Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.0 LAccepted-AOC 24 824 GOVERDHAN COLONY MAIN BHIND ROAD GOLE KA MANDIR | L1 | Accepted-AOC LOWEST AND REASONABLE RATE | |
| 2 | L2₹50.0 L+₹5.2 L (11.6%)Rejected-Finance | L2 | Rejected-Finance HIGH RATE |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
4 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY BHUJ
GE ARMY BHUJ
SPL REPAIR TO BLDG NO P-8 ,P-10,PFS-29,PFS-30,T/PFS-273,T-PFS-256 P-253 AND MINOR WORKS AT MIL STN GANDHIDHAM UNDER GE(A) BHUJ
2023_MES_620933_1
8159
Open Tender
Civil Works
Item Rate
180 days
GANDHIDHAM
REFER TENDER
6 documents required · 6 mandatory
₹500
GE A BHUJ
₹95,000
Yes
28 Feb 2024
28 Sept 2023
6 Nov 2023
28 Sept 2023
4 Nov 2023
18 Oct 2023
Amount
Taking down of Wall panelling and similar work complete all as specified and as directed.
S & F of Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.
S & F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.
M & L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.
M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes like tiles etc complete all as specified and directed.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified & directed of following sizes :-
(a) 16 mm bore
(b) 20 mm bore
(c) 25 mm bore
Dismantling of water tanks and removing to store having Capacity of Exc 500 litres and n.exc 1000 litres complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S & F of mild steel Fe 410-W (Grade-Fe 250) quality A of Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings of any height complete all as specified and directed.
Supply & fix of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as directed by manufacturer on steel members including scaffoldings of any height complete all as specified and directed.
Supply & fix of Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as directed by manufacturer on steel members including scaffoldings of any height complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome complete all as specified and directed.
Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work complete all as specified and directed.
M & L for Anodised aluminium snap grid having Size of grid 605 x 605mm frame work for false ceiling all as specified complete all as specified and directed.
S & F of 9mm thick PVC laminated gypsum ceiling tiles size of 600mm x 600mm, square edge, front side laminated PVC and back side aluminium foil complete all as specified and directed. (Frame work for ceiling shall be measured and paid separately).
Complete removal of existing treatment on wall (any number of layers) by scarping with steel scrapers or any other mean and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint all as specified.
Taking down of chowkhats / frames n exc 1.50 sqm each without taking off shutter each complete all as specified and directed.
Taking down of chowkhats / frames exc 1.50 Sqm but n exc 4.0 sqm each without taking off shutter each complete all as specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S & F of 5.5mm thick Sheet glass, ordinary quality and glazing sheet glass is ground or obscured or frosted, on one side with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.
Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified.
S & F of aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed.
S & F of aluminium handle 150 mm cast type anodised complete all as specified and directed.
S & F of 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type 'C'-22 complete all as specified and directed.
S & F in repairs for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles and applying one coat of bituminous primer @ 200 gms per sqm and then laying 3 mm thick APP modified bituminous membrane weighing not less than 3.50 kg/sqm reinforced weighing not less than 160 gms/sqm laid by torch application method overlap while torching shall be 75 mm on length and 100 mm width side, all angles & bituminous should sealed with extra care to ensure full bondage all joints and changes should covered with CM 1:3 with water proofing chemical as per manufacturer's instructions and cured well before laying membrane etc and applying aluminium paint @ 100 gram / sqm on roof or vertical surfaces complete all as directed.
Dismantling of water tanks and removing to store having Capacity of Exc 500 litres and n exc 1000 litres complete all as specified and directed.
M&L for screed bed of mortar 15 mm thick in cement mortar 1:4 for laying APP membrane and including mixing water proofing compound as per manufactureres instructions complete all as specified and directed. Note :- Water proofing compound shall be measured and paid for seperately under appropriate item of Sch "A' as supply only complete all as specified and directed.
M&L for brushing neat cement slurry with 3.0 kg of cement per square metre complete all as specified and directed.
Supply only Liquid water proofing compound complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.
M & L for Non Skid coloured ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M & L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.
M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes like tiles etc complete all as specified and directed.
M & L for rendering 10 mm thick in CM (1:4) on fair faces of brick work complete all as specified and directed.
Taking up or down steel tubing / CPVC Pipes and connection including cleaning for refixing or removed to store,
(a) 16 mm bore
(b) 20 mm bore
(c) 25 mm bore
Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good ,cutting n, exc. 10cm girth complete all as specified and directed.
S & F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white,including trap and connection to drain and flushing pipe (excluding flushing cistern) including seat cover with flat bottom and mild steel chromium plated or aluminium hinging devices for pedstal pan complete.
S & F in repair vitreous China squatting pan, 'Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed.
S & F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.
S & F in repairs PVC connection 15mm size PTMT nuts of length 450 mm.
S & F as in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions .
S & F as in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions.
S & F as in repair 15 mm bore fancy type bib taps long body cast copper alloy chromium plated, screwed down, screwed for iron pipe or for brass ferrule.
S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete and directed.
S & F in repair CP soap dish complete all as specified and directed.
S & F in repairs acrylic shelf having size of 56 cms x 13 cms with chromium plated bracket below WHB mirror complete all as specified and directed.
S & F in repairs 15 mm bore overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long (light weight) round shape with wall flange complete all as specified & directed.
S & F as in repair PVC (SWR) multi floor trap having 75mm diameter of outlet with grating including jointing with solvent cement complete all as specified & directed.
Taking down cement plaster of any description from brick wall or concrete surfaces including racking out joints and hacking for key, scrubbing down with water etc complete all as directed.
M & L for 15 mm thick plaster in CM (1:6) on brick work / RCC concrete surfaces of wall and finish the surface even and smooth without using extra cement complete all as specified and directed.
M & L for 5 mm thick plaster in CM (1:3) on brick work / RCC concrete surfaces of ceilings complete all as specified and directed.
M & L for preparation of newly plastered ceiling surfaces and applied three coats of white wash complete all as specified & directed.
Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down, smoke soot moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash on ceiling surface complete all as specified and directed by Engr-in-Charge.
M & L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint complete all as specifed and direcetd.
Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint all as specified.
M & L for rendering 15 mm thick in CM 1:4 on concrete / fair surfaces of block masonary and including mixing water proofing compound as per manufactureres instructions complete all as specified and directed. Note :- Water proofing compound shall be measured and paid for seperately under appropriate item of Sch "A' as supply only
M & L for preparation of newly plastered wall surfaces and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scrapers or any other mean and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
Taking down chowkhats n exc 1.50 sqm each without taking off shutter each complete all as specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
M & L for preparatin of old painted wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthtic enamel paint complete all as specified.
S & F of 5.5mm thick Sheet glass, ordinary quality and glazing sheet glass is ground or obscured or frosted, on one side with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified.
S & F of aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed.
S & F of aluminium handle 150 mm cast type anodised complete all as specified and directed.
S & F of 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 complete all as specified and directed.
Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified.
Demolition and breaking up drain pipes upto 100/110 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed
Demolition and breaking up drain pipes upto 75 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed
Supply and fixing of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with suitable clamp complete all as specified and as directed.
Supply and fixing of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with suitable clamp complete all as specified and as directed.
Supply and fixing of PVC (SWR) junction single, (single T) equal or unequal provided with access door suitable for 110mm bore PVC pipes complete all as specified and as directed.
Supply and fixing of PVC (SWR) bends any radius suitable for 110mm bore PVC pipes with access door complete all as specified and as directed.
Supply and fixing of PVC (SWR) bends any radius suitable for 75mm bore PVC pipes with access door complete all as specified and as directed.
Supply and fixing of PVC (SWR) vent cowl for 110mm bore PVC pipes complete all as specified and as directed.
Supply and fixing of PVC (SWR) WC connector bent type for 110mm bore PVC pipes complete all as specified and as directed.
Supply and fixing of PVC (SWR) for 75mm Diameter of outlet floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed.
Supply and fixing of PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.
S & F for 1000 ltrs capacity rotational moulded polyethelene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.
S & F in repairs 20 mm bore dia gun-metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed complete all as specified and directed.
S & F in repairs 25 mm bore dia gun-metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed complete all as specified and directed.
S & F in repairs 25 mm bore ball brass valves,high pressure,with polythene float and flunut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified.
S & F in repair vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets,complete all as specified and directed.
S & F in repairs 15 mm bore, brass chromium plated, fancy type health faucet with SS connection pipe 1 mtr long complete all as specified.
S & F as in repairs grating round 150mm size of PTMT(minimum 100 gms) complete all as specified.
S & F in repairs 15 mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type, high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts.
M & L for preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified.
Excavating in post holes (or similar holes) in soft / loose type of soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed
M & L of PCC Type D2 1:4:8 (40mm graded aggregates)as in foundation, filling and mass concrete complete all as specified and directed.
Removing excavated material n. exc. 50 m and depositing where directed at a lavel n exc. 1.5 m above the starting point complete all as specified and directed.
S & F in repair vitreous China counter wash basin snow white, rectangular bowl having size of 605 X 470 x 170 mm, wash basin with small counter on both sides, provn of over flow and tap hole, fixing over granite complete all as specified and directed. (Cat Part No S2030120 of Cera (Chester) or equivalent in Parryware and Hindware)
S & F in repair vitreous China counter wash basin snow white, rectangular bowl having size of 550 X 425 x 180 mm, wash basin with small counter on both sides, provn of over flow and tap hole, fixing over granite complete all as specified and directed. (Cat Part No S2030114 of Cera (Chester) or equivalent in Parryware and Hindware)
S & F in repairs to CP central hole basin mixer having 15mm bore dia, fancy type, table mounted, chrome finish, with 450mm long braided hoses complete all as specified and directed. (Make : Jaquar or Parryware or Hindware equivalent)
S & F in repairs to frameless looking Mirror 450mm x 600mm with bevelled edges, wall mounted and suitable for bathrooms alongwith necessary studs / brackets etc complete all as specified and directed.
Demolition of precast concrete block walling and similar items i.e. ashlar facing dressing stone work, precast concrete articles etc of any description and in any position built in cement mortar including all quoins, arches and pillars etc. complete all as specified & as directed.
M & L for Precast cement concrete block masonry with solid blocks Type C1 1:3:6 (20mm graded aggregate), exc. 10cm in width and setting in Cement mortar 1:6 complete all as specified & as directed.
Providing edge moulding to 18-20mm thick Granite stone any description stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete.
M & L for 15mm thick screed bed or bedding layer in cement mortar (1:4) for laying floor finishes like tiles, granites, kota etc complete all as specified and directed.
Taking down of uPVC Wash hand basin cabinet with out taking off shutters from the frames and inclusive of complete all as specified and as directed.
Providing and fixing factory made solid Foam uPVC profile for wash hand basin cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastner with necesary stainless steel screws, all complete as per direction of Engineer-in-charge.
Providing and fixing factory made wash hand basin Cabinet Shutter / Partition / Sides / Platform etc having 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
M & L Point wiring for one light/fan point controlled by one modular switch, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC casing & capping with all accessories/fittings, modular metal flush box, modular white cover plate with frame fitted with screws, washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly and make wall/panel surface as existing same colour and making good disturbed surfaces of walls, panels, floors, etc. to match with the existing good surfaces of walls, panels, floors etc. complete all as specified and as directed by Engineer-in- Charge.
M & L Point wiring for 16 amps socket point controlled by one, one way switch using 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLS unsheathed cables in and including in PVC casing & capping with all accessories/fittings, modular metal flush box, modular white cover plate with frame fitted with screws, washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly and make wall/panel surface as existing same colour and making good disturbed surfaces of walls, panels, floors, etc. to match with the existing good surfaces of walls, panels, floors etc. complete all as specified and as directed by Engineer-in- Charge.
S & F Modular switch 1 way 6A, 1 module of sigle pole ,5/6 Amps, one way ,complete all as specified and as directed by Engineer-in- Charge.
All as per Sl item No 112 above but for one socket outlet point 6 Amps on independent board controlled by one, one way switch.
S&F Modular switch 1 way 16A, 1 module of single pole, complete all as specified and as directed by Engineer-in- Charge.
S&F Modular switch socket outlet 3 pin 6 Amp flush type controlled by one switch , complete all as specified and directed by Engineer-in- Charge.
S&F Modular switch socket outlet 3 pin, 16 Amp, flush type, complete all as specified and as directed by Engineer-in- Charge.
Ceiling rose, Pilot 3 Plate ceiling rose 6A ,complete all as specified and as directed by Engineer-in- Charge.
S&F Lamp Holder PVC/ polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer-in- Charge..
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed
Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to light fittings complete all as specified and directed
Supply & fixing Gypsy Life indoor wall light fitting, including 12 watt LED light, 220 volt, AC, along with fixing accessaries such as screws, washer etc complete all as specified and as directed by Engineer-in- Charge.
Supply and fix exhaust fan in repair made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed
Taking down old UNSV light fittings after disconnection of electric connection carefully complete all as specified and as directed by Engineer-in- Charge.
Supply & fixing Vintage bloom timeless wall light fitting, including 12 watt LED light, 220 volt, AC along with fixing accessaries such as screws, washer etc complete all as specified and as directed by Engineer-in- Charge.
Supply & fixing decorative lamp, glassSr Antique look style, wall mounted, multi color glass fitting, including 12 watt LED light, set of two, 220 volt, AC, along with fixing accessaries such as screws, washer etc complete all as specified and as directed by Engineer-in- Charge.
Supply & fixing decorative black Apple design Linear Cluster Pendant light/ Cluster Ceiling light, set of three, including 12 watt LED light, 220 volt, AC, along with fixing accessaries such as screws, washer etc complete all as specified and as directed by Engineer-in- Charge.
Supply & fixing Outdoor LED, waterproof, IP-65, Exterior wall step light, PIXORA 8 watts, 4 way oval Up-down, 220 volt, AC along with fixing accessaries such as screws, washer, clamps etc complete all as specified and as directed by Engineer-in- Charge.
Supplying, laying, fixing and testing only LT UG electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip or wire armoured, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 6 sqmm, 2 core laid in trenches/ under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts , bolts, washers, complete all as specified and directed by Engineer-in- Charge. Note : Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, foundation for poles etc., and getting out in soft/loose soil.
Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point as directed.
Returning, filling in, including spreading, levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-charge.
Supply and spread fine dry sand locally available for cable cushioning complete all as specified and directed by Engr-in-charge.
M&L for laying sub class 'B' brick in trenches as cable protection covers across the length of the cable complete all as specified and directed by Engr-in-charge.
S&F MCB DB epoxy powder coated , SPN 2 way, 240 V, with 200 amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door as in replacment ,complete all as specified and directed by Engineer-in- Charge.
BLANK
BLANK
S&F Gypsy Life indoor wall lifgt fittings ,including 12 watts LED light ,220 volts AC alongwith fixing accessories such as screws washer etc compliete all as spicified and directed by engineer in charge .
S&F Madular Fan step regulator, 120W complete all as specified and as directed by Engineer-in- Charge.
S&F modular White cover plate with frame, 2 module all as specified and directed
S&F modular White cover plate with frame, 3 module all as specified and directed
S&F modular White cover plate with frame, 4 module all as specified and directed
S&F modular White cover plate with frame, 6 module all as specified and directed
S&F modular metal flush box suitable for 2 module all as specified and directed
S&F modular metal flush box suitable for 3 module all as specified and directed
S&F modular metal flush box suitable for 4 module all as specified and directed
S&F modular metal flush box suitable for 6 module all as specified and directed
Supply & fix Ceiling Fan 1200mm sweep complete with blades, down rods, total copper winding, double bearing, electronic regulator and all accessories, 230V, minimum air delivery 210 CFM with service value greater than 6 BEE and five star rating with brushless direct current motor (BLDC) all as specified and directed by Engr-in-Charge.
Supply & fix heavy duty, steel body, Exhaust Fan powder coated, double bearing, 230 volts, 50Hz, single phase, oscillating 300mm sweep complete suitable for fixing to wall including electrical connection, square aluminium lover with 4 flaps all as specified and directed by Engr-in-Charge.
NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.
zotabrothers
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .