Providing new tables and chairs for Council Hall in Vijayawada Municipal Corporation.

Cost, supply and making of curve-shape tables of different sizes for the Council Hall, with the table height maintained at 30 inches from FFL, table -top width of 18 inches and lengths as finalized by the departmental authorities. The table top, both side vertical end panels, and floor-level footrest shall be made of 18 mm thick plywood. The front vertical curved face of the table and the canopy provided over the table top, with dimensions of approximately (6" + 4",) shall be made of 9 mm thick plywood. Plywood shall be of Green Eco Tech / Century / equivalent approved make.Providing necessary vertical supports and framework for the table top using 18 mm thick plywood, as required for adequate strength and stability. All external visible surfaces, including the table front face, table top, side panels and canopy, shall be finished with 1.0 mm thick decorative laminate. All internal surfaces shall be finished with 0.80 mm thick laminate.The laminate shall be of Greenlam / Century / Merino / equivalent approved make. The complete table shall be securely fixed to the floor using suitable ‘L’ clamps.The rate shall include the cost of all materials, transportation and conveyance to site, skilled and unskilled labour, adhesives, screws, nails, fasteners, necessary hardware, cutting, shaping, bending, fabrication, fixing, finishing and all other incidental works required for completing the item in all respects, as per the approved design, specifications and as directed by the departmental authorities.

Cost and supply of ‘S’ shape chair, including fabrication of the chair frame using heavy-gauge 25 mm dia MS round pipe, with seat and backrest made of 12 mm thick Starned make plywood like centuray/green ply /equivalent Providing and fixing 1 mm thick foam-backed rexine cloth over the seat and backrest, including finishing, and providing and fixing 2 Nos. wooden handles to the MS frame. The MS frame shall be thoroughly cleaned and provided with one coat of zinc primer and two coats of enamel spray paint. Providing and fixing PVC bushes and all other necessary materials, labour, tools and accessories required for the complete finished item, as per the existing design/specifications, S.S. specifications, and as directed by the departmental authorities.

Repairing of old ‘S’ shape chair, including replacement of existing old wooden handles and worn-out rexine upholstery; providing and fixing new foam and 1 mm thick rexine cloth for the seat and backrest, including finishing and fixing of 2 Nos. wooden handles to the MS frame. The MS frame shall be thoroughly wire-brushed/cleaned and provided with one coat of zinc primer and two coats of enamel spray paint. Providing and fixing PVC bushes and all other necessary materials, labour, tools and accessories required for complete finishing of the item, all as per S.S. specifications and as directed by the departmental authorities.