SITC of Feeder Pillar and Replacement of faulty cables at Bhuj Airport.

Amount

Supply of XLPE insulated and PVC sheathed Aluminum armoured LT cable of 1.1 KV grade confirming to IS 7098, Part-I 1988 with up to date amendments of following size and confirming to technical specifications.

3½ X 50 sq.mm

4 X 25 sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 25 sq. mm (28mm)

3½ X 50 sq. mm (35mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering. and refilling the trench etc as required.

Upto 35 sq. mm

Above 35 sq mm and upto 95 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground , sand cushioning, protective covering and refilling the trench etc but excluding excavation as required.

Upto 35 sq. mm

Above 35 sq mm and upto 95 sqmm

Excavation of the cable trenches in hard rock not exceeding 1.5 meters in width and lift up to 1.5 meters , including getting out the excavated soil and disposal of excavated soil as directed.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35 sq. mm

Above 35 sq mm and upto 95 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.

Above 35 sq mm and upto 95 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.

Above 35 sqmm and upto 95 sq mm (clamped with 25 X 3 mm MS flat clamp

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Providing and laying non pressure NP2 Class (light duty) 250 mm R.C.C Pipes with collers jointed with stiff mixture of cement morter in proportion of 1:2 (1 Cement : 2 Sand) including cutting / breaking PCC/Bituminous area upto suitable depth and 400 mm width and remaking the same as good as previous etc. complete as required.

Constructing masonry Chamber 900 mm x 900 mm x 1000 mm inside, with 50 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) , RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate) 20 mm nominal size with RCC Cover i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate) 40 mm nominal size and inside plastering with cement mortar 1:4 (1 cement : 4 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

SITC of Feeder Pillar

Supplying, installation, testing & commissioning of cubical, outdoor type , dust and vermin proof and having IP 54 protection Feeder Pillar suitable for 415V, 3 phase, 4 wire 50 Hz AC supply system fabricated in totally enclosed and compartmentalized design from CRCA sheet steel of 2 mm thick for load bearing members & 1.6 mm thick for doors i/c cleaning & finishing complete with powder coating in approved shade, TPN Aluminium Alloy bus bars of high conductivity, DMC/ SMC bus bar supports, suitable angle /channels frame in the bottom i/c civil masonry foundation works as per site requirement etc. complete as required as per technical sppecifications i/c providing following switch gears and accessories : Incomer 63 Amp 4 pole ( 36 KA , lcs = 100% lcu) MCCB - 1No. Bus Bars 100 Amp. TPN bus bars of aluminium alloy of suitable size as per technical specifications. Outgoings A) 63 Amp. 4 Pole, 10 KA, (lcs=100%lcu) MCCBs- 2 no. B) Spare Compartment - 1 no. with DIN Rail Channel and wiring provision. Instruments RYB indication lamps for incomer MCCB- 1 Set with protection fuses for control wiring , 15 A industrial socket -1 no.

Supply of Recessed mounting 2' x 2' LED panel Luminaire, 36W, IP 20, CRCA deep-drawn housing suitable for 600 mm X 600 mm modular ceiling complete as per technical specifications. Make : Bajaj (BZRSQL 36L LED GX D CW SD) or Equivalent.

Yash Energy Pvt. Ltd