Automation of 8 MLD WTP, Zonal reservoir and other ancillary works of Nabarangpur Municipality under State Plan, D.No.13-4215 SUJALA for the Year 2025-26

(Part-A) Construction of ESR 9.00 Lakhs Ltr 25Mtr Height Zone-IV

Design, construction, testing and commissioning of ESR all complete as per direction of EIC. Zone-IV (ESR 25Mtr Height)

(Part-B) Automation of 8.00MLD at Nabarangpur.

Intake: - PLC panel for Row water pump House with two Pumps. Design, manufacture, supply,installation, testing and commissioning of indoor type PLC panel of size approx. 1000 mm X 700 mm X 1500mm (LBH), fabricated out of min.2 mm thick CRCA sheet powder coated to Siemens gray color. The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration. The PLC shall be programmed with IEC 61131 standards for control, monitoring and communication of equipments & instruments at Raw water Pumphouse. PLC shall have Ethernet port & protocal for Modbus TCP communication with following IO. DI –16 num , AI –16 num, AO – 8 num, 7 inch color TFT HMI complete. with programming shall be provided to interact with PLC. The panel shall include all the accessories (not limited to following) to achieve purpose of smooth & trouble free operation of pump house. MCB 10A DP - 1 num MCB 4A DP - 4 num, 24 VDC Power Supply 10A- 1 num Push Buttons - 7 num

WTP Automation

Electric Valve Actuator only for non-rising spindle type sluice valve of PN1 & PN1.6 valve totall enclosed weather proof construction with IP67 protection, Motor Working on 440 VAC

Starter Panel For Actuator consists of 10-14A MPCB, 16A Contractor, MCB, LED Lamp, Terminal, Cable and Other Ascessories etc

PLC with HMI for sand filter ( with 4 Filter beds )

Suppply Instaallation Testing Programing wiring and Commissoning OF PLC Indoor Panel Made out of 2MM C.R Sheet of Size 800MM*1000MM*2100MM floor mounted duely Powder Coted 7 Tank Process With Folowing Componet i.e CPU Should Have 1MB Programe Memory 4.5 MB data,12MB Memory card ,communication module 32 slave,,Bus adapter Redudanant type 24V DC,SMPS10 amp alog with 24v dc SPD, I/O count as 60DI,30 DO,12AI,16AO having 1ms per chanell conversation /sampling time .ambient air tepmrature upto 55 degree celcious with having 2 ethernate usb host & device24 v dc make (Seimens,Schnider). 4G ethernate TCP/IP-MDBUS relay bord 32 chanel 1 no,glass fuse blown indicator type 120 no,terminal block for DI,DO(make wago.phoinix contact)media converter( Tp link or euivalent), controll transformer 1 no 2/4/6 Amp Mcb with complete scada progrming with 200 tag license

Supply, Installation & Commissioning of SCADA software (Make-Schiender/Simens/Drite) with Graphical processor visualization Advanced alarm management, historical and Real time trending, Built-in-reporting,Stastical process control, Multithreaded citect VBA and Cicode programming language with 512 Tag SCADA Software (Make- Schneider, Siemens),Preparation of P&I diagram, Creation of Multi visualization screen for Process control,alarm managenent, Historical and realtime process trend, Daily reporting etc complete as per requirement & direction of Engineer - in - Charge (Including license key)

Supply Installation Commissioning, SCADA PC i5\12th Gen\8GB\1TB\WIN11\24" Display Professional all complete as per direction of engineer in-charge

Supply installation testing Commissioning of 43" LED TV for SCADA PC extension of operator all complete as per direction of engineer in-charge

Supply, Installation, Testing & Commissioning of 1KVA Online UPS with external battery type, Having Double conversion IGBT based online UPS system with 65 AH Battary 3 Nos, Input 150-250VAc 1Phase,50Hz, output: 230 VAC,1Phase,50Hz. . All completed as per electrical specification and as per direction of EIC.

Designing, Supplying, installing, commissioning & testing of Ultrasonic level transmitter CE marked at each filter bed with following technical parameters Interfacing with PLC panel including mounting arrangement. Range- 0 - 5 mtrs output-4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED Enclosure- IP 68 Make=E&H/ABB/VEGA

Supply of Designing, Supplying, Installing, commissioning & testing of pressure transmittern CEnmarkd with following technical parametersat Rawn Watern Pump Houseand Interfacing with PLC panel including Mountingn arrangement. Output 4-20 mA / HART ,Power supply - 24V DC ext.,Display - 4" LED, Accuracy-+/-0.1%offullscale Accuracy-+/-0.1%offullscale or better, Enclosure- IP 68

Supply, installation of chemical earthing with crystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag – 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all complete as per the site requirement.

Design, Supply, Installation, Testing&calibration of open chanel type ultrasonic flow Transmitter CE marked with followingtechnicalparametersat Raw Water channel and Interfacing with PLC panel including mounting arrangement (Range- 0 - 5 mtrs ,Output-4-20 mA / HART, Power supply - 24V DC ext., Display - 4" LED, Accuracy-+/-0.25%of Full Scale or better, Enclosure- IP 68

Suppl and Installation of LOH(Loss of Head) Indicator & ROF(Rate of Flow) Indicator with display unit, 230 VAC Power Suppl and 4-20 mA Output

Supply and Installation of water quality analyser with mounting bracket and required cable, (A) PH Analyzer 0-14 (B) Turbudity Analyzer, 0 to 4000 NTU,, Raw Water, Before Filter Bed, Clear Water Make - Forbe Marshal/ABB/E&H/Hach/Horiba/Microset/Drite

Chlorine Analzer 0-8 PPM Make - Forbe Marshal/ ABB/ E&H/ Hach/ Horiba/ Microset/ Drite

Instrumentation, control and power XLPE cables along with the cable tray, glands, lugs and other accessories for interfacing the instruments at remote station with the RTU as per the technical specifications of Power Cable

Power Cable -ditto-4 core 4 mm2 copper cable

Control Cables-ditto- 3 core 1.5 mm2 copper cable

Control Cables-ditto- 6 core 1.0 mm2 copper cable

Control Cables-ditto- -20 core 1.0 mm2 copper cable

Instrument Cable- ditto- 2 Pair 1.0 mm2 cable

OFC: Supply and Laying of 12 core unarmoured Optical fibre cable ( OFC. Fiber glass with F-G 62.5/125micron, 2.6DB/KMF600) to various sites through HDPE pipe /in Air ( pole to pole ), prelaying testing of each cable drum for each fibre and tahing the OTDR traces,submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/Site Engineer.

HDPE PIPE: Supply and Laying of 40MM (8Kg/cm2)dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.(excluding earth work)

Supply & installation of industrial Hooter for emergency situation like (over flow of water & contamination of water) and duly programmed with PLC logic etc.

Supplying& Installation of DG set with RCC Foundation, DG set Sheet Shed with pipes ,Chemical Eathing-4 nos & Aluminium power cable of Required Length as per Dg KVA Rating & Type and Control Cable for AMF DG Set Of Required Length . This Includes Tranportation to the site , Trall Run with Required Amount of Disel, Commissioning, Changeover and Anyother Instraction as per Direction of Engineer -in- Charge.

Provision for Chlorine Gas Leak Detection system Chloro scrub) at 8 MLD WTP Nabarangpur.

Design & Construction of PLC & SCADA Room at WTP

(Part-I) Operation and Maintenance Operation & maintenance of PH installation for five years as per scope of work and technical scope and direction of Engineer-in-charge (Excluding cost towards chemicals and energy charges)

Please Enable Macros to View BoQ information