Tender ID

Kerala

Active

Works

Civil Works - Buildings

CONSTRUCTION OF VEHICLE SHED AT ATTAPPADI RANGE OFFICE BUILDING DURING 2026-27

Forest Department

RANGE FOREST OFFICE ATTAPPADY | Palakkad, Kerala

Amount: ₹3.0 LCloses: 18 Nov 20263d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published10 Nov 2026
Closes18 Nov 2026
Bid Opening20 Nov 2026

Tender Value

₹3.0 L

EMD Value

₹7,454

Closing Date

18 Nov 2026, 6:00 pm3d left

Tender Inviting Organisation

Name

PREVEEN P

Address

Divisional Forest Office Aranyakam Mannarkkad Palakkad

Work Description

CONSTRUCTION OF VEHICLE SHED AT ATTAPPADI RANGE OFFICE BUILDING DURING 2026-27

Tender Information

Tender ID

2026_FD_887836_1

Reference Number

KFDDO/10778/2026-DFOMNRKD/D

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Period of Work

360 days

Location

RANGE FOREST OFFICE ATTAPPADY

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredSigned copy of Preliminary Agreement (.pdf)

RequiredSigned copy of Standard Bid Document (.pdf)

RequiredAttested copy of valid Registration certificate issued by Kerala PWD certificate (.pdf)

RequiredSelf attested copy of Pan Card, Aadhaar card, GST Registration, Address proof and Identity proof (.pdf)

RequiredFilled E payment form (.pdf)

RequiredDuly signed copy of Notice Inviting Tender (.pdf)

Finance

RequiredBill Of Quantity (BOQ) (.xls)

Fee & Financial Details

Tender Fee Amount

₹660

EMD Fee Amount

₹7,454

Important Dates

Last Activity

10 Nov 2026

Published

10 Nov 2026

Bid Opening

20 Nov 2026

Download Starts

10 Nov 2026

Download Ends

18 Nov 2026

Submission Starts

10 Nov 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (8 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1CONSTRUCTION OF VEHICLE SHED
1.001	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	1.15	cum	9,235.97	₹10,584.42
1.002	16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.	57.6	sqm	1,192.59	₹68,693.18
1.003	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	576	kg	230.93	₹1,33,015.68
1.004	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	72	sqm	842.14	₹60,634.08
1.005	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	9.6	metre	565.05	₹5,424.48
1.006	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	67	sqm	170.52	₹11,424.84
1.007	16.83:Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.	44	sqm	136.23	₹5,994.12
1.008	15.18:Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.	410	kg	5.85	₹2,398.5

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 10.21 MB

Work Item Documents

preliminaryagreement.pdf

Tender Documents • 0.56 MB

ePayment.pdf

Tender Documents • 0.01 MB

SBD.pdf

Tender Documents • 1.63 MB

BOQ_1515669.xls

BOQ • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1CONSTRUCTION OF VEHICLE SHED
1.001	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	1.15	cum	9,235.97	₹10,584.42
1.002	16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.	57.6	sqm	1,192.59	₹68,693.18
1.003	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	576	kg	230.93	₹1,33,015.68
1.004	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	72	sqm	842.14	₹60,634.08
1.005	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	9.6	metre	565.05	₹5,424.48
1.006	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	67	sqm	170.52	₹11,424.84
1.007	16.83:Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.	44	sqm	136.23	₹5,994.12
1.008	15.18:Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.	410	kg	5.85	₹2,398.5

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1CONSTRUCTION OF VEHICLE SHED

1.001

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

1.15

cum

9,235.97

₹10,584.42

1.002

16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

57.6

sqm

1,192.59

₹68,693.18

1.003

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

576

230.93

₹1,33,015.68

1.004

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

sqm

842.14

₹60,634.08

1.005

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)

9.6

metre

565.05

₹5,424.48

1.006

15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

sqm

170.52

₹11,424.84

1.007

16.83:Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

sqm

136.23

₹5,994.12

1.008

15.18:Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

410

5.85

₹2,398.5