Providing of Power Supply to the CT Scan Machine and 2 No. of 10 Ton ACs of District hospital Ganderbal

Supply/Laying/Testing and Commissioning of 3.5 Core 185 mm sq. Al armored XLPE Insulated,PVC cable Havells/RR-Kabel/ KEI/ Paramount/ Polycab/ eq. Make to be approved by EIC. The cable shall include end termination lugs with its crimping /taping.

ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER ROD EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value.Supply,Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 20mm Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through suitable DWC High Density Poly ethylene Pipe having Corrugation complete job.

Design/Supply/Installation/Testing and commissioning of CPRI Approved distribution/feeder outdoor panel having a sloped roof (3+1) Al. bus bar of cubical type vermin proper double door lockable outdoor type fabricated out of 14/16 SWG MS Sheets powder coated weather proof, dust proof with IP 65 protection with angle iron stand of 2.5 feet height/ground clearance properly grouted in cement concrete of 1:2:4 ratio-filter with baby insulators/glands/thimbles suitable for use at 415 Volts 3 Phase,4 wire 50Hz system complete in all respects complete in all respects with following Incoming: 400 Amp-4 pole,50kA C-CURVE MCCB with extended terminals (Adjustable Thermal & Fixed Magnetic) of L&T/Legrand/Schneider/eq. make to be approved by EIC -01 No. Digital Voltmeter =1 no, Digital Ammeter = 1 no , CT coils for Ammeter 300 /5A = 1 set ,phase indicators =1set Outgoing: 600 Amp TPN Bus bar Al Strips = 1 Set

Supply/Installation/Testing and Commissioning of CPRI Approved panel Wall /Floor mounted) compartmentalized , 415 volts TPN MCCB Main Distribution panels ,fabricated out of sheet steel of 16 gauge dust protected, painted incl earth terminal with all necessary accessories as required for panel with internal wiring of panel .The Panel is to provided and fitted with following adjustable type controlling /Protection switch gear devices (1) Normal Incoming: A) 400 Amp TPN MCCB with ROH of breaking capacity of 50KA with extended thimbles of Legrand/Siemens/ABB/LK / eq. make to be approved by EIC = 1No. B) 600 Amp TPN Bus bar Al Strips = 1 Set Digital Voltmeter =1 no, Digital Ammeter = 1No. , CT coils for Ammeter 300 /5A = 1 set ,phase indicators =1set (2) Outgoing: A) 250 Amp TPN MCCB with ROH of breaking capacity of 36KA with extended thimbles of Legrand/Siemens/ABB/LK / eq. make to be approved by EIC = 1No.(For CT-Scan) B) 200 Amp TPN MCCB with ROH of breaking capacity of 36KA with extended thimbles of Legrand/Siemens/ABB/LK / eq. make to be approved by EIC = 1No.(For 2 No. of 10-TON AC's) C) 100 Amps TPN MCCB with ROH of breaking capacity of 25KA with extended thimbles of of Legrand / Siemens/ABB /Schinder /L&T / eq. make to be approved by EIC = 02 No. (Spare) The Panel manufacturing unit should be CPRI Registered and the Contractor has to submit the test certificate of main switch gear and Drawing of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards) is to approved by Engineer Incharge before manufacturing.