installation duly
stamped and signed by agency and officer Incharge has to ensure the value of earthing
resistane mentioned in test Certificate) & having back filling compound of (B) Inner 5842.85 Nos
chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-
2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill
Compound :- Earthing compound should be capable to retain moisture for long time
Necessary test report must be submitted by Agency. [A] For electrical installation up to
Length of Pipe - 1 Mtr
Back filling compound - 1 Nos. of Bag of 15 Kgs.
66 120.00 ITEM NO-66 For Laying of Pipes on Stone Wall add to the following item rate per
ITEM NO-67 Conduits & Pipes
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size
complete to be erected on/in wall or ceiling erected with necessary PVC fittings &
67 Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in
approved manner as directed
68 70.00 ITEM NO-68 Providing & erecting PVC Corrugated Flexible Conduit with required
nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes.b) 25 mm
ITEM NO-69 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated
ISI marked stranded Copper conductor wire in following type of pipe to be erected
concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth continuity of following size (A) With
69 medium class Rigid PVC pipe and accessories
70.00 (a) 2 wire 1.5 sq. Mm 62.62 Mt
70.00 (b) 2 wire 2.5 sq. Mm 82.82 Mt
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
8 Rapar RFO Quater.pdf
RFO QUATER RAPAR 26.27.pdf
SCH-B TN-8.pdf
RFO QUARTER MAP TN-8.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .