RUNWAY MAINTENANCE LIKE GRASS CUTTING SGA PLOUGHING GRILLS SIGN BOARDS ETC AND OTHER MISC WORKS AT AF STN BHUJ

Amount

M&L for grass cutting by mechanical bush cutter around airfield lights, sign boards along with drian including deploying of labour complete all as directed by Engineer in Charge.

M&L for ploughing of soft ground arrester in the pattern prescribed by the Engineer in Charge using including deploying of tractor with jungle jim/plougher and a driver and cutting of grass around runway and taxi track all as directed by Engineer in Charge.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed by the Engr-in-Charge.

S & F for framed work such as grills, gratings etc, framed guard bars, railings and similar work conforming to Fe 290. Gde-E-165 complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10CM in width and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Rough excavation n ecx 1.5 m deep and getting out any type of soil complete all as specified.

Removing excavated material exc 500m but n exc 1.5km and deposited where directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc 30cm thick, watering,ramming/rolling and finishing to required size, shape etc n exc 1.5m high from base (Note : lead for earth 500m)

Demolition of precast concrete block walling of any description, built in cement mortar

M & L for providing precast cement concrete block masonry 1:5:8 with solid blocks exc 10 cm in width, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified.

Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided for and removing outside MD land.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.

All as item No above but 5 mm to 8 mm dia as in stirrups, spacers and binders etc. -ditto-

M&L RCC (M 30 Design mix) in beams, cantilevers,lintels etc complete all as specified.

M&L RCC (M 30 Design mix) in roof slab supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on stone masonry surfaces finished even and smooth without using extra cement.

M&L for surface dressing n.exc 15 cm deep in soft/loose soil including cleaning away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots and trees n.exc 30 cm girth and removing rubbish upto a distance of 50 m outside the periphery of the area complete.

Supply & Fixing of Distance To Go Marker 2 Nos (1220mm X 1220 mm) made of compressed aluminum sheet of 4mm thick blackodised on one side where the compressed aluminum sheet and the marking of the number/letter are of red retro reflective film on black background and shall comply with ADM part 6 is supported in a frame made up of aluminum extrusion embeded 60cm below GL with PCC 1:4:8 type D-2 and 10cm above ground level including making ncecessary earth works etc complete all as specified and as directed by the EIC.

Sanjay Enterprise

Khodiyar Construction

M/s Bombay Novelty Stores

ASHAPURA CONTRACTOR

M/s Pal Builders

GPR Construction Co.

SARASWATI CONSTRUCTION

GOPI CONSTRUCTION