SPL REPAIR TO BLDG NO P 26 01 TO P 26 04 OR MD AACN AT KHARI ROHAR OF 79 MED REGT AT GANDHIDHAM MIL STN UNDER GE ARMY BHUJ

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for aluminium snap grid having size of grid 605 x 605 mm frame work for false ceiling complete all as specified and directed.

S & F of 9 mm thickness PVC laminated gypsum ceiling tiles size of 600x600 square edge front size laminated PVC and back side aluminium foil completeall as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE and having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved and having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise as dircetd and as specified.

Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and directed.

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling complete all as specified and directed.

M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.6 Sqm but n exceeding 0 .11 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:4 in floors, complete all as specified and directed. complete all as specified and directed.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in wall/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:3) complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick in CM 1:4 screed bed complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:3) complete all as specified and directed.

M&L machine cut Kota stone slab 20-25 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 20 mm thick in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M&L machine cut Kota stone slab 20-25 mm thick as in riser to step including 10 mm thick rendring in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointe in any mortar complete all as specified and directed.

M&L Udaipur Green marble 18-20 mm thick laid and jointed with grey cement slurry over and including 20 mm thick CM 1:3 screed bed complete all as specified and directed.(Note: All exposed side of stone slab to be rounding)

M & L for 18-20 mm thick granite ( Red) work (table rubbed and polished) in steps, Jambs, pillars, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including screed bed 15 mm thick CM (1:3) complete all as specified and directed.

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed.

M&L for pre Polished Chequered cement concrete tiles 30cm x 30cm x25mm thick on horizontal surfaces,set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed CM 1:6 complete all as specified and directed.

Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs complete all as specified and directed.

S & F 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed.

M&L for PCC 1:3:6,Type C-2 (using 40mm graded stone aggregates) as in platform for PVC tank all complete as specified and as directed.

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking up or down GI tubing 15/20 mm bore pipe and connection including cleaning for refixing or removal complete all as specified and directed.

Supplying and laying of 25 mm bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches, fixing on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 20 mm bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches ,laid concealed in floor or wall including all fittings suitable for fixing of plumbing fixture complete all as specified and directed.

S&F Butt hinges, Medium weight, cold rolled mild steel, and fixed 100mm size complete all as specified and directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L for rendering on fair faces of brick work in two layers i.e., 15 mm thick in CM 1:4 mixed finishing the surface fair and even without using extra cement complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New surfaces complete all as specified and directed.

Complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over olds urfaces complete all as specified and directed.

M&L 10mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface complete all as specified and directed.

M&L newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over and incl one coat of wall care putty on wall surface complete all as specified and directed..

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

Excavating in post hols each n.exc 0.5 cum getting out in soft / loose soil, returning filling in and ramming earth or broken rubble mixed with earth around , in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated soiils to a distance not exceeding 50 m and depsositing where directed at a level not exceeding 1.50 m above the starring point complete all as specified and directed.

M&l for hardcore of guage n. exc63mm, deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for plain Cement concrete1:4:8 type D2 using 40 mm graded stone aggt as in foundation, fillings & mass concrete complete all as specified and directed.

M&L 100 mm thick cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) incl necessary formn work all as as complete all as specified and directed.

Forming contraction (dummy) Joint 10 mm wide and 65 mm deep filled with grade A sealing compound complete all as specified and directed.

M&L walling of squared rubble regular coursed well bonded , bedded and solidly hearted curved on plan to a mean radius n.exc 6m built in cement mortar 1:6 by using old size bricks complete all as specified and directed.

S&F in repairs vitreous china counter TOP wash basin, white, of size 425X425X145 mm excluding taps, brass coupling 32mm, bottle trap of 32mm size with 300mm long complete all as specified and directed. (Catalog no ONS-WHT-10901).

S&F in repair designer looking mirror of size 1350mmX900mm fixing on wall with brass fixing knob complete all as specified and directed.

S&F in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding complete all as specified and directed.

S&F in repairs angular stop cock with wall flange complete all as specified and directed. (Make: Jaquar CATALOG NO. QQT-7053)

S&F in repair single towel rail of 600mm long complete all as specified and directed. (Make:Jaquar Catalog no.AHS-CHR1581)

S&F in repair soap dish complete all as specified and directed. (Make Jaquar Catalog no. AQN-CHR-7731 )

S&F 0.63 mm thick stainless steel plate rack of size 31"x36"x10" complete all as specified and directed.(Cat part No 348 of Make-Prayag)

S&F in repairs fancy type Bib taps 15mm bore CP with wall flange , screwed down, screwed for iron pipe or for brass ferrule and fixed.(Make Jaquar cat part no: QQT-7037)

S & F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed.

S&F in repairs, Pillar cock fixed in 15mm bore pipe complete all as specified and directed.(Make: Jaquar FUS-CHR-29021)

S&F in repair over head shower with shower arm 140mm dia . Round shape single flow with air effect shower. ( ABS Body & Face Plate Chrome Plated) complete all as specified and directed.( Make: Jaquar CAT OHS-CHS-1757).

S&F in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed.

S & F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and directed

Supply & fix in repair glass shelve type complete all as specified and directed (Make : Jaquar cat :AQN-CHR-7771)

Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed.

Taking down CI/PVC/AC soil pipe with fittings from wall, treches of any description including fittingscomplete all as specified and directed.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F of 100 mm bore cast iron bend/TEE (any Radius) diminishing pieces or tapers (Large bore measured) complete all as specifed and directed.

S&F of 100 mm bore cast iron branch pipe , single (equal or unequal), ordinary or inverted (Spigot or Socket type ) or with parallel branches complete all as specied and directed.

S&F of 75 mm bore cast iron bend (any Radius) diminishing pieces or tapers (Large bore measured) complete all as specifed and directed.

S&F of 75 mm bore cast iron cast iron cowls complete all as specifed and directed.

Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site complete all as specified and directed

Taking down chowkat with shutter n. exc. 1.5sqm each (without taking off shutter from the Frame) complete all as specified and directed

M&L pressed steel frames of size 125x60 mm for door with one or more rebates incl necessary fittings, lugs, hinges, lock strike plate, flat iron hold fast etc complete as specified & as directed.

M&L pressed steel frames of size 105x60 mm for door with one or more rebates incl necessary fittings, lugs, hinges, lock strike plate, flat iron hold fast etc complete as specified & as directed.

S&F mild steel angle iron work as in doors, door frames, chajja hollow square sections conforming to 410W(Gde E-250) quality-A including fixing of holdfast and hinges complete all as specified & directed.

S&F factory made 35 mm flush shutter, solid coare construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed.

S&F Factory made wire gauze PVC door shutter door shutter 30mm thicki.e pannel will be wire gauzed in lieu of wood grain printed PVC sheet. the wire gauze shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tubes .The wire gauze shall be stretches to tighten firmlyl (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; 5 mm thick x 15mm wide PVC sheet beading used inside stiles and rail decorative PVC beading of 10mm x10mm (90Deg) used instead of exposed portion of PVC sheet beading supplying & fixing in the frame at site as per specification & drawing.

S & F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed.

S&F 200 mm long Aluminium anodised barrel tower bolts complete all as specified and directed

S&F 150 mm size aluminium anodised door handles complete all as specified and directed

M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F 300 mm ordinary mild steel rat tail rod pattern spring incl roller and roller plate complete all as specified and directed.

M&L for preparation of new wooden surface of any description n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed

S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specification and drawing complete all as specified and directed

S&F in repairs 18 mm (+ 0.7 mm) thick, solid PVC sheet one side prelam sheet for cupboard shutter of density 600 Kg/Cbm bent 900 and finish at all edges at level for making egdes at level for making edge lipping/bending or 0.5 mm thick PVC sheet lipping at 4 edges using bonding tape etc complete all as per direction complete all as specified and directed

S & F MS Auto hinges of crank 0 degree & 90 degree, fixed with screws to timber frame complete all as specified and as directed.

S&F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed.

S&F 125 mm long Aluminium anodised barrel tower bolts complete all as specified and directed.

S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-B (18 mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle with or without opeing for AC complete all as specified and directed

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and directed.

S & F of mild steel work such as window guard bars and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed.

S&F in repair repair 25 mm dia drapery rod fancy powder coated fixed to wall with bracket & knobs complete all as specified and directed.

M&L for preparation of new/old steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F 100 mm size aluminium anodised door handles complete all as specified and directed

M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as directed.

Dismantling wooden framed work i.e fillets ,rails, posts rafters, purlins etc under 40 sq.cm in section complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E- 165)complete all as specified and directed.

S&F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed

S&F of 75 mm bore cast iron branch pipe , single (equal or unequal), ordinary or inverted (Spigot or Socket type ) or with parallel branches complete all as specied and directed.

S & F Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed

Treating the soil under plinth protection/floor at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

M & L Point wiring for one light/fan point controlled by one modular switch, one way, 1 module by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC casing & capping with all accessories/fittings, modular metal flush box, modular white cover plate with frame fitted with screws, washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire as common earth and make wall/panel surface as existing same colour and making good disturbed surfaces of walls, panels, floors, etc. to match with the existing complete all as specified and as directed.

M & L for Point wiring one 15/16 amps socket point controlled by one modular switch, 1 module one way switch, by using 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLS unsheathed cables in and including in PVC casing & capping with all accessories/fittings, modular metal flush box, modular white cover plate with frame fitted with screws, washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire as common earth and make wall/panel surface as existing same colour and making good disturbed surfaces of walls, panels, floors, etc. to match with the existing complete all as specified and as directed.

S & F Modular switch 1 way 6A, 1 module complete all as specified and as directed.

All as per Sl item No 107 above but for one modular socket outlet point 6 Amps on independent board controlled by one, one way switchcomplete all as specified and directed.

All as per Sl item No 107 above but for one socket outlet point 6 Amps on the same baord with other switches complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and as directed.

S&F Modular switch socket combination 3 pin 6 Amps flush type controlled by one, one way switch complete all as specified and directed.

S&F Modular switch socket combination 3 pin, 16 Amps, flush type, complete all as specified and as directed.

S&F Madular Fan step regulator, 120W complete all as specified and as directed.

Ceiling rose, Pilot 3 Plate ceiling rose 5/6A ,complete all as specified and as directed.

S&F Modular Bell push flush type 6 Amp valid CML No complete all as specified and directed.

S&F Ding dong Bell AC single Pole 230 Volts complete all as specified and directed.

S&F Lamp Holder PVC/ polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F LED bulb 14 watt all as specified and directed complete all as specified and directed

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to light fittings complete all as specified and directed.

Supply and fixing in repair ceiling fans complete with 3 blades, down rods, regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM complete all as specified and directed. (Note : Old ceiling Fan to be deposited in MES store yard for repair)

Supply and fix in repair exhaust fan in repair made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of swee250mm complete all as specified and directed.

Supply and fix in repair electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, clamp etc all as specified and directed. (Note : Old electric water heater to be deposited in MES store yard for repair)

S&F distribution box epoxy powder coated, SPN 8 way, 240 V, with 200 amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door as in replacment ,complete all as specified and directed.

S&F 415V, 10KA 'C' curve MCB TPN 40 to 100 Amp and current carrying capacity in the DB Complete with connection, testing and commissioning.

Supply & fix in repair MCB SPN capacity 32 amp, 'C' series , complete all as specified and directed.

S &F MCB SP 6 to 32 Amps, 240 Volts of 'B' series to be housed in DBs and suitable size cable lugs to be fixed with MCBs as in replacment, complete all as specified and directed.

Supply & Fixing LED street/bldg light fitting luminaire 35 Watt IP-65/66, 230 volts, new generation energy saving & enviormental friendly long life versatile pressure die cast aluminium roadway luminarie with high power LEDs as light source and electronic driver alongwith suitable bracket required as per site for fixing the light complete all as specified & directed.

Supplying ,Laying , jointing and testing XLPE insulated, armoured, heavy duty, LT aluminum conductor cable 1100 volts grade of size 25 Sqmm, 4 core laid in trenches/ducts, floors, fixed to walls etc complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth in hard/dense soil for laying of cable/ GI pipe and getting out complete all as specified and directed.

Returning, filling in including spreading levelling watering well ramming in layers not exceeding 25cm each complete all as specified and directed.

Material and labour for dry clean river sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I and as directed. Note :- Only compacted thickness of sand will be measured and paid separately.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type 1, flat as per size 250mm x 150mm x 40mm for LT cable and laid dry in trenches over underground cables complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanised iron wire 4mm dia as earthing lead , (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2020) complete all as specified & directed. (NOTE: Earth strip and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc will be measured & paid separately)

Disconnecting and taking out old existing steel/PVC tubing and connections of any description/ grade and in any position in trenches/under floors / on walls etc including all fittings/accessories and fixtures such as bends, union, elbow socket, valves, taps etc, all as directed and specified for 25 mm dia pipe complete all as specified and directed. (Note :- Excavation & earth work shall be measured and paid for separately under respective item of Sch 'A'.)

Supply and Fixing in any length UPVC pipe 25 mm dia pipe manufactured as per ASTM-D-1785 as per IS-559, Schedule-40 complete with all fittings,connections, laid in trenches/wall in required length complete all as specified and directed.

S & F in repair UPVC Ball valves with operating handle (stop valve) of size 25 mm dia complete suitable for fittings with ASTM - 1785, Schedule 40 UPVC pipes complete all as specified and as directed.

Cutting existing steel/ UPVC tubing of any size for alterations, additions or insertions of new GI/CI/ UPVC pipe of size 25mm dia complete all as specified and directed.

AADESH CONSTRUCTION (BID ID -3198219)

Abhishek Enterprises (BID ID -3200592)