UPGRADATION OF RDS MESS AT AFS SURYALANKA

Amount

Demolition of plain cement concrete (un-reinforced) in ground floors, pavings and in foundations not exceeding 15cm thickness (below or above ground level) including removal of demolished material out side MD land complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement morar bedding, removing serviceable tiles to store and rubbish off the permises complete all as spd and as directed by Engr-in-Charge.

M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (suqare/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc, set and jointed in neat cement slurry laid over and including 15mm thick screed in cement mortar 1:6 and pointed in white or coloured cement to match complete all as spd and as directed by Engr-in-Charge.

M&L for Glazed ceramic coloured tiles 300 x 200 size 7 mm thick in vertical surfaces as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 10mm thick screed in cement mortar in cement mortar 1:4 all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in screed bed below floor tiles etc. all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6, type C-1, using 20mm graded stone aggregate as in plinth protection, paving etc. surface finished even and smooth without using extra cement all as specified and directed.

Taking down chowkats or frames (without taking off shutters from frame ) not exceeding 1.5 sqm each all as specified and directed. (including cutting holes for removing / inserting hold fasts and making good disturbed portions with PCC 1:2:4 type B-0 or in CM 1:4 after re fixing of frames) complete all as directed.

Taking down chowkats or frames (without taking off shutters from frame ) exceeding 1.5 sqm but not exceeding 4 Sqm each all as specified and directed. (including cutting holes for removing / inserting hold fasts and making good disturbed portions with PCC 1:2:4 type B-0 or in CM 1:4 after re fixing of frames) complete all as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2 mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) (A) Area not exceeding 2.00 sqm each

S&F 4.0 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F 4.8 mm Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

BEEGEE DESIGN SYSTEMS (BID ID -3094535)

K VENUGOPALA SWAMY (BID ID -3092916)

M/S SIRI BUILDERS (BID ID -3093063)

SHIKHARA PROJECTS (BID ID -3093920)

PAVANI INFRAS (BID ID -3091561)

BEST ENGINEERING (BID ID -3091477)

HARSHA CONSTRUCTIONS AND ENGINEERING WORKS (BID ID -3093043)