Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.6 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹43.6 L+₹1.3 L (3.11%)Rejected-Finance | L2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | L3₹45.0 L+₹2.7 L (6.31%)Rejected-Finance GANDHI NAGARI AIRPORT ROAD BHUJ KUTCH PIN 370 001 GUJARAT | KACHCHH | GUJARAT | 370001 | L3 | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
25 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHUJ
GE (AF) BHUJ ,KHAVDA ROAD, BHUJ GUJARAT-370001
WELCOME MAINT OF CERTAIN SMQs INCLUDING ELECTRIC WK AND OTHER MISC REPAIR AT AF STN BHUJ
2023_MES_630189_1
8705/V/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BHUJ
AS PER NOTICE OF TENDER
8 documents required · 8 mandatory
₹500
Yes
GE (AF) BHUJ
₹99,000
Yes
11 Jan 2024
28 Nov 2023
27 Dec 2023
28 Nov 2023
25 Dec 2023
12 Dec 2023
29 Nov 2023 - 12 Dec 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land.
M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough for laying finishes complete all as specified and directed
M & L for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 15 mm thick screed bed (1:4) etc complete.
M&L for 450x350 x7 mm thick glazed ceramic tiles (Digital pattern) including highlighter colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles as directed at site
M&L 20mm thick granite (of any type) work (table rubbed and polished) over cooking platforms, WHB stand and like laid over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment of match with shade of granite, including demolition/taking down of existing granite complete all as specified and directed.
Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n exc 1.5 sqm
Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm
Taking down Shutters of any description n exc 1 sq. m each
All as per Item 10.00 above but exc 1 sq. M and n exc 2 sq. M each.
All as per Item 10.00 above but exc 2 sq. M each
M&L 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
M&L Pressed steel frames for doors size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed
S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.
Resecuring only Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each
Resecuring without taking down Chowkhats or frames not exc. 1.5 sq. m each
All as per Item 18.00 above but with shutters (without taking off shutters from the frames)
Resecuring without taking downChowkhats or frames exc 1.5 sq. M but n exc 4 sq. m each
All as per Item 20.00 above but with shutters (without taking off shutters from the frame)
Resecuring or easing & adjusting without taking down Shutters of any description n exc 1 sq. m each .
All as per Item 22.00 above, but exc 1 sq. M and n exc 2 sq. M each.
All as per Item 22.00 above but exc 2 sq. M each.
Repair to 1st class hard wood Pieces, small let in for making good where hinges, etc. have been removed from chowkhats or frames, joinery, etc.including painting or oiling to match, if required
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. And hoisting if required reconnecting and re-fixing in position Ecx 250 & n exc 500 Ltr. (Cleaning repairing, etc. Measured separately)
All as per Item 26.00 above but Ecx 500 & n exc 1000 Ltr tank complete.
S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.
S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
S&F in repairs 20/22mm dia fancy type PVC coated best quality Drophery rods for curtains fixed to walls with screws including brackets,clamps, Bracket ,End ball , rounded block (coated with brown/cherry/Golden colour best quality as of approved pattern and shade complete approved by GE. (Note - Length of curtain rod shall be measured and paid for as one unit. Quoted rate is deemed to include for provision of a pair of brackets and clamps per unit length)
Preparation of new or previously treated wood surfaces applying two coat of synthetic enamel paint over a coat of pink primer of any description over 10cm width girth not otherwise described.
Preparation of Old or previously treated wood surfaces applying one coat of synthetic enamel paint of any description over 10cm width girth not otherwise described.
Preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed.
M&L for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle, 75mm long tower bolt and anodised aluminum fittings such as stay, 75mm long Butt hinges glazing with 5 mm thick tinted sheet glass fixed with Solar control film 25 micron reflective type (gareware sun control or equivalent) and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately
S&F anodized aluminium ventilator fixed type with frames aluminium section size 63X38X1.20mm thick including fly proofing ventilator fixing with standard rubber gasket locking arrangements aluminium beadings & joining cleats, suitable butt hinges, handle and tower bolts for fixing complete all as specified and 5.5 mm thick tinted glass with Solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed.
Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm
Repairing/ Taking down Aluminium window/doors of any description area exc 1.00Sqm n. Exc 2.00 Sqm repairing/ retightening screws, aluminium clips and securing top & bottom rails using MS 10mm bar having both sides threading incl bolting, fixing of new rubber padding, Aluminium snap bidding, glazing clips and re-fixing resuring in same opening completed all specified and as directed by Engineer-in-Charge
Taking up or down following size of steel tubing and connections including removal to store for reuse or credit to contractor Note : (a) The rates apply to pipes above or below ground only in repairs and alterations. (b) 'The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing,where required.
(a) 15mm bore of pipe
(b) 20mm bore of pipe
(c) 25mm bore of pipe
S&F CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes: (SDR-13.5 of Make : Astral or equivalent of Supreme / Finolex)
(a) 15mm bore of pipe
(b) 20mm nominal dia of pipes
(c) 25mm nominal dia of pipes
S&F tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors of following size :-
(a)15mm bore
(b)20mm bore
(c)25mm bore of pipe
S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of following sizes
(a) 15mm dia bore
(b) 20mm dia bore
(c)25mm dia bore
S&F in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 500 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) (Make of tank - Sintex cat No CCWS 0050-02-TLW or equivqalent of makes given in Appendix 'B'to PS, Make of ball valve - Prayag Cat No - 153 or equivalent in Polytuff as approved by GE)
All as per item 56.00 above but capacity 750 ltrs (Make of tank- Sintex cat No CCWS 0075-01-TLW or equivqalent of makes given in Appendix 'B'to PS)
All as per item 56.00 above but capacity 1000 ltrs (Make of tank - Sintex cat No CCWS 0100-01-TLW or equivqalent of makes given in Appendix 'B'to PS)
S&F in repairs 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) (Make- Prayag Cat No - 153 or equivalent in Polytuff as approved by GE)
S&F in repairs 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) (Make- Prayag Cat No - 153 or equivalent in Polytuff as approved by GE)
S&F in repairs 15mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) (Make- Prayag Cat No - 153 or equivalent in Polytuff as approved by GE)
Dismantling of cast iron/PVC /AC or reinforced concrete pipes jointed in cement mortar/solvent cement etc. and taking out of from trenches/walls, (including all fittings), with spigot and socket ends and lead joints including burning out joints if required all as directed by Engr-in-charge following bore of pipe
a) 100/110mm dia of pipes
b) 75mm dia of pipe
S&F PVC (SWR) single socketed in any length with rubber ring joints sealed with approved adhesive and fixed on wall with MS brackets or in floor complete all as specified and directed.
(a) 110mm dia of pipe
(b)75mm dia of pipe
S&F of PVC junction single 'Tee' equal provided with access door / with door opening, ISI marked, IS-14735, jointed with solvent cement of following sizes :- (Make : Astral/ Finolex / Supreme or equivalent of the makes given in Appendix 'B' to Particular Specifications)
(a) 110mm dia of pipe
(b) 75mm dia of pipe
S&F of PVC bend equal of any radius provided with access door, ISI marked, IS-14735, jointed with solvent cement for 75mm size pipes.
S&F of PVC bend equal of any radius provided with access door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes.
S&F PVC (SWR) bends any radius of 110 mm dia
S&F PVC (SWR) bends any radius of 75 mm dia
S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door
All as per Item 75.00 above all as per item above above but 75mm bore
S&F of PVC socket reducer 110mmx75mm size, ISI marked, IS-14735, jointed with solvent cement.(Make : Astral / Finolex / Supreme or equivalent of the makes given in Appendix 'B' to Particular Specifications)
S&F of PVC cowl for 75mm size pipes, ISI marked, IS-14735, jointed with solvent cement.(Make : Astral / Finolex / Supreme or equivalent of the makes given in Appendix 'B' to Particular Specifications)
S&F of PVC cowl for 110 mm size pipes, ISI marked, IS-14735, jointed with solvent cement.(Make : Astral / Finolex / Supreme or equivalent of the makes given in Appendix 'B' to Particular Specifications)
S&F in repairs of PVC gully trap 150x110mm,setting and jointing with solvent cement including dismantling of surrounding concrete and fixing of gully trap with and including cement sand mortar 1:3 complete.(Make : Astral type 'B' pipes or equivalent of Finolex / Supreme or equivalent of the makes given in Appendix 'B' to Particular Specifications)
S&F grating doom 100mm dia of PTMT (Minimum weight 25gms complete all as specified and directed.
S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe, all as specified
Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity exc. 250 liters and n.exc. 500 ltrs including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks.
All as per item 83.00 above but of capacity exc 500 liters and n.exc. 1000 liters
All as per item 83.00 above but of capacity exc 500 liters and n.exc. 1000 liters
S&F in repairs for bib taps, fancy type, cast copper alloy with crutch handle, chromium plated, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore.
S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed by EIC .
S&F in repairs angle cock / stop valve fancy type 15 mm dia, cast copper alloy, chromium plated, high pressure with crutch handle screwed both ends for iron pipe or for unions.
S&F PVC connection 450mm long with check nut for wash hand basin/ flushing cistern etc complete.
S&F in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe .
S&F in repair shower rose chromium plated with swivel joints of size 150mm cast copper alloy CP, fancy type with CP neck 9" long made to shape complete all as specified and as directed.
S&F in repair PVC flexible waste pipe (heavy duty) 32/40 mm for fixing to WHB/Kitchen sink with long screwed shanks and fly nut flanged.
S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, white colour, low level with inlet, ball valve, float, Flush pipe of 32 mm dia and handle including brackets incl PVC connection with CP brass nuts on both sides . Make-Cera/ Hindware/Champion.
S&F in repairs soap dish any type fixed to plugs with chromium plated brass screws.
S&F CP towel rail, 20mm dia, D type,60cm long between flanges complete all as approved and directed by the EIC
S&F in repairs Vitreous China wash basin white flat back size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, all as spd.
S&F in repair water closet white vitreous china ware orisa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic WC).
S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding, flushing cistern and flush pipe) complete connected to p trap complete.
S&F in repairs jet spray to EWC with PVC nozzle, PVC fish plates and PVC fish plates and PVCflexible pipe etc complite.
S&F in repairs for grating square 150mmx150mm size of stainless steel
S&F pillar tap mixer cast copper alloy fancy type with capastan headsm chromium plated screwed down high pressure with or without lettered “HOT or “COLD” with long screwed shanks and fly nuts, screwed for iron pipe.
S&F in repair fancy CP wall mixer (3 in 1 type) with provision for both overhead shower and hand shower with 115mm long bend pipe and wall flange complete all as specified and directed.
S&F in repair CP Health faucet with 1.5m tube and hook complete.
S&F PVC shelf wall corner size 230 mm with all fittings/brackets complete all as specified and as directed by Engineer-in-Charge.
S&F PVC Bathroom Cabinet with mirror complete all as specified and as directed by Engr-in-charge
S&F in repairs chromium plated towel ring complete all as specified & directed.
S&F in repairs stainless steel plate rack made out of 1mm thick stainless steel sheet, overall minimum size 60cm x 90cm and for 6 plates as approved by GE.
S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.
S&F 18mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works
All as per item 110.00 above but 18mm thick plain PVC celuka ply .
All as per item 110.00 above but 12mm thick plain PVC celuka ply .
All as per item 110.00 above but 05mm thick plain PVC celuka ply .
S&F PVC coated basket for kitchen drawers of required size and including sliding channels.
S&F 15 mm bore Bib cock long nose with wall flange and aerator complete.
S&F 15 mm bore Pillar tap with aerator complete.
S&F 100mm size extruded, brass handle fabricated type polished complete all as specified and directed by Engineer-in-Charge.
S&F 75mm size butt hinges,cast brass with mild steel hinge pin bright polished complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster any description on brick , block or stone walls etc including raking down joints hacking for key secrubing down with water etc any description
M&L for rendering on concrete surfaces 15mm thick in two layers first coat 15mm thick in CM 1:6 , finished even and fair.
M&L for preparation of newly plastered or unplastered washing, rubbing down and stopping of distemper anf painted surfaces of walls and applying two coat of distemper oil emulsion ( as approved by GE) complete all as specified and directed.
M&L for preparation of scapped surfaces of wall any description by washing, rubbing down and appliying 3mm thick wall care putty complete all as specified and directed.
M&L for preparation of Old plastered or unplastered washing, rubbing down and stopping of distemper anf painted surfaces of walls and applying one coat of distemper oil emulsion ( as approved by GE) complete all as specified and directed.
M&L for preparation of Old plastered or unplastered washing, rubbing down and stopping of distemper anf painted surfaces of walls and applying two coat of distemper oil emulsion ( as approved by GE) complete all as specified and directed.
M&L for preparation of Old plastered or unplastered washing, rubbing down and stopping of distemper anf painted surfaces of Ceiling and applying one coat of white wash complete all as specified and directed.
M&L for preparation of Old plastered or unplastered washing, rubbing down and stopping of distemper and painted surfaces of Ceiling and applying one coat of distemper oil emulsion as approved by GE) complete all as specified and directed.
M&L for preparation of plastered or unplastered old decorated external surfaces of walls and applying one coat of exterior emulsion paint ( as approved by GE) complete all as specified and directed.
M&L for preparation of plastered or unplastered old decorated external surfaces of walls and applying two coats of exterior emulsion paint ( as approved by GE) complete all as specified and directed.
M&L for writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high
Supply and fixing in repairs tank top cover (lid) white with locking arrangement complete of make : Sintex suitable for 500 ltr capacity all as specified and directed.
Supply and fixing in repairs tank top cover (lid) white with locking arrangement complete of make : Sintex suitable for 750 ltr capacity all as specified and directed.
Pulling down the existing U/S wires of any type from concealed wiring carefully of aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete and all as directed by EIC
Pulling out sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut all as directed.
Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed as earth wire continuity with PVC surface box complete as specified and directed for :-
(a) One light point controlled by one, one way switch single pole piano type
(b) One Fan point controlled by one, one way switch single pole piano type
(c) One 3 pin 5 Amp socket outlet on the same board .
(d) One 3 pin 5 Amps socket out let on independent board
(e) One bell point controlled by one bell push on independent board.
All as per item No.134 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.
M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through existing conduit including provn of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with new plastic laminated white coloured top sheet cover 3.0 mm thick on existing sunken box complete as specified and directed.
(a) One light point controlled by one, one way switch single pole piano type
(b) One Fan point controlled by one, one way switch single pole piano type
(c) One 3 pin 5 Amp socket outlet on the same board .
(d) One 3 pin 5 Amps socket out let on independent board
(e) One bell point controlled by one bell push
All as per item No.141.00 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.
M&L for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 2.5 Sqmm single core, copper conductor drawn through and including PVC casing caping ISI marked with accessories and 2.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed. (Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)
All as per item No 148.00 but with 4 sqmm copper conductor complete.
Supply and Fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 20 W light source including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative (white) with 2 Core copper wire from ceiling rose to light fitting all as directed by EIC.
All as per item No 151.00 but 18/20 Watt 4 ft LED lighting fixture
S&F in Replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated all as specified
All as per item No. 153.00 above but SPN 12 way with 200 Amp rated Busbar. (Make : Havell's, L&T/ Standard/C&S/Indoasian/Polycab)
All as per item No. 153.00 above but SPN 8 way with 200 Amp rated Busbar. (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)
All as per item No 153.00 above but SPN, 4 way. (Make : Havell's, L&T, Standard, Crompton/Indoasian/Polycab)
S&F in replacement of isolators/MCBs, etc. In distribution board of the following rating and capacities
(a) MCB TPN 415 volts 63 Amps Capacity, 10 KA
(b) MCB SPN of 240 volts 20/32/40 Amps Capacity, 'C' series, 10 KA
(c) MCB SP of 240 volts 5-40 Amps Capacity, 'C' series, 10 KA
Supply and Fix in Replacement capacitor of capacity 2.5 mfd (PVC Body) suitable for ceiling/Exhaust fans/Wall Mounted Fans of any description,any sweep complete all as specified and directed.
Taking down and Refixing Ceiling fans/Exhaust fan of any sweep any size from site for repair complete all as specified and directed by Engr-in-Charge.
M & L for taking out & removing old burnt-out windings of Ceiling fans of any description and rewinding of fan motor with appropriate size super enameled copper wire as approved by Eng-in-charge including insulating material such as illuminous paper,Letherized paper,cotton tape,glass sleeving,insulating varnish ,Bearing ,Bushes,capacitor etc.and transportation to site after testing at workshop,connecting and testing on full load to the entire satisfaction of Eng-in-charge,including painting of fans of any description(ceiling fan/exhaust fan/wall mounte fan/pedestal fan) with applying one coat of synthetic enamel paint(white/Grey) by spray machine including preparation of exisiting decorated surfaces of fans complete as directed by Eng-in-charge.
All as per item No 163.00 but rewinding of metal exhaust fans 250 mm to 450 mm size complete.
Supply and Fix in replacement of PVC body exhaust fan, AC single phase 230/240V of size 250 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge.( Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).
Supply and Fix in replacement of PVC body exhaust fan, AC single phase 230/240V of size 300 mm sweep with louvers including making hole of suitable size/ Alteration to the existing hole to fix the Exhaust fan all as directed by Engineer-in-Charge.( Note: Old unserviceable Exhaust Fan will be deposited in MES store yard).
S&F in replacement, switch piano type, 5 Amp. SP, one way all as directed/ specified.
S&F in replacement socket outlet 3 pin, 5A, flush type all as directed/ specified.
S&F in replacement switch socket combination, 2 in 1, 5 Amp, flush type all as directed/ specified.
S&F in replacement switch socket combination 2 in 1, 5/16A 5 in 1 Amp flush type universal all as directed/ specified.
S&F in replacement switch bell push, flush type, 5 Amp all as directed/ specified.
S&F in replacement bell, AC, 230 V, SP, ding dong type all as directed & specified.
S&F in replacement stepped type electronic fan Regulator flush type on the existing phenolic laminated etc as reqd single pole 240 volts grade 350 watts heavy duty ISI marked.
S&F in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.
S&F in replacement of Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified.
Supply and Repair hylem sheet 3mm thick as existed in the switch board making provision for fixing switches and socket all as specified and directed
Material and Labour for disconneting electrically and mechanically the existing geyser of any description,any capacity and make/type and in any position for repair/replacement/painting/cleaning etc including disconneting existing cold and hot water pipe connections, strip opening of geyser for descaling of tank element, thermostate,inlet/outlet water pipe connection etc using suitable chemical/wire brush,replacement of unserviceabe parts, re-assembling the same after,repair/descaling, fixing in position including, connecting inlet/outlet water pipe connection, electrical connections any testing of geyser complete all as specified and directed.
S & F in replacement metal plug top 20 Amps 3 pin all as directed specified
Supply and fix in replacement 2.0 KW Electric heating element at site including rubber ring washers ISI marked Make: Theeta/Power pack/Racold/Vinus ( All ISI marked)
S&F in replacement for PVC connection with brass nipple 15 mm x 450 mm long for geyser 25/50 ltrs capacity as per sample complete all as specified and directed by Engineer in Charge.
S& F in replacement of 15mm bore bib taps ISI marked cast copper alloy fancy type chroumium plated with crutch butterfly handle screw down for iro n pipe or brass ferrule .
Supply and fixing in replacement of Water heater storage type 25 Ltr, Ratted Wattage -2000 W, Voltage: -230V, AC Frequency (HZ): -50 Phase: -Single Auto cutoff, Rust Proof External Body Suitable for highrise building Suitable for water pressure head upto 8 bars Star rating (BEE): -5 (Note: Old unserviceable Water Heater will be deposited in MES store yard).
Supply and fixing in replacement Tamper proof Single phase AC KWH meter 10-60 Amps with following features including sealing and sealing wire, Class – 1 accuracy as per IS 13779, 240V, 50HZ LCD display, Forward energy recording irrespective of current direction, LED indication for earth leakage, elegant polycarbonate enclosure High surge with stand up to 8 KV Anti temper feature. Measures & Displays kWh. ( Note: Old unserviceable elect meter will be deposited in MES store yard).
SARASWATI CONSTRUCTION
OM SREE MAHADEV TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .