Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
13 Mar 2023, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Swati Singh
Bakania Depot, Bharat Petroleum Corporation Limited
ok
11061
1000401560
Limited Tender
Works
Bakania Depot
15 Mar 2023
7 Mar 2023
13 Mar 2023
7 Mar 2023
13 Mar 2023
7 Mar 2023
8 Mar 2023 - 12 Mar 2023
BAKANIA DEPOT: PIPELINE WORKS FOR TANK CONVERSION TO BIODIESEL
SL Item Description Unit Qty
Supply of CS SORF 3"
FLG SO CS A105 RF 150# 80NB
Design-spec :ANSI B16.5
Mat:CARBON STEEL
Mat-spec :ASTM A105
1 Facing-flange:RAISED FACE EA
Finish-flange-facing:125 AARH
Pressure-designation-ASME-C:150
Service: HYDROCARBON PRODUCTS
Add-reqrmts: BPCL/R/AES-3591 REV.LATEST
Supply of CS SORF 4"
FLG SO CS A105 RF 150# 100NB
Name : FLANGE SLIP-ON
Design-spec :ANSI B16.5
Mat: CARBON STEEL
Mat-spec:ASTM A105
Facing-flange:RAISED FACE
Finish-flange-facing:125 AARH
Pressure-designation-ASME-C:150
Add-reqrmts:BPCL/R/AES-3591 REV.LATEST
Supply of CS SORF 6"
FLG SO CS A105 RF 150# 150NB
Design-spec : ANSI B16.5
Mat:CARBON STEEL
Mat-spec :ASTM A105
Facing-flange:RAISED FACE
Finish-flange-facing :125 AARH
Pressure-designation-ASME-C:
Add-reqrmts:BPCL/R/AES-3591 REV.LATEST
S&F BEND 150 # CS 3"
"Supplying,Fabrication,testing & commissioning of CS bends (as per mentioned
specifications and directed) suitable for 150 # API 5L Grade A/B Pipeline :
Fabrication including cutting; edge preparation; fitup; welding and erection of
bends on the pipeline over existing pedestals; overheads on racks and at all
4 elevations.This also includes alignment; cleaning and flushing by IND
water;hydrostatic testing at 15.8 kg/cm2;draining; drying; completing all such
works in all respects as per the specification; drawings and instruction of
Engineer in charge. 100 % DP testing of the welding shall be done in this item
.Radiography of the fiitting may be required which shall be paid seperately under
other item of BOQ. Payment shall be made on INCH DIA of the welding done on
the bend. Bend shall be supplied by contractor.
Size of the bend 80 mm"
S&F BEND 150 # CS 4" - 8"
4" - 16 nos. and 6" - 8 nos.
"Supplying,Fabrication,testing & commissioning of CS bends (as per mentioned
specifications and directed) suitable for 150 # API 5L Grade A/B Pipeline :
Fabrication including cutting; edge preparation; fitup; welding and erection of
bends on the pipeline over existing pedestals; overheads on racks and at all
elevations.This also includes alignment; cleaning and flushing by
water;hydrostatic testing at 15.8 kg/cm2;draining; drying; completing all such
works in all respects as per the specification; drawings and instruction of
Engineer in charge. 100 % DP testing of the welding shall be done in this item
.Radiography of the fiitting may be required which shall be paid seperately under
other item of BOQ. Payment shall be made on INCH DIA of the welding done on
the bend. Bend shall be supplied by contractor.
Size of the bend from 100 mm upto 200 mm
Supply, Fabrication and Fixing of CS 150 # REDUCER
"Supplying,Fabrication,testing & commissioning of CS Reducers (as per
mentioned specifications and directed) suitable for 150 # API 5L Grade A/B
Pipeline : Fabrication including cutting; edge preparation; fitup; welding and
erection of reducers on the pipeline over existing pedestals; overheads on racks
and at all elevations.This also includes alignment; cleaning and flushing by
water;hydrostatic testing at 15.8 kg/cm2;draining; drying; completing all such
works in all respects as per the specification; drawings and instruction of
Engineer in charge. 100 % DP testing of the welding shall be done in this item
.Radiography of the fiitting may be required which shall be paid seperately under
other item of BOQ. Payment shall be made on INCH DIA of the welding done on
the reducer. Reducer shall be supplied by contractor. Size of the reducer from
100 mm upto 200 mm"
Fabrication of PIPE AG API 3"
Fabrication, welding, testing & commissioning of above ground pipeline (API
5LGrade A/B supplied by BPCL as free issue material) :
Transporting of all piping items from owners storage point (within plant
premises) to work site ; fabrication including cutting,edge preparation,
fitup,welding and erection of above ground pipeline over existing pedestals;
overheads on racks and at all elevations ;connecting with equipment nozzles;
tapping for pressure gauges; sample connection etc.using recommended make /
size of welding electrode conforming to IS 814; This also includes alignment;
internal cleaning and flushing by water;hydrostatic testing at
Kg/cm2,rectification of any leakage & re-testing of pipelines to the specified
pressure ;draining; drying; completing all such works in all respects as per the
specification; drawings and instruction of Engineer in charge. The job may
require10 % radiography (which shall be paid seperately ).Job includes 100% DP
of total butt joints for above ground, the other considerations against the above
item are also to be noted for quoting & execution purpose,
1. Fabrication of pipeline branches (tapping by making puncher in the pipelines),
stubs, sampling points, vent points, drain points, are included in the above scope
but shall be paid seperately under other item of BOQ of inline bends
,reducers,Tees supplied as free issue materials by BPCL are included in the scope
of work but shall be paid seperately under other item of BOQ
3 Painting of pipeline as per BPCL Painting Manual shall be paid seperately. for
flushing/Hydrotesting would be arranged by contractor at his own cost.
5. Scope of work also includes reconcilation of BPCL supplied piping materials
and transportation of surplus free issue materials to Owner's storage yard within
the plant premises.
6. Payment under this item would be made in INCH METRE DIA of pipeline
excluding the lengths of bends/elbows/reducers/valves/TEE's. Welding
procedure should conform to ASME SEC IX/API 1104 as applicable.
API 5L GRADE A/B Size of pipe upto 80 NB
Fabrication of PIPE AG API 4-8"
Fabrication, welding, testing & commissioning of above ground pipeline (API
5LGrade A/B supplied by BPCL as free issue material) :
Transporting of all piping items from owners storage point (within plant
premises) to work site ; fabrication including cutting,edge preparation,
fitup,welding and erection of above ground pipeline over existing pedestals;
overheads on racks and at all elevations ;connecting with equipment nozzles;
tapping for pressure gauges; sample connection etc.using recommended make /
size of welding electrode conforming to IS 814; This also includes alignment;
internal cleaning and flushing by water;hydrostatic testing at
Kg/cm2,rectification of any leakage & re-testing of pipelines to the specified
pressure ;draining; drying; completing all such works in all respects as per the
specification; drawings and instruction of Engineer in charge. The job may
require10 % radiography (which shall be paid seperately ).Job includes 100% DP
of total butt joints for above ground, the other considerations against the above
8 item are also to be noted for quoting & execution purpose, INM
1. Fabrication of pipeline branches (tapping by making puncher in the pipelines),
stubs, sampling points, vent points, drain points, are included in the above scope
but shall be paid seperately under other item of BOQ of inline bends
,reducers,Tees supplied as free issue materials by BPCL are included in the scope
of work but shall be paid seperately under other item of BOQ
3 Painting of pipeline as per BPCL Painting Manual shall be paid seperately.
4.Water for flushing/Hydrotesting would be arranged by contractor at his own
5. Scope of work also includes reconcilation of BPCL supplied piping materials
and transportation of surplus free issue materials to Owner's storage yard within
the plant premises.
6. Payment under this item would be made in INCH METRE DIA of pipeline
excluding the lengths of bends/elbows/reducers/valves/TEE's.
Welding procedure should conform to ASME SEC IX/API 1104 as applicable. API
5L GRADE A/B Size of pipe from 100 NB to 200 NB
Flange Welding SORF WELD 150# < 3"
"Fabrication, welding of the supplied SORF(free issue material by BPCL), 150# on
the pipelines / fittings using approved make / size of welding electrode
confirming to IS 814; with three or more runs of weld on the outside for sizes
more than 150 NB and 2 runs for sizes less than 150 NB and one or more runs
9 inside(depending on the size of the flange) including cutting and beveling ends as IND
necessary; cleaning of internal / external surfaces where welding is to be done;
grinding of welds; etc.; as directed. Welding procedure should conform to ASME
SEC IX /API 1104. Payment shall be made on the INCH DIA of the flange to be
Size of Flange SORF 150 # upto 80 NB
Flange Welding SORF WELD 150# 4" - 8"
"Fabrication, welding of the supplied SORF(free issue material by BPCL), 150# on
the pipelines / fittings using approved make / size of welding electrode
confirming to IS 814; with three or more runs of weld on the outside for sizes
more than 150 NB and 2 runs for sizes less than 150 NB and one or more runs
10 inside(depending on the size of the flange) including cutting and beveling ends as IND
necessary; cleaning of internal / external surfaces where welding is to be done;
grinding of welds; etc.; as directed. Welding procedure should conform to ASME
SEC IX /API 1104. Payment shall be made on the INCH DIA of the flange to be
Size of Flange SORF 150 # from100 NB to 200 NB"
MAKING FLANGE JOINTS CAF GASKET < 3"
"Making flanged joints /fixing blind flanges class 150 lb including supplying and
fixing 3mm thick compressed asbestos fibre gasket conforming to IS 2712; hi-
tensile bolts & nuts; double-washers,igreasing etc.; complete(hi-tensile bolts and
nuts should be of recommended make like UMBRAKO;TVS;TATA or
equivalent(after prior approval from BPCL)), all complete including necessary
tools and tackles as directed by the Engineer-in-charge. Size of Flange SORF 150 #
MAKING FLANGE JOINTS CAF GASKET 4" - 8"
"Making flanged joints /fixing blind flanges class 150 lb including supplying and
fixing 3mm thick compressed asbestos fibre gasket conforming to IS 2712; hi-
tensile bolts & nuts; double-washers,igreasing etc.; complete(hi-tensile bolts and
nuts should be of recommended make like UMBRAKO;TVS;TATA or
equivalent(after prior approval from BPCL)), all complete including necessary
tools and tackles as directed by the Engineer-in-charge. Size of Flange SORF 150 #
from 100 NB to 200 NB"
Supply and Fixing NRV 3"
"Supplying & Fixing 150 # CS non return valve swing type complete of approved
makes as per enclosed specification including supplying of 3mm CAF gasket;
studs / bolts (ASTM A 193 Gr B7) & nuts ( ASTM 194 Gr 2H) of recommended
brands like UNBRAKO,TVS;TATA or equivalent make(after prior approval from
BPCL), double washers ; wherever required as per directions of Engineer-in-
charge.. The valve to be Hydotested at 15.8 Kg/sqm (seat)as per technical
specifications prior to installation and contractor shall submit Valid Test
Certificates from the manufacturer of the valve.
Size of the valve upto 150 mm . Rate to be quoted per INCH DIA of the valve.
Specifications required :API 6 D without monogram /BS
Recommended manufacturer list : Bharat Heavy Electricals Ltd,KSB Pumps
Ltd,Neco Schubert & Salzer Ltd,Steel Strong (I) Pvt.Ltd,J.K. Industries Ltd,Oswal
Industries Ltd. or equivalent (after prior approval from BPCL)"
HIRING OF CRANE HIRE FARANA
HIRING OF CRANE(FARANA) WITH DRIVER- RATE PER HOUR FOR SHIFTING OF
EQUIPMENTS//MATERIALS, ETC . (FUEL and OTHER CONSUMABLES/RESOURCES
IN CONTRACTOR'S SCOPE)
PIPELINE FLANGE JOINT COPPER JUMPER 25 X
Supplying, fabrication & fixing of copper jumpers for providing electrical
15 continuity of the pipeline across the flange joint; made from copper flats EA
Rates shall be same for all sizes of flanges joints of all pipeline sizes.
Rate to be quoted accordingly.
25mm X 3mm Copper Flat"
Fixing of Ball VALVE 150# CAF 3"
"Fixing of CS Gate Valve/PBBV/Plug Valve/Ball
valve/NRV/Strainer/Butterfly/Globe Valve using CAF gasket
Shifting of all types of valves from owner's storage points to contractors stores /
worksite and installation of valves flanged for 150 lbs. rating including assembly
of valves accessories if any and supplying and fixing of CAF gasket suitable for
16 POL/FF as per the case; bolts & nuts of approved IS brands like UNBRAKO; TVS; IND
TATA or equivalent (after prior approval from BPCL); double washers ; wherever
required as per drawings; specification and directions of Engineer-in-charge. The
valve is to be hydrotested at 15.8 kg/sq cm or 10.5 Kg/sq cm as directed by
Engineer in charge prior to installation :
Rate to be quoted in INCH DIA for the valve erection.
Size of Valve 150 # upto 80 NB "
Fixing of Ball VALVE 150# CAF 4"
"Fixing of CS Gate Valve/PBBV/Plug Valve/Ball
valve/NRV/Strainer/Butterfly/Globe Valve using CAF gasket
Shifting of all types of valves from owner's storage points to contractors stores /
worksite and installation of valves flanged for 150 lbs. rating including assembly
of valves accessories if any and supplying and fixing of CAF gasket suitable for
17 POL/FF as per the case; bolts & nuts of approved IS brands like UNBRAKO; TVS; IND
TATA or equivalent (after prior approval from BPCL); double washers ; wherever
required as per drawings; specification and directions of Engineer-in-charge. The
valve is to be hydrotested at 15.8 kg/sq cm or 10.5 Kg/sq cm as directed by
Engineer in charge prior to installation :
Rate to be quoted in INCH DIA for the valve erection.
Size of Valve 150 # from 100 NB to 200 NB"
WELDING BENDS/REDUCERS/FITTINGS SUPPLIED BY BPCL 150 #
"Welding, testing & commissioning of BPCL supplied 150 #
bends,Tee's,Reducers,Mitre Bends/Reducers(made by contractor under seperate
item) and other inline fittings :
Shifting of all fitting items from owners storage point to work site ; fabrication
including cutting; edge preparation; fitup; welding and erection of above fittings
on the pipeline over existing pedastals; overheads on racks and at all
elevations.This also includes ;alignment; cleaning and flushing by water
completing all such works in all respects as per the specification; drawings and
instruction of Engineer in charge.
100 % DP testing of the welding shall be done in this item .Radiography of the
fiitting may be required which shall be paid seperately under other item of BOQ.
Hydrotesting of the bend at the specified test pressure shall be done during the
pipeline testing for which no seperate payment shall be made by BPCL. Payment
shall be made on INCH DIA of the welding done on all end joints of the fitting.
Welding joint done on the fitting in IND"
Surface preparation with Manual Scrapping
"Heavy Scrapping and surface preparation upto SSPC SP2 or St.2.(External
surface of Pipe Line as specified). Manual Cleaning shall be done by steel wire
19 brushes, emery/sand papers etc as instructed by Engineer-in-charge. Removing M2
oil, dust, grease,mill scale and moisture and making the surface dry including all
materials,consumables,labour; scaffolding; equipments etc. complete. Rate shall
be paid in M2 basis of the scrapped surface"
Primer Zn Silicate
"Supplying and applying primer on the prepared surface including all labour;
scaffolding; consumables; equipments; primer etc. complete as per specifications
20 (primer shall be applied within 8 hours of surface preparation). Paint shall be as M2
per attached list of BPCL recommended manufacturers.
One coat of Inorganic zinc silicate primer at 65 micron. Rate shall be paid in M2
basis of the painted surface excluding the cost of scaffolding"
"Supplying and applying intermediate coat on the prepared pipe surface
including all labour; scaffolding; consumables; equipments; primer etc. complete
21 as per specifications (primer shall be applied within 8 hours of surface M2
preparation), Paint shall be as per attached list of BPCL recommended
manufacturers. One coat of tie coat epoxy coating of 75 micron. Rate shall be
paid in M2 basis of the painted surface excluding the cost of scaffolding"
"Supplying and applying finish paints on the prepared pipe surface including all
labour; scaffolding; consumables; equipments; primer etc. complete as per
specifications. Paint shall be as per attached list of BPCL recommended
Finish Coat : One coat of acrylic aliphatic polyurethane at 40 microns/coat in
Aluminium shade. Rate shall be paid in M2 basis of the painted surface excluding
the cost of scaffolding"
Dismantling of AG pipeline upto 3"
"Dismantling CS/SS/GI pipelines laid aboveground including gas cutting,
23 removing flanges, fittings, bolts & nuts and transporting pipelines / associated INM
fittings and stacking them at location directed by site engineer.
Size of pipe upto 80 NB "
Dismantling of AG pipeline 4" - 8"
"Dismantling CS/SS/GI pipelines laid aboveground including gas cutting,
24 removing flanges, fittings, bolts & nuts and transporting pipelines / associated INM
fittings and stacking them at location directed by site engineer .
Size of pipe from 100 NB to 200 NB"
Dismantling of valves
"Dismantling of online valves of dia as specified of 150# rating by removing,
disconnecting nuts, bolts, washers, jumpers, gaskets etc. from its existing
25 position carefully without damaging the valve and to shift the same to BPCL IND
nominated place inside the Plant all complete as directed by Site Engineer. The
job includes for all types of valves, NRVs, Hammer blinds and MOVs etc.
Size of the valve upto 150 NB"
Support structure Steel
"Supply, fabrication and erection in position; bolted and/or welded structural
steel works at all levels; including all built-up sections /compound sections made
out of rolled sections and / or plates intrusses; rafters; purlins; wind ties;
coloumns; portals; platforms; staircases; (excluding chequered plates, swing
ladders, foundation boltsand gratings) ladders; stoppers; brackets sag rods;
supports forequipment and accessories; hand railings posts cutting to required
size as per approved drawings; straightening if required bolting/ welding of joints
(including sealing the joints of the box sections with continuouswelding
wherever specified) finishing edges by grinding; fixing in lineand level with
temporary staging and removal of same after erection; grouting with ordinary
grout or non-shrink grout as specified; including preparation of detailed
fabrication drawings, cost of painting as specified below, complete in all respect
as directed by Engineer-in-charge. Cost of nutbolts to be borne by contractor.
26 1. All structural steel shall conform to IS-2062 & IS-808 and of SAIL/TISCO/IISCO/ KG
JINDAL/ ESSAR/ VIZAG STEEL or equivalent make with prior approval from BPCL
2. The structure may be Pre-fabricated with bolting arrangements bymaking
necessary holes, shot blasting (SA 2.5) and painting except final coat,which will
be carried out after completion of the erection works. Min. hot works will be
allowed at site. It is vendors responsibility to verify the actual measurements at
site before making the bolting shedule.
3. PAINTING SPECIFICATIONS :
The cost includes surface preparation by grit/shot blasting to SA 2.5finish of
swedish standard SIS 05
After surafce preparation one coate of inrganic zinc silicate @ 65 microns.
Intermediate Coat:
One coat of epoxy high built micaceous iron oxide @ 100 microns.
Top Finish Coat :
2 coats of acrylic aliphatic polyeurethene @ 30 microns per coat.
Total DFT 225 microns minimum.
The rate includes the cost of materials, consumables, labour, tools and
plants,transportation, loading, unloading, machinery, safety requirents,
incidental charges, if any, all complete."
"Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto
plinth level in foundations,drains,fillings, non-suspended floors, pavements &
ramps or any other works etc.including the cost ofposition cement concrete of
27 specified grade including the cost ofcentring and shuttering, tamping, ramming, M3
vibrating,curing, in anyshape,position,thickness and finishing the top surface
rough or smooth,etc. all complete as per directions of Engineer-in-charge. - All
work upto plinth level
1:2:4 (1 Cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)"
Supplying and laying in postion RCC of specified nominal mix using 20mm
anddown size graded crushed stone aggregate for columns, beams slabs and
soffits, staircases, lintels etc.of all typesincluding placing of concrete,supplying
pockets,openings, recesses,rendering if reqd. to give a smooth and even surface
28 etc. all complete(excluding the cost of reinforcement, but including the cost of M3
centringand shuttering)for all heights above plinth level in any shape,position,
thickness etc. all complete as specified and directed. Onlysteel shuttering will be
used so as to obtain required finish. Theheight of shuttering shall not exceed
m per lift of concrete.: 1:1.5:3 (1 cement: 1.5 coarse sand: 3 grade stone
aggregate 20 mm nominal size)
MANHOLE HOZ TK<200KL
"Fabrication and erection of 600 mm dia shell Manhole including all accessories:8
mm thick neck ring,10 mm thick manhole cover with 16 mm dia round bar
handles,10 mm thick bolting flange with 3 mm thickness CAF Oil gasket and
nuts,bolts of TVS,UNBRAKO,TATA or equivalent (after prior approval from BPCL)
make. Steel plates shall be supplied by BPCL. Job also to include providing
staircase (if required) fabricated out of structural steel to access the tank
interiors.Structural steel used for fabrication of manhole ladder shall be paid
seperately under other item of BOQ. Drawing reference number S/CE/104
Tank size :100 KL/200 KL"
Steel Reinforcement
Supplying and placing HYSD steel reinforcement of Grade 500 (TMT) conforming
to IS 1786 in position for RCC worksincluding straightening, cutting, bending,
placing in position andbinding with 16 SWG black soft annealed binding wire at
everyintersection, supplying and placing appropriate cover block all
completeincluding cleaning and making it free from oil, grease etc. complete-for
all heights and depths and conforming to relevant IS code (Make: SAIL,TATA,
JSW, ESSAR, VIZAG STEEL or approved equivalent make conforming to IS code)
MANHOLE HOZ TK<70KL
"Fabrication and erection of 600 mm dia shell Manhole including all accessories:8
mm thick neck ring,10 mm thick manhole cover with 16 mm dia round bar
handles,10 mm thick bolting flange with 3 mm thickness CAF Oil gasket and
nuts,bolts of TVS,UNBRAKO,TATA or equivalent (after prior approval from BPCL)
make. Steel plates shall be supplied by BPCL. Job also to include providing
staircase (if required) fabricated out of structural steel to access the tank
interiors.Structural steel used for fabrication of manhole ladder shall be paid
seperately under other item of BOQ. Drawing reference number S/CE/104
Tank size :45 KL/70 KL"
1) The work is to be done as per the instructions of Engineer In charge.
2) All the consumables required for executing the jobs mentioned in the scope of work including various tools,
PPE (Boiler Suit any colour except Blue and Red) etc. come in vendor’s scope.
3) Vendor shall ensure that all the electrical equipment used are FLP In nature further any tools used shall be
NON-SPARKING type only. Under no circumstances Non FLP equipment/ Equipment with exposed wires/
Non FLP JBs shall be allowed inside the depot for use.
4) Utmost care to be taken while excavation for buried cables.
5) The work involves working in licensed premises hence worker shall ensure to take all safety precautions as
prescribed by the engineering. Safety of the contract workman shall be the responsibility of contractor. All
applicable safety norms of the corporation shall be complied with.
6) Work permits have to be taken for each job. Daily renewal of the same shall be done. Work permits shall
be issued for normal working hours i.e. from 08:30 hours to 17:00 hours. Any extension of timing shall be
job specific and separately taken.
7) Housekeeping in the workplace shall be of highest standards. Used materials shall not be allowed to
accumulate/lie around the workplace.
8) Used Welding rods should not be left at the site and should be disposed properly at the end of each day
9) Wrapping, coating material should also be collected and placed properly instead of lying here and there.
10) FLP integrity of Cables /Equipment used for cleaning equipment/ hydro jet / air blower/ any similar
electrical equipment shall be ensured by Vendor.
11) The contractor has to communicate / give safety talks before start of job, detailing the work involved. Dos
and Don’ts of the work assigned, safety working procedures, actions in emergency etc.
12) Contractor shall abide by all the directives related to jobs undertaken issued by BPCL officer in charge time
13) The work involves working in a running installation hence party shall visit the site before quoting and shall
satisfy himself with work quantum and safety requirements.
14) Match box, lighters, mobile phones, flash cameras, gutkha etc. are not allowed inside the installation
15) No work will be allowed while rake is standing inside the depot premises as the work site is railway siding
16) All the contract workmen engaged shall wear the personal protective equipment e.g., safety belt, safety
shoe, photo identity passes, uniform etc.
17) All workers shall have undergone medical health checkup carried out not less than 6 months from job
starting date in line to factory rules and shall possess health card, valid ID card, Police verifications.
18) The Vendor shall be fully responsible for the verification of credentials and the reliability of everyone
deployed by it in BPCL premises.
19) Vendor needs to submit undertaking form for the workers as per the format provide the M/s BPCL before
deploying them for work.
20) The contractor shall hold the company harmless and indemnified from and against all claims, costs and
charges for which the company shall be liable under the Workmen's Compensation Act, 1923, and latest
amendments therefore, both in respect of personal injuries (within the meaning of the said Act) caused to
the labor of the contractor, or of the sub-contractor, if any, arising out of or occasioned during the currency
of this agreement through the acts or commission whether due to the negligence of the contractor or sub-
contractor. The contractor will also indemnify the company in respect of any cost, charges or expenses
arising out of claim or proceeding and in respect of any award or compensation of damages arising thereof.
21) In case the contractor fails to perform the job, the Corporation reserves the right to make alternate
arrangements to perform the same and the loss/damage incurred if any by the Corporation on account of
the same shall be deducted from the amount payable to Contractor by the Corporation
22) BPCL will provide only water and electricity. All other material, consumables, non- consumables,
equipment, scaffolding, transportation requirements etc. required for completion of the job will be under
the scope of the contractor.
23) The contractor shall in all respects comply with all statutory requirements/provisions as applicable under
labor act 1970, payment of wages act, gratuity act minimum wages act, PF act ESI act etc. and will be solely
responsible for all claims and responsibilities arising out of any dispute their under. Further the contractor
shall always keep BPCL indemnified against any liability under the provision of the carious statutory acts.
BPCL shall not be responsible for any complaints from statutory authority.
24) Corporation reserves right to deduct penalty/deductions from the presented bills for bad performance or
non-execution or delay in execution of jobs as per scope of work.
25) Cost incurred on account of Police verification/ ID card / uniform / safety shoes / helmet / PPE / Insurance
is under vendor’s scope. No amount will be reimbursed by the corporation for the same.
26) Workmen are required to follow proper discipline inside depot premises which includes proper Uniform,
PPEs, ID cards failing which entry into depot premises will be restricted
27) Payment shall be released after successful completion of Work. Running Bill may be executed after
successful completion of one area
28) General working time in Depot is from 0830 hrs. to 1700 hrs. No additional payment outside tender will be
done for job done on holidays/ Sundays, extended hours working.
29) Contract will remain valid for the period of ONE year with the provision of extension for one more year if
30) It will be the responsibility of the contractor to depute adequate manpower/ supervisor/ tools and
trolley/vehicle for getting the job done in time.
31) The cost incurred for shifting of material is purely under vendor’s scope. No additional payment will be
done for shifting of the material.
32) Contract will be terminated with one month notice in advance if services/ attendance of contractor
workmen is found to be unsatisfactory or contractor is found to be not maintaining statutory requirement
as per governments various laws as applicable in respect of PF, ESI etc., or not following Depot’s safety and
security norms.
33) The contractor will have to abide by all statutory provisions under contract such as labor act 1970, payment
of wages act, gratuity act minimum wages act, PF act ESI act and will be solely responsible for all claims and
responsibilities arising out of any dispute there under.
34) In addition to standard agreement the party will have to sign an indemnity bond/ undertaking on Rs. 100/-
stamp paper as per out draft format available with corporation for perusal for intending tenders.
35) The job is purely contractual in nature and all the relevant labor laws are to be satisfied by contractor. The
payment would be done at the end of each month (once in month). In case of unsatisfactory performance,
the corporation reserves the right to terminate the contact at any time without assigning any reasons.
36) No escalation in price will be entertained during the contract period
37) BPCL reserve the right to cancel the Tender/CRFQ/RFQ at any point of Time
38) Vendor shall insist their Bank for issuance of SFMS Bank Guarantee for faster payments. Vendors shall
provide BPCL’s Bank Account No. & IFSC Code (Details given below) to their Bank as beneficiary at the time
of application for Bank Guarantee in favour of BPCL. Issuing bank shall issue the bank guarantee & send
SFMS message to BPCL’s bank conforming the authenticity of bank guarantee who in turn shall send the
confirmation to BPCL. Vendor should ensure the following for issue of E-bank guarantee:
a. The issuing bank is on SFMS platform
b. SFMS message type used is 760 COV and SFMS delivery report/Message copy is sen along with
c. For BG amendment, message type 767COV is to be used.
d. SFMS ontains following details:
i. Beneficiary’s Bank name: ICICI Bank
ii. IFSC Code: ICIC0000393
iii. BPCL’s Customer ID: BPCL583493800
e. BG issuing bank should send the BG Issuance advice through the SFMS to BPCL’s designated
Banker: ICICI Bank, Backbay Branch, Mumbai (IFSC:ICIC0000393)
f. BG issuance advice should mention applicable Unique Identifier Code (UIC) in rowl field number
7037 of SFMS Delivery Report.
i. BPCL Location: Kharghar, Navi Mumbai
ii. Head Office: Ballard Estate
iii. UIC: BPCL583493800
g. The original BG should be submitted along with the print out of SFMS delivery report from the BG
issuing bank branch
h. SFMS BG will help in faster verification of BGs and prompt release of payments to vendors.
39) EARNEST MONEY DEPOSIT:
(Applicable only for works costing Rs.50000/- and above in value. However, in case of parties registered
within the Corporation EMD may not be insisted upon).
In the case of open tenders, the tenderer shall be required to submit along with his quotation a Bank Draft
in favor of Bharat Petroleum Corporation Ltd. For a sum equivalent to 5% of the total tendered value of
works as earnest money deposit, subject to a maximum of Rs.25000/-.
Permissible forms of EMD are Bank Drafts drawn in favor of BPCL or Bank Guarantee executed by any
Scheduled Bank.
The earnest money deposit shall be returned to the unsuccessful tenderer/s within one month after due
date for opening of the tender. The Earnest money deposit of the successful tenderer will be retained till
the commencement of the work. Thereafter the tenderer may opt to adjust the earnest money deposit
against Bank Guarantee of equivalent amount. No interest will be payable on earnest money deposit.
EXECUTION OF AGREEMENT
40) PERFORMANCE BANK GUARANTEE:
(Applicable for works costing more than 10 lacs.)
In the case of any tender costing more than 10 lacs without GST/ applicable taxes, vendor has an option to
select between:
a. Submitting a Performance Bank Guarantee upfront for 10 % of total value of contract
b. or Submitting separate Bank Guarantees based on 10% of each Running Bill.
failing which the contract will stand cancelled.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
11061.pdf
pdf • 0.14 MB
BUDGETDOC_11061.pdf
pdf • 0.65 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .