Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.9 LAccepted-AOC 101 VRAJ APARTMENT OPP POLICE HEAD QUARTER SARU SECTION ROAD JAMNAGAR 361008 | JAMNAGAR | JAMNAGAR | GUJARAT | 361008 | L1 | Accepted-AOC LOWEST AND REASONABLE RATE | |
| 2 | L2₹41.6 L+₹72,330.15 (1.77%)Rejected-Finance WANIAWAD BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹43.0 L+₹2.1 L (5.07%)Rejected-Finance | L3 | Rejected-Finance HIGH RATE | |
| 4 | L4₹44.4 L+₹3.5 L (8.62%)Rejected-Finance | L4 | Rejected-Finance HIGH RATE |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
17 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY
BHUJ
CONSTR OF DUST PROOF ROOM AND STORAGE ACCN FOR MIL STN BHUJ UNDER GE ARMY BHUJ
2023_MES_621161_3
8158
Open Tender
Civil Works
Item Rate
180 days
GE ARMY BHUJ
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE ARMY BHUJ
₹97,000
Yes
1 Mar 2024
20 Jan 2024
19 Feb 2024
20 Jan 2024
17 Feb 2024
3 Feb 2024
Amount
M&L for surface dressing soft/ loose soil n exc 15 cm deep
M&L Excavation in trenches, not exceeding 1.50 meter wide and not exceeding 3 meter in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not of soft/ loose soil
M&L Cement concrete in foundations, filling and mass concrete type D2(1:4:8) using 40 mm graded stone aggregate including compaction of concrete, curing etc. complete.
M&L Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/ loose soil.
M&L Form work to sides of concrete foundations, foottings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar works; vertical or to batter for rough finished surfaces.
M&L RCC M-25 in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc; basement slabs, under reamed piles and mass concrete.
M&L Form work to sides of pillers, posts, struts, piers, columns and stanchions for rough finished surfaces.
Reinforced cement concrete (design mix M-25) in columns, pillars, piers, posts and struts.
M &L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L Reinforced cement concrete (Design Mix, M-25) in beams, cantilevers, bressummers, lintels complete
M&L Reinforced cement concrete (Design Mix, M-25) in Chhajha
M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
M&L Reinforced cement concrete (Design Mix, M-25) inSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, 1:6 Type C1 complete1 :3:6
M&LRendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 As in Internal wall
M& L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM 1:3 As in Celling
Rendering 15mm thick on fair faces of brick work or concrete surfaces,10mm in CM 1:6 and 5mm in CM 1:4 as in Extarnal Wall
M&L for preparation of new plastered surfaces and applying two coat of OBD over primer
M7L three coat of white wah in Celling on new surface
M&L for preparation of newly plastered surfaces of walls & applying 2 coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
M&L TMT bars 10 mm dia and over cut to length bent to shape required including cranking,bending,spirally for hooping and binding with and including mild steel wire anealed not less than 0.9 mm dia
Ditto but 5 mm dia and over up to and including 10 mm dia in stirrups spacers and binders
S & F of 125 X 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed
S & F of 35mm thick II class Hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with] commercial face veneers: supplied and fitted to chowkats incl necessary Aluminium hinges tower bolts, Handles and Slidfing Door Bolts and Door Fasteners filled with concrete incl Painting to Door Complete all as spd and Directed by Engr In Charge ®
S & F of Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded incl Necessary glass Panes Complete
S & F for anodised Aluminium partition/ door frame of size 100 x44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98mm thick, bottom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 x 44 x1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stopper, tower bolts 200mm, sliding door bolt 300mm or mortice lock with 5mm thick tinted glass /pre laminted particle board (Novapan) panel and making good to the disturbed wall surfaces to match existing surface complete all as specified and directed.
S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.Note : Making all edges i.e. cill and jamb good by cement mortar 1:3
M & L powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm all as specified
Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 75 mm thick, watered and rammed to a true surface
PCC for C1 (1:3:6) type D-2 using 20 mm graded stone aggegate
M& L PCC for 75 mm thick (1:4:8) type D-2 using 40 mm graded stone aggegate finishing even and smooth as in Plinth Protection complete
M&L Terrazzo tiles 20cm x 20 cm x 20mm thick, with size of chips upto 6 mm; set jointed and pointed in neat cement slurry in floors, and cut and polishedto match including 15 mm thick screed bed of CM 1:6.
PCC for 75 mm thick (1:4:8) type D-2 using 40 mm graded stone aggegate
PCC for 25mm thick (1:2:4) Type-B0 using 20mm geaded aggregate
Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 75 mm thick, watered and rammed to a true surface
Material and labour for treating the soil under plinth protection at the rate of 5 liter of emulsion per square meter of surface area.
Material and labour for anti termite treatment along top surface of filled earth at rate of 5 litr per sqm
M&L Treating the back fill in contact with foundation at the rate of 7.5 liter of emulsion per square meter of vertical surface (Area of the sub structure in contact with back fill to be measured).
M&L Treating at Junctions of the Wall and the Floor with foundation at the rate of 7.5 liter of emulsion per square meter of vertical surface
M&L Treating the soil along with external perimeter of building at a rate of 2.25 litr of emulsion per meter of perimeter of wall
M&L removal of excavated soil n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point
M& L for Machine cut kota stone slab Shelves 40-50 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M& L of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application ove 5mm thick rendereing in CM 1:3 complete all as specified.
Supply and fix single point air termination aluminium rod, 12 mm dia, 300 mm long as all specified and directed.
Supply and laying 40 mm bore galvanized steel tubing, medium grade (For fixing air termination rod as pipe post (9 Nos x 1.2 mtr long ), with all fittings laid in trenches / road / etc complete as all specified and directed.
M&L for PCC 1:3:6 type C-1 using 20 mm graded aggregates as in copings(150x150x200 mm) for holding GI pipe kneelers, apex stones, bed plates, kerbs etc., water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed
Provision of flat iron clamps 25x6 mm, MS collars, bolts, nuts, washers and MS Plates complete
supply and fix Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 32 mm x 6 mm galvanised iron strip all as specified and directed .
M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth strip 32 x 6 mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’
Supply and fix test point termination block of size 75 mm x 75 mm x 25 mm made of Gun Metal or phospherous bronze drilled and screwed including 3 Nos, 8 mm dia 25 mm long hex head screw and box of size 90 x 90 x 90 mm (Made out of 1.6 mm thickplain brass sheet) and screwed to wall for protection of test point complete all as specified and directed.
supply and fix epoxy earth strip insulator suitable for holding 32 mm x 6 mm strip all as specfied and directed
Supply, install, commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electricmotor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening as specified.
supplying, installing, commissioning and testing of inverter type split air conditioning unit 1.5 Ton indoor / outdoor complete with cordless remote control unit ,High ambient cooling,Adjustable mode and stabliliser free operation with inbuilt with BEE 5 star rating inverter type with CFC refrigerant 1.5 tonne capacity complete and comprising of the following :- a) Refrigerant copper pipe of suction and discharge line with insulation over pipe , condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including complete wiring for evaporator & condensing unit with fixing of suitable size of copper cable,b) fixing outdoor unit at suitable unit and supply of bracket of 2 nos for holding outdooer unit and make odd the disturbed surface to match with the existing surface after pluging the holes complete all as specified and directed.
supply and fix flush type Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole SP MCB 20A all as specfied and directed
supply and fixing MCB SP 6 to 16 amps in c series having current rating 10KA complete all as psecfied and directed
M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit pipe of adequate size concealed type on any type of wall / fixed to surface ceiling with PVC rawl plugs with sunken type pressed steel terminal box suitable for laminated board or Modular fititng board and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of concealed flush terminal metal box, any module white frame, top cover and connected accesories
(a) One light point controlled by one way one switch SP 5 Amps ,240 V.
(c) One ceiling/exhaust fan point controlled by one way one switch SP 5 Amps, 240 V.
(d) One switch socket outlet 3 Pin, 5 Amps, SP on independent board.
(e) One switch socket outlet 3 Pin, 5 Amps, SP on same board.
All as per the above item No 4 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet.
S&F modular switch one way 6 Amps , 1 module type complete .
S& F modular socket , 6 Amps , 2/3 pin combined 2 module complete.
S& F modular switch 16 Amps , 1 module complete.
S& F modular socket combination, 6 Amps / 16 Amps , 2/3 pin combined 2 module complete.
S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete
Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting upto PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit including as per site requirement and 2 Nos of round or square PVC bolck for fixing of FTL fitting complete all as per directed by Engr-in-charge.
Supply and fixing LED ceiling lights fitting 600mmx600mm, 36 watt complete with driver box type with driver, complete all as per directed by Engr-in-charge.
supply & fixing modular fan regulator step type , 2 module complete.
M&L for sub main wiring with two runs of 6 Sqmm (2x6 sqmm )1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductorcable confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories concealed in walls/roofs/floors etc with one run of 6 Sqmm (1x 64 sqmm ) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire complete all as specified and directed. Note:- 2 runs of 6 Sqmm ,one run of 6 Sqmm ( 2x6 sqmm + 1x6 sqmm ) cable and one meter of concelaed conduit will be measured as one unit again.
Supply & fixing MCB DBs TPN vertical, Double door, with provision of MCCB as incommer , 4 way, flush in wall, including civil work to match the disturbed surface with existing complete all as specified and directed by Engr-in-charge
S&F MCCB of capacity 100 Amps , 415 Volts, rupturing capacity 16 KA complete.
S&F MCB TPN, 63 Amps, 415 Volts, rupturing capacity 10 KA."B" Series complete.
S&F MCB SPN, 63 Amps, 240 Volts, rupturing capacity 10 KA."B" Series complete.
S&F MCB SP, 5 to 32 Amps, 240 Volts, rupturing capacity 10 KA "C" Series complete.
M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.5 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed.
Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II.
(ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule.
Note :- (i) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (ii) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his on risk and cost to the entire satisfaction of the Engr - in - charge.
M&L for point wiring with 1.5 Sqmm PVC insulated sheathed fire retardant (FR) cable with multithreaded copper conductor cable in and including heavy duty 20 mm dia ISI marked concealed PVC conduit with all accessories for one light/fan point controlled by one switch with 1.25mm thick Metal boxes concealed in wall duly painted with one coat of primer and two coat of black bituminous paint ,sleek mounting plates for fixing switches regulator and including 1.5 Sqmm stranded copper conductor earth wire connected to common earth and dully complete all as specified.
(a) One light point controlled by one way one switch SP 5 Amps ,240 V.
(b) One exhaust fan point controlled by one way one switch SP 5 Amps, 240 V.
(c) One switch socket outlet 3 Pin, 5 Amps, SP on independent board.
(d) One switch socket outlet 3 Pin, 5 Amps, SP on same board.
All as per the above item No 4 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet.
S&F switch piano flush type single pole one way 6 Amps 240V grade ISI marked.
S&F switch piano flush type single pole two way 240V grade ISI marked .
S&F socket outlet 2 in 1, 3 Pin , 6 Amps flush type ISI marked.
S&F socket outlet non inter locking type 3 pin ,16 Amps flush type ISI marked.
S&F switch piano flush type single pole one way 16 Amps 240V grade ISI marked.
S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete
Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting upto PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit including as per site requirement and 2 Nos of round or square PVC bolck for fixing of FTL fitting complete all as per directed by Engr-in-charge.
Supply and fixing of mirror light of capacity 1x10 Watt epoxy white powder coated CRCA sheet steel housing with acrylic diffuser gaskat with all fixing acessories complete all as specified and directed.
S&F sheet metal enclosures for distribution board when MCB to be used SPN ( Single pole and neutral ) 8 way, 240 Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, double door type complete all as specified and directed.
Supply & fix RCBOs double pole 40A for earth leakage, overload & short- circuit protection 30 mA complete
S&F MCB SP, 5 to 32 Amps, 240 Volts, rupturing capacity 10 KA "C" Series complete.
supply and fix AC surge protection device, one pole & neutral, Voltage 240V DIN rail mounted,electrical conncetion with suitable rating copper wire complete all as specified and directed by Engr-in-charge.
supply and fixing under voltage & over voltage protection ,DIN rail mounted,single phase electrical conncetion with suitable rating copper wirecomplete all as specified and directed by Engr-in-charge.
M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.5 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed.
Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II.
(ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule.
Note :- (i) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (ii) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his on risk and cost to the entire satisfaction of the Engr - in - charge.
S&f angle holder backlite with 1x11 Watt LED Bulb with fixed on hylum sheet including all fixing acessories and making of connection with twin core flexible copper conductor from ceiling rose to fitting complete all as specified and directed.
Supply and fix exhaust fan, Plastic body AC single Phase. 230V of size 300 m sweep with, blades, and frame and louvers complete.
Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 16 sqmm 2 core complete all as specified and directed
Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc in complete as sepecified.
Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm.
Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point.
M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation.
Supplying and laying un-reinforced precast concrete cable cover class LV Type 1, flat, size 250mm x 150mm x 40mm complete.
Supply and laying GI tube light grade 40 mm bore complete.
NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.
M/s Bombay Novelty Stores
Ram J. Laljani
sudarshan builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .