SPECIAL REPAIR AND CERTAIN MINOR WORKS TO CERTAIN BLDG UNDER AGE B/R1 AND AGE B/RII AT MIL STN BHUJ UNDER GE (A) BHUJ

Amount

Dismantling wall tiling including cement mortar bedding (but not backing) remoiving serviceable tiles to store and rubbish off the premices & M&L for glazed ceramic tiles, coloured tiles, 450mm x 300mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

Dismantling floor, hearth tiling of any description and in any position including cement mortar bedding (but not backing) and M&L for non skid ceramic coloured tiles square / rectangular area of each tile exc 0.06 sqm but not exc 0.11 sqm and 6 - 7 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth tiling of any description and in any position including cement mortar bedding (but not backing) and M&L for non skid ceramic joint free coloured matt finish tiles square / rectangular area of each tile exc 0.11 sqm but not exc 0.18 sqm and 6 - 7 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling wall tiling of any description and in any position including cement mortar bedding (but not backing) and M&L for non skid ceramic coloured matt finish tiles square / rectangular area of each tile exc 0.11 sqm but not exc 0.18 sqm and 6 - 7 mm thick as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L 25mm thick PCC of type B-1, 1:2:4 (20mm graded stone aggregate) for padding

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls / celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster and disposing off the rubbish off the premises of cantonment complete all as specified and directed.

M & L for 10 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in one layers ie. Ist layer of 10 mm thick rendering in CM 1:4 ( this layer mixed with water proofing compound as per manufacturer's instructions) finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "supply only")

M & L for rendering 5 mm thick in C M 1:3 on ceiling finished even and smooth without using extra cement and applying 3 coats of white wash on ceiling surfaces after preparation of the newly plastered surfaces of ceiling complete all as specified and directed.

Supply only water proofing compound (ISI Mark) complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement including preparation of newly plastered sufaces of walls & applying two coat of distemper oil- emulsion , white or tinted over a coat of primer surfaces of wall complete all as specified and directed.

S & F in repairs ISI marked Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position from the opening of size not exceeding 1.50 sqm each with shutter i.e. without taking off shutter from the frames complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position from the opening of size exceeding 1.50 sqm but not exceeding 4 sqm each with shutter i.e. without taking off shutter from the frames complete all as specified and directed.

Taking down shutters of any description and in any position of size exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and directed.

M & L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. in brick walls and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S & F anodised Aluminium alloy sections sliding windows with frames Series-C (20mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, shutters with tinted glass 5mm thick and stainless steel wire cloth 0.35mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.

M &L mild steel bars conforming to Fe 290 Gde E-165 as in guard bars or similar works including welding etc complete all as specified.

S & F 35 mm thick factory made IInd class hard wood (not less than Hollock wood) glazed and skelton shutters open rebated and prepare to receive glass / gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc {size of members of shutters as specified in clause 8.24 (a) of section 8 of SSR - I} supplied and fitted to chowkat complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in the opening as per the specifications and drawing mentioned in section 8 of SSR-II complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet 5 mm thickness to be fitted in M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per the specifications and drawing mentioned in section 8 of SSR-II complete all as specified and directed.

S&F 2nd class hard wood factory made plain framed panelled door shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS:1003 (Part I), Klin seasoned and chemically pressure treated.

S & F 150 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F aluminum alloy handles 150 mm size cast type anodized complete all as specified and directed.

S&F in repair Double action spring hinges brass, with phosphor bronze wire spring, bright polished 100mm, complete

S&F aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S & F butt hinges 100 mm long extruded aluminium alloy with stainless steel hinge pin, anodised and fixed type B-22 complete all as specified and directed.

S & F butt hinges 100 mm long mild steel medium weight cold rolled complete all as specified and directed.

S & F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete with provision of lime concrete bedding including & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed. Make: Hindware/Parryware/Cera 1st Quality

S & F in repair PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity white with inlet, ball valve, float and handle including brackets complete all as specified and directed. Make: Hindware/Parryware/Cera 1st Quality

S & F in repair sinks matt finish anti scratch stainless steel without drainage board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. Make: Prayag/BlueStar (Silvershine)/Nirali(Glossy Finish)

S & F in repair vitreous china Corner wash basin, round, white, flat back , size 400mmx400mmx125mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe complete all as specified and directed. Make: Hindware/Parryware/Cera 1st Quality

S & F in repair vitreous china wash basin, white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated fancy type pillar tap 15mm bore, screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

Dismantiling of stone slabs and tiles of any discription or any thickness in floors, aprons, laid bedded and pointed in any mortar and M & L Granite slab work 18 to 20 mm thick in cooking platforms and like over 15mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade including cutting recess opening for the sink portion and embedding complete all as specified and directed.

Dismantiling of stone slabs and tiles of any discription or any thickness in skirting, dado etc. laid bedded and pointed in any mortar and M & L Granite slab work 18 to 20 mm thick in skirting/dado and like over 10mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade complete all as specified and directed.

M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar works complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in sub base and finishing top surface even and fair complete all as specified and directed.

S & F 60 mm thick, machine made, Ist quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles of triangular / zigzag / hexagonal / I in shape or shape and designe as approved with grey cement and pigment conforming to IS-15658-2006, M-35 grade laid over and including 25 mm thick sand cushioning and the voids shall also be filled with fine sand complete all as specified and directed.

Dismantling structural steel work of any description and in any position including doors, gates but excluding framed truss etc and M & L for mild steel framed work [Fe-410-W (grade 250) quality A] as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other coverings, doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Dismantling plain or corrugated A C or steel sheeting any guage, of any description and in any position as in roof coverings and S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with L or J hooks complete all as specified and directed.

S & 15mm dia 2-in-1 bib tap with angle valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions. (conforming to JAINKO Cat no. BCJ-4 or its equivalen make)

S&F health faucet spray type jet with brass jet, chromium plated, and 1.5m long PVC flexible pipe complete all as specified and directed.

S&F of PVC cabinet size 650 x 400mm, comprising of looking glass, space for bath soap, shampoo, tooth brush and paste, handle towel rail complete allas specified and as approved of any fo floowing makes :- CERA / PARRYWARE/CLASSIC or equivalent complete all as specified and directed.

S & F in repair tubular towel rail of aluminium anodised , 20 mm dia, D type, 60 CM long between flanges complete all as specified and directed.

S & F in repair for swivel shower rose size 150mm of PTMT, any colour, for foxong with 15mm dia pipe, (minium weight 40gm) with and including Shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (min Weight 40gm) complete all as specified and directed.

S & F in replacement PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified

S & F in repair PVC (SWR) floor/Nahani trap 75 mm bore long body type, plain with grating doom including jointing with solvent cement complete all as specified and directed.

S & F in repair Bib taps cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15 mm bore of GI Pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repair Stop valves concealed type, fancy type chromium plated ISI marked cast copper alloy screwed down high pressure for 15 mm bore of GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified and directed.

S & F in repairs 15mm dia angle valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions.

Taking down eaves gutters and rain water/RCC pipes of size 110 mm of any pattern, of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) and S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed.

Taking down eaves gutters and rain water/RCC pipes of size 75 mm of any pattern, of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) and S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed.

S & F in repairs PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed.

S & F in repairs PVC (SWR) Junction, single, (single T) equal or unequal with access door, 75 mm bore, complete all as specified and directed.

S & F PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

Taking up or down existing unserviceable mild steel water tubing and connections 20 mm dia, any grade, of any description or in any position including fittings and S & F (concealed / open) 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Taking up or down existing unserviceable mild steel water tubing and connections 25 mm dia, any grade, of any description or in any position including fittings and S & F (concealed / open) 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 to ends of landings, steps, cills sunshades, shelves lintels etc

M&L for cutting holes or through PCC block / RCC wall built in CM and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required, superficial area exc 150 sqcm but n.exc 400 sqcm

M & L for Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M & L for Preparation of old decorated surface by complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean and applying 1 mm thick putty all over and preparation of surface for further treatment and applying two coat of Weather proof Exterior Emulsion paint complete all as specified and directed.

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

M & L for Preparation of old decorated surface by complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean and applying1mm thick putty allround and preparation of surface for further treatment and applying two coat of distemper oil emulsion paint white or tinted complete all as specified and directed.

M & L for Preparation of old painted surface of wood and wood based material any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Providing & applying rising damp-proof costing system with single component ready to use damp- proof coating Roff Hydamp : 1. Surface preparation thoroughly brush and clean all laltance, loose particles such as dirt, grease, mortar droppings , release agents, efflorescence, bird droppings , etc. All large volds or hollow portions must be removed and re-plastered , Non - moving cracks having width upto 5 mm must be filled with polymer based brack filler. 2. APPLICATION : Apply the first coat of Dr fixit Damp guard Classic with a paint brush directly on the prepared surfaces by mixing (1 part base : 1 part hardner : 1 part of water). Allow to dry for a minimum 2-3 hrs . Apply on e part of DAMP GUARD mixed chemical and 2 parts of OPC whte cement / Birla putty and make the putty , apply putty on the entire surface area. Allow it to dry for at least 3-4 hours . Apply the Final coat of Dr Fixit Damp guard classic on the entire surface and allow the surface to air cure 48 hours proceeds for Paint

M & L for Preparation of new painted surface of wood and wood based material any description and in any position over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for Preparation of new painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of PCC of any description and in any position (reinforced) in any position in beams, columns, chajjas and similar situations and disposing rubbish off the premises of cantonment and M & L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) as in sub base/sunken floor filling and finishing top surface even and fair complete all as specified and direccted.

S & F in repair Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or Stainless steel wire stapples complete all as specified and directed.

M&L Rendering 10 mm thick of CM 1:4 on concrete roof surfaces is to be finished even and smooth without using extra cement with mixing water proofing compound @3% by weight. complete all as directed.

S&F of 20 mm dia stainless steel curtain rod along with necessary brackets/supports as approved by Engr-in-Charge.

M & L for for special treatment of sunken portion of WCs and Bath room as per following stages: Note: Flat Plane area shall be measured and paid. Stage 1:- Demolition of WC including lime concrete and cement concrete etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc. Stage 2:- Providing 10 mm thick plaster in CM 1:3 with chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd Stage 3:- Applying Dr Fixit Primseal primer or STP Ltd and allow to dry for 8 hours under touch dry condition Stage 4:- Applying two coats of water proofing decorative elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP(The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufactutrer instruction Stage 5:- Filling the Same Portion with plain concrete 1:4:8 Type D-2 (This item of PCC will be measured and paid for separately as M & L under appropriate item of Sch 'A') Stage 6:- Making holes in wall and fixing 600 mm long 40 mm dia GI spout for draining the surplus water if any.

M&L for roof treatment with APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over tack coat of industrial bitumin 85/25 @ 1.20 kg / sqm incl cleaning surface and applying two coats of aluminium paint on roof or vertical surfaces complete all as specified and directed.

Dismantiling of stone slabs and tiles of any discription or any thickness in floors, aprons etc. laid bedded and pointed in any mortar and M & L kota stone work 20 mm thick in floors steps, cooking platforms and like over 15mm thick cement mortar 1:6 pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

Dismantiling of stone slabs and tiles of any discription or any thickness in skirting, dado etc. laid bedded and pointed in any mortar and M & L for kota stone work 20 mm thick in skirting/dado and like over 10mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

M&L for removal of existing loose damage concretye, dust, oil, paint, grease, etc from structural member like roof slab, beam, column, chajja, etc exposed fully if any corroded steel in the repair area and remove all the scale and corrosion deposite and applying Dr fixit rust removal and Epoxy Zinc Primer over the cleaned steel bars if and pour the mixed Dr fixit micro concrete into a watertight shuttering after primed by one coat of Dr fixit Epoxy bonding. Thickness or depth of an area n. exc 10cm and all as per manufature instruction as specified. (Note - The rate included S&F of addition reinforcement bars if any required.)

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil as specified & as directed

M&L Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed

Removing excavated material n exc 50m depositing where directed at a level n. exc 1.5 m above the starting point.

M&L returning filling including spreading levelling watering and well ramming in layers n exc 25cm in any soft and loose soil.

M&L, RCC Type B1 1:2:4 (20 mm graded aggregate) for foundation including rafts, footings, foundation beams;, plinth beams; bases for columns, etc, etc all as specified and as directed

M&L, Flat Form work to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams: and similar work; vertical or to batter all as specified & all as directed

M&L, RCC in Type B1 1:2:4 (20 mm graded aggregate) for Columns, pillars, piers, posts & struts etc all as specified and as directed

M&L, Form work to sides of pillars posts, struts, piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape all as specified & as directed

M&L, RCC in Type B1 1:2:4 (20 mm graded aggregate) for Beams, cantilevers, bresummers, lintels over 1.5 m span etc all as specified and as directed

M&L, Flat Form work to sides and soffits of floors or roof beams, beam haunchings, girderrs, bressum-mers, lintels cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc all as specified & all as directed

M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming all as specified & as directed

M&L TMT bars 5 mm dia & over upto & including 10 mm dia in stirrups, spacers & binders etc all as specified & as directed

M&L for (Type B1 1:1.5:3),20mm Graded Aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L,Formwork to rough finish surface of flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)complete all as specified and directed.

M&L Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide for rough finished surface of concrete complete all as specified and directed by Engr-in-charge.

M&L for Pre-cast cement concrete block masonry (Type C1, 1:3:6, 20mm aggregate) with solid blocks, exc. 10cm in width and setting in mortar, complete all as specified and directed.

Providing 40mm thick damp proofing course 1:2:4 type B-0 including necessary form work including WPC.

M&L for 15mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4 finished even and smooth without using extra cement mixed with water proofing compound (Note :- WPC shall be measured & paid separately)

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

M&L, applying 3 coats white washing on wall with preparing new plastered surfaces all as specified & as directed by Engineer-in-Charge

M&L, applying 3 coats white washing on ceilling with preparing new plastered surfaces all as specified & as directed by Engineer-in-Charge

Filling under floor with excavated soil spreading and levelling in layers not exc 25cm deep including watering and well ramming.

M&L, Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc all as specified and directed by engineer- in- charge

M & Lfor 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) including necessary form work as in sub base of flooring, complete all as specified.

S&F Non skid coloured plain/printed glazed tiles of size 300 x 300 x 6mm to 7 mm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick rendering in CM 1:6

S&F coloured plain/printed glazed tiles of size 300 x 450 x 7 mm, on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick rendering in CM 1:4

M&L for 25mm thick PCC (1:2:4) type B0using 12.5mm graded stone agg as in Top surfaces finished even and fair complete all as specified and directed.

M&L for moulded grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with suitable aluminum frame of size 37x19x2mm and all as secified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples all as specified

S&F for butt hinges 100mm size medium weight stainless steel .

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.

S&F 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe 32mm dia

S&F soap dish of 1mm thick stainless steel box type fixed with screws. (conforming to JAINKO Cat no. SDJ-1 or equivalent)

S & F vitreous china wash basin, white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated fancy type pillar tap 15mm bore, screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

S & F vitreous china wash down water closet pan (pedestal pattern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete light colour including fixing bolts complete fixed in repairs

S&F in repairs vitreous china water closet (squatting pan), orissa patern size 580 x 440mm white with integral, foot rests and lime bedding making good to floors complete

S & F vitreous china urinals spreader bowl type flat back size 465 x 355 x 265 mm white including providing and fixing plugs bedding urinal against wall CM 1:2 securing urinal with 60mm long brass screws pointing arround urinal back in cement, fixing grating and union for discharge pipe complete

S&F 15mm dia Bib taps cast copper alloy, with Chromiun plated crutch or butterfly handle screwed down,for iron pipe or brass ferule complete all as specified and directed.

S & F 15mm dia angle valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions. (conforming to JAINKO Cat no. AVJ-5 or equivalent)

S & F 15mm dia 2-in-1 bib tap with angle valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions. (conforming to JAINKO Cat no. BCJ-4 or its equivalen make)

S&F shower rose 125 mm dia of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipe complete all as specified and directed. (conforming to JAINKO Cat no. FSJ-6 or its equivalen make)

S&F health faucet spray type jet with brass jet, chromium plated, and 1.5m long PVC flexible pipe complete all as specified and directed.

S & F 15mm size PVC connections with PTMT nuts of length 450 mm.

M&L 32mm dia Low density poly ethylene pipes(LDPE) of pressure rating 6 Kgf/cm2 fixed complete to wall, ceiling or in floors etc

M&L 40mm dia Low density poly ethylene pipes(LDPE) of pressure rating 6 Kgf/cm2 fixed complete to wall, ceiling or in floors etc

M&L cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as directed.

S&F for Rotational moulded polyethylene water storage tank of 1000 liter capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 to ends of landings, steps, cills sunshades, shelves lintels etc

M&L for cutting holes or through PCC block / RCC wall built in CM and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required, superficial area exc 150 sqcm but n.exc 400 sqcm

S&F for 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F for 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 75 mm bore PVC (SWR) pipes Type B ISI marked single socketed in any length with rubber ring joints laid on wall fixed complete all as specified and directed

S&F 75mm dia PVC (SWR) bends any radius with access door.

S&F 110mm dia PVC (SWR) bends any radius with access door.

S&F for PVC (SWR) reducers 110mm bore

S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F for PVC (SWR) vent cowl 75 mm bore

S&F 25 mm thick Kota Stone as partiton including necessary cutting work to vertical surfaces complete all as directed.

S&F for 20mm bore UPVC pipes of pressure rating 10 kgf/cm2 laid in trenches of any description or in any position including fittings complete all as specified and directed

S&F for 25mm bore UPVC pipes of pressure rating 10 kgf/cm2 laid in trenches of any description or in any position including fittings complete all as specified and directed

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- ills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite .

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.

M&L 75mm thick PCC (1:3:6) type C-I (Using 20mm graded stone aggregate) as in plinth protection laid in panels incl bitumen filling in joints and finish the top surfaces even and smooth without using extra cement complete all as specified.

M&L Salt-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed as specified

M&L Cement concrete type 1:4:8 type D2 concrete bed to drain pipe of dia 150 mm including packing under and hounching against the sides of pipes after they are laid and tested

M&L for PCC 1:2:4 type B1 using 20mm size graded stone aggregate as in benching of man holes including making drains and necessary form work finishing even and smooth with using extra cement all as specified and directed

M&L PCC in 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping including weathering round or chamfered and necessary form work required all as specified and directed by engineer in charge

M & L Pre cast reinforced cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) set in cement mortar 1:4 for man holes cover slab all as specified and directed by engineer charge

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring for One light/fan/exhaust fan/buzzer point controlled by one,one way switch with using 1.5 Sqmm (nominal sectional area) multi stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including concealed PVC conduit of adequate size fixed in to the surface and including sunken type metal flush box suitable for holding modular frame and switchs of required size and modules including single core multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. iii) The quoted rates shall be deemed to be inclusive for provision of sunken box suitable for modular fitting including base plate ,frame os suitable module specfied by Enginner-in-charge. One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

One 3 pin socket out let 5 amp point on the (same board) with other switches.

All as per item No. 2 here-in-before but with 2.5sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

S&F Modular switch 1 way 6A,1 module, one way, 230 volts AC circuit complete all as specified and directed.

S & F Bell push, modular type 5 AMP AC 230 Volt single pole complete as specified.

S&F socket outlet five pin, 5 Amps, modular type, 230 volts AC circuit complete all as specified and directed.

S&F socket outlet combination, multipurpose, three pin, 15 Amps & three pin 5 Amps controlled by one switch , modular type, 230 volts AC circuit complete all as specified and directed.

S&F Modular switch 1 way 16A,1 module, one way, 230 volts AC circuit complete all as specified and directed.

S & F buzzer, ding dong AC 230 Volt single pole complete as specified.

S&F modular fan regulator electronic, step type, suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified and directed.

S & F in replacement elegantly industrial general purpose box type luminaire, 1x20 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with electronic ballast, spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable for LED/CFL lamp fitting complete all as specified and directed by Engr-in-charge

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by accepting officer

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for vertical type MCB DB TPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by accepting officer

Supply and fixing MCB TPN, 63 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed :-

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 2.5 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

S&F modular switch single pole230 / 250 volts one way 5 Amps.

S&F socket outlet five pin, 5 Amps,modular type, 230 volts AC circuit complete all as specified and directed.

S & F Exhaust fan ventilator DX 250mm sweep 36W ideal for mounting on glass/wooden window 220/230 Volts AC steel body and connecting up to the ceiling rose with flexible three core copper conductor of size 23/.0076 including provision to fix the ventiliar fan to the glass/wooden window/ by providing duitable fixing arrangement, farse nut, bolts etc complete all as specified and directed.

Demoiltion of damaged masonary and Removal of debris for the damaged compound wall built in cement mortar complete

Supply only, chain link fencing of MS galvanized mesh of size complete all as specicfiedand directed

Fixing only chain link fencing incliding fline wires, any mesh , size and type fixed of any line wire & necessary bolts to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separetly.

M&L for mild steel works as in angle iron,MS Pipes / flat iron fencing post, fixed independently ; posts and struts in fencing.; flat iron fillets, balusters, nosing to steps, wind ties etc., and similar work including cutting tops to shape as directed, drilling holes, notching for wire , etc conforming to Fe 290 Gde E-165 , including painting all steel surfaces alround complete all as specified and directed Note : Shape and Size of the post / other items , shall be all as directed by the Engineer -in-charge as specifically approved.

Supply only mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut , exceeding 15 cm but not exceeding 40 mm long with and dia of neck 11 to 15mm complete all as specified and directed 5 to 10 mm dia. of shank complete all as specified and directed

S&F of Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete

M& L for Pre-cast cement concrete block masonry of Type B1 (1:2:4) 20mm graded aggregates set and jointed in Cement mortar 1:4 of solid blocks, exc. 10 cm in width and setting in mortar, complete

M& L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:4 complete

Preparation of newly steel surfaces of any description and in any position exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

zotabrothers