Electrical And Mechanical Items Supply And Established Work Of Pudkuni Group Of Village Pumping Water Supply Scheme Under Jal Jeevan Mission In Block-Kapkot District-Bageshwar

Amount

IPS-1 Supply of electric driven horizontal multistage I.S.I. marked centrifugal clear water pump capable of delivering 340 LPM discharge, against a total head of 470 mtr complete with coupling and coupling guards at IPS-1

Supply of suitable capacity 60 H.P. squirrel cage / TEFC electric motor suitable to operate on 415±10% volts three phase, 50 Hz A.C. supply.

Supply of M.S. fabricated heavy duty base plate for mounting above pump and motor.

Supply of 75 HP Oil cooled fully automatic auto transformer starter suitable to control above motor with over load and under voltage protection (with trasnformer Oil)

Supply of dust and vermin proof cubical type floor mounting type control panal made out of 14/16 SWG sheat having bus barbar chamber with copper bus bar comprising of following

Incoming- 1 No

200 amp manually operated MCB complete with protection – 01 No

Phase indicating lamp complete with instruments fuses and toggle switch-01 set

Frequency meter 100 mm dial

P.F. meter 100 mm dial

ON/OFF indicator 1set

KWR meter – 1 no

IDMT relay – 01 No

OUTGOING- 2 Nos

200 amp M.C.B. manually operated complete with protection – 01 No

Digital voltmeter 0-500 v – 02 No

Digital Ammeter 0-200 Amp – 02 No

LT power capacitor of suitable rating – 02 No

Single phase preventor-02 nos

32 AmpM.C.C.B. for light and fan- 1 no

Earth Fault relay- 02Nos

Hour counter meter- 02 Nos

Phase indicating lamp complete with instruments , fuses and toggle switch – 02 set

Power wiring and Earthing Materials

Supply of 50 mm2 3 core copper conductor armoured PVC sheathed cable of 1.1 KV grade in multi run. 50 Mtr

Supply of 70 mm2 3.5 core aluminum conductor armoured PVC sheathed cable of 1.1 KV grade in multi run. 30 Mtr

Supply of jointing material like luggs tape as required etc 01 Set

Complete double earthing of all the electrical equipments with earthing materials such as earth plate, earth strips , coal, salt etc required as per IE rules 01 Set

Main Piping and Valves -

Suction side

CI/DF sluice valve of size 100 mm with hand wheel P.N.1.6– 02 No

CI/DF bend 90°, 100 mm dia – 02 No

M.S./DF Taper size pump inlet x 100 mm dia – 02 No

M.S/DF pipe 100 mm size 8.00 mm thickness in 3.00 mtr length- 04 No

100 mm dia M.S. flange of 20 mm thickness- 12 No

Delivery Side

Cast steel gate valve 80 mm size of class 600ASA-02 No

Cast Steel DF swing check valve 80 mm size of class 600 ASA -02 No

M.S./DF enlarger pump outlet 80mm – 02 No

M.S./AF Radial tee size 80x80x80mm – 02 No

Blind flange 80 mm size- 02 No

MS/DF distance piece 80 mm size in 3mtr length -01 No

MS/DF distance piece 80 mm size in 1.5 mtr length -03 No

80mm dia M.S. Flange of thickness of 20 mm -12 No

Nuts and bolts , rubber / fiber packing for jointing above pipes and sepcials. 1 set

CI/DF bend 90 degree 80 mm size – 02 No

MS/DF Taper size pump outlet x80mm-02 No

By Pass Arragement

Cast Steel/ DF swing check valve 80 mm size of class 600 ASA -01 No

Cast steel gate valve 80 mm size of class 600ASA-02 No

MS/ AF Tee size 80mmx80mmx80 mm-01 No

Nuts and bolts , rubber / fiber packing for jointing above items. 1 set

CI/DF bend 90 degree 80 mm size – 01 No

Gauges

Supply of 100 mm dial pressure gauge with control cock and fittings of range 0-60 kg/cm2 -02 no

Supply of 100 mm dial compound gauge with control cock and fittings 0±1 kg/cm2 - 02 Nos

Supply of following tools required for maintenance of pumping plants

DE spanner set 1 set

Ring spaner set- 1 set

Screw driver- 02 No

Pliers- 01 No

Hammers - 1 No

Pipe wrinch 14''- 1 No

Screw wrench -1 No

Tong tester-1 No

Crimping tool (hydraulic type)-1 No

Coupling puller - 1 No

Bearing puller-01 No

Steel Almirah (5 1/2’x33’’x19’’) -01 No

Plastic table (3’x2’x2.5’’)

Plastic chair -4 No

Wall clock – 1 No

Data chart board- 1 No

Chainpully block ISI marked 3.0 ton

Supply of rubber resistance sheet of size 1mx2mx0.025 m

Installation and commissioning of pumping plants with all accesories inside the pump house but without civil work such as laying of foundation cable trenches etc.

Testing of pumping plants against guaranteed figure of schedule E

At work

At site

Maintanence for stabilized the whole system

Painting of entire installation with 2 coats of super enamel paints as per direction of engineer in charge of works.

Internal and external electrification of pump house

ISI marked Servo control voltage stabilizer 125 K.V.A. suitable for regulation incoming voltage 300 to 480 voltage outgoing voltage 415 volt with 250 amp change over switch and 35 mm2 3.5 core copper cable first filling of transformer oil and complete installation.

Carriage of pumping plants and all accessories from store to site of work including head load charges from road site to site of work as required material cost i.e. sub total A

Insurance of all materials and complete works (contract bond value) from the supply of materials and transition freight to store.

IPS-2 Supply of electrically driven horizontal multistage I.S.I. marked centrifugal clear water pump capable of delivering 200 LPM discharge, against a total head of 560 mtr complete with coupling and coupling guards at IPS2

Supply of suitable capacity 40 H.P. squirrel cage / TEFC electric motor suitable to operate on 415±10% volts three phase, 50 Hz A.C. supply.

Supply of M.S. fabricated heavy duty base plate for mounting above pump and motor.

Supply of 60 HP Oil cooled fully automatic auto transformer starter suitable to control above motor with over load and under voltage protection (with trasnformer Oil)

Supply of dust and vermin proof cubical type floor mounting type control panal made out of 14/16 SWG sheat having bus barbar chamber with copper bus bar comprising of following

Incoming- 1 No

160 amp manually operated MCB complete with protection – 01 No

Phase indicating lamp complete with instruments fuses and toggle switch-01 set

Frequency meter 100 mm dial

P.F. meter 100 mm dial

ON/OFF indicator – 1 set

KWR meter – 1 no

IDMT relay – 01 No

OUTGOING- 2 Nos

M.C.B. 200 amp manually operated complete with protection – 01 No

Digital voltmtr 0-500 v – 02 No

Digital Ammtr 0-200 Amp – 02 No

LT power capacitor of suitable rating – 02 No

Single phase preventor-02 nos

32 Amp MCCB for light and fan- 1 no

Earth Fault relay- 02Nos

Phase indicating lamp complete with instruments , fuses and toggle switch – 02 set

Power wiring and Earthing Materials

Supply of 35 mm2 3 core copper conductor armoured PVC sheathed cable of 1.1 KV grade in multi run. 50 Mtr

Supply of 50 mm2 3.5 core aluminum conductor armoured PVC sheathed cable of 1.1 KV grade in multi run. 30 Mtr

Supply of jointing material like luggs tape as required etc- 01 Set

Complete double earthing of all the electrical equipments with earthing materials such as earth plate, earth strips , coal, salt etc required as per IE rules 01 Set

Main Piping and Valves -

Suction side

CI/DF sluice valve of size 100 mm with hand wheel P.N.1.6– 02 No

CI/DF bend 90°, 100 mm dia – 02 No

M.S./DF Taper size pump inlet x 100 mm dia – 02 No

M.S/DF pipe 100 mm size 8.00 mm thick in 3.00 mtr length- 04 No

100 mm dia M.S. flange of 20 mm thick- 12 No

Delivery Side

Cast steel gate valve 80 mm size of class 600ASA-02 No

Cast Steel DF swing check valve 80 mm size of class 600 ASA -02 No

M.S./DF enlarger pump outlet 80mm – 02 No

M.S./AF Radial tee size 80x80x80mm – 02 No

Blind flange 80 mm size- 02 No

MS/DF distance piece 80 mm size in 3mtr length -01 No

MS/DF distance piece 80 mm size in 1.5 mtr length -03 No

80mm dia M.S. Flange of thickness of 20 mm -12 No

Nuts and bolts , rubber / fiber packing for jointing above pipes and sepcials. 1 set

CI/DF bend 90 degree 80 mm size – 02 No

MS/DF Taper size pump outlet x80mm-02 No

By Pass Arragement

Cast Steel/ DF swing check valve 80 mm size of class 600 ASA -01 No

Cast steel gate valve 80 mm size of class 600ASA-02 No

MS/ AF Tee size 80mmx80mmx80 mm-01 No

Nuts and bolts , rubber / fiber packing for jointing above pipes and sepcials. 1 set

CI/DF bend 90 degree 80 mm size – 01 No

Gauges

Supply of 100 mm dial pressure gauge with control cock and fittings of range 0-60 kg/cm2 -02 no

Supply of 100 mm dial compound gauge with control cock and fittings 0±1 kg/cm2 - 02 Nos

Supply of following tools required for maintenance of pumping plants

DE spanner set 1 set

Ring spaner set- 1 set

Screw driver- 02 No

Pliers- 01 No

Hammers - 1 No

Pipe wrinch 14''- 1 No

Screw wrench -1 No

Tong tester-1 No

Crimping tool (hydraulic type)-1 No

Coupling puller - 1 No

Bearing puller-01 No

Steel Almirah (51/2’x33’’x19’’) -01 No

Plastic table (3’x2’x2.5’’)

Plastic chair -4 No

Wall clock – 1 No

Data chart board- 1 No

ISI marked H.O.T. crane of 3 tonne capacity including gantry, girder , cross girder, chain pully block etc as required

Supply of rubber resistance sheet of size 1mx2mx0.025 m

Installation and commissioning of pumping plants with all accesories inside the pump house but without civil work such as laying of foundation cable trenches etc.

Testing of pumping plants against guaranteed figure of schedule E

At work

At site

Maintanence for stabilized the whole system

Painting of entire installation with 2 coats of super enamel paints as per direction of engineer in charge of works.

Carriage of pumping plants and all accessories from store to site of work including head load charges from road site to site of work as required material cost i.e. sub total A

ISI marked Servo control voltage stabilizer 80 K.V.A. suitable for regulation incoming voltage 300 to 480 voltage outgoing voltage 415 volt with 200 amp change over switch and 35 mm2 3.5 core copper cable first filling of transformer oil and complete installation.

Internal and external electrification of pump house

Insurance of all materials and complete works (contract bond value) from the supply of materials and transition freight to store.

MPS Supply of electrically driven horizontal multistage I.S.I. marked centrifugal clear water pump capable of delivering 340 LPM discharge, against a total head of 465 mtr complete with coupling and coupling guards at M.P.S.

Supply of suitable capacity 60 H.P. squirrel cage / TEFC electric motor suitable to operate on 415±10% volts three phase, 50 Hz A.C. supply.

Supply of M.S. fabricated heavy duty base plate for mounting pump and motor.

Supply of 75 HP Oil cooled fully automatic auto transformer starter suitable to control above motor with over load and under voltage protection (with trasnformer Oil)

Supply of dust and vermin proof cubical type floor mounting type control panal made out of 14/16 SWG sheat having bus barbar chamber with copper bus bar comprising of following

Incoming- 1 No

200 amp manually operated MCB complete with protection – 01 No

Phase indicating lamp complete with instruments fuses and toggle switch-01 set

Frequency meter 100 mm dial

P.F. meter 100 mm dial

ON/OFF indicator – 1 set

KWR meter – 1 no

IDMT relay – 01 No

OUTGOING- 2 Nos

M.C.B. 200 amp manually operated complete with protection – 01 No

Digital voltmtr 0-500 v – 02 No

Digital Ammtr 0-200 Amp – 02 No

LT power capacitor of suitable rating – 02 No

Single phase preventor-02 nos

M.C.B. 32 Amp for light and fan- 1 no

Earth Fault relay- 02Nos

Hour counter meter- 02 Nos

Phase indicating lamp complete with instruments , fuses and toggle switch – 02 set

Power wiring and Earthing Materials

Supply of 50 mm2 3 core copper conductor armoured PVC sheathed cable of 1.1 KV grade in multi run.- 50 mtr

Supply of 70 mm2 3.5 core aluminum conductor armoured PVC sheathed cable of 1.1 KV grade in multi run.- 30 mtr

Supply of jointing material like luggs tape as required etc - 1 set

Complete double earthing of all the electrical equipments with earthing materials such as earth plate, earth strips , coal, salt etc required as per IE rules - 1 set

Main Piping and Valves -

Suction side

CI/DF sluice valve of size 100 mm with hand wheel P.N.1.6– 02 No

CI/DF bend 90°, 100 mm dia – 02 No

M.S./DF Taper size pump inlet x 100 mm dia – 02 No

M.S/DF pipe 100 mm size 8.00 mm thick in 3.00 mtr length- 04 No

100 mm dia M.S. flange of 20 mm thick- 12 No

Delivery Side

Cast steel gate valve 80 mm size of class 600ASA-02 No

Cast Steel DF swing check valve 80 mm size of class 600 ASA -02 No

M.S./DF enlarger pump outlet 80mm – 02 No

M.S./AF Radial tee size 80x80x80mm – 02 No

Blind flange 80 mm size- 02 No

MS/DF distance piece 80 mm size in 3mtr length -01 No

MS/DF distance piece 80 mm size in 1.5 mtr length -03 No

80mm dia M.S. Flange of thickness of 20 mm -12 No

Nuts and bolts , rubber / fiber packing for jointing above pipes and sepcials. 1 set

CI/DF bend 90 degree 80 mm size – 02 No

MS/DF Taper size pump outlet x80mm-02 No

By Pass Arragement

Cast Steel/ DF swing check valve 80 mm size of class 600 ASA -01 No

Cast steel gate valve 80 mm size of class 600ASA-02 No

MS/ AF Tee size 80mmx80mmx80 mm-01 No

Nuts and bolts , rubber / fiber packing for jointing above items. 1 set

CI/DF bend 90 degree 80 mm size – 01 No

Gauges

Supply of 100 mm dial pressure gauge with control cock and fittings of range 0-60 kg/cm2 -02 no

Supply of 100 mm dial compound gauge with control cock and fittings 0±1 kg/cm2 - 02 Nos

Supply of following tools required for maintenance of pumping plants

DE spanner set 1 set

Ring spaner set- 1 set

Screw driver- 02 No

Pliers- 01 No

Hammers - 1 No

Pipe wrinch 14''- 1 No

Screw wrench -1 No

Tong tester-1 No

Crimping tool (hydraulic type)-1 No

Coupling puller - 1 No

Bearing puller-01 No

Steel Almirah (51/2’x33’’x19’’) -01 No

Plastic table (3’x2’x2.5’’)

Plastic chair -4 No

Wall clock – 1 No

Data chart board- 1 No

Chainpully block ISI marked 3.0 ton

Supply of rubber resistance sheet of size 1mx2mx0.025 m

Installation and commissioning of pumping plants with all accesories inside the pump house but without civil work such as laying of foundation cable trenches etc.

Testing of pumping plants against guaranteed figure of schedule E

At work

At site

Maintanence for stabilized the whole system

Painting of entire installation with 2 coats of super enamel paints as per direction of engineer in charge of works.

Internal and external electrification of pump house

ISI marked Servo control voltage stabilizer 125 K.V.A. suitable for regulation incoming voltage 300 to 480 voltage outgoing voltage 415 volt with 250 amp change over switch and 35 mm2 3.5 core copper cable first filling of transformer oil and complete installation.

Carriage of pumping plants and all accessories from store to site of work including head load charges from road site to site of work as required material cost i.e. sub total A

Insurance of all materials and complete works (contract bond value) from the supply of materials and transition freight to store.

INFILTRATION WELL Supply of submersible Raw water pumping plant capable of 340 L.P.M. cold and clear water againts total head of 80 mtr directly coupled to a submersible motor of 10 H.P. suitable to operate on 415±10% volts three phase 50 C/S A.C. ( supple complete with non return valve) at Infiltration well

Supply of 15 H.P. floor mounted type fully automatic star delta starter suitable to operate on 400/440 volt , three phase .50A.C. with over load relay & over / under volatage protection

Supply of 63 Amp three phase main switch with neutral link

Supply of dust and vermin proof cubical floor mounting type control panel made out of 14 SWG sheat steel having bus bar bar comprising of following one no incoming and two nos of outgoings

Incoming- 1 number

MCCB 63 amp ( adjustable type) with shunt trip microprocesor release heavy over current earth fault short circuit protection and under voltage release – 01 no

Phase indicating lamp complete with instruments fuse and switch-01 no

Switch relay for automatic ON/OFF for panel for power supply- 01 No

IDMT relay – 01 No

OUTGOING-2 numbers

MCCB 63 amp ( adjustable type) with shunt trip microprocesor release heavy over current earth fault short circuit protection and under voltage release – 02 no

LT power capacitor bank of suitable capacity to improve power factor – 02 No

Hour counter meter- 02 Nos

Phase indicating lamp complete with instrument , fuses and toggle switch – 02 set

Single phase preventor-02 nos

M.C.B. 32 Amp for light power point and fan - 1 No

Power wiring and Earthing Materials

Supply of 10 mm sq 3 core P.V.C. insulated copper conductor submersible cable - 60 mtr

Supply of 35 mm sq 3.5 core aluminum conductor armoured P.V.C. sheathed cable of 1.1 KV grade- 30 mtr.

Supply of 16 mm sq 3.5 core aluminum conductor armoured P.V.C. sheathed cable of 1.1 KV grade-40 mtr

Supply of jointing material like. lugs tapes as required etc

Complete double earthing of all the electrical equipments with earthing materials such as earth plate, earth strips , coal, salt etc required as per IE rules

Main Piping and Valves

100 mm M.S. column pipe assembly having 7.1 thick mm both ends socketed in 3.00 mtr length – 06 No

100 mm dia M.S. Top column pipe assembly having 7.1 thick mm one end threaded and one end with flange welded in 3.00 mte length- 02 No

M.S. reducer pump outlet size x 100 mm dia – 02 No

MSD/F bend 90° 100 mm dia – 02 No

100 mm dia cast iron D/F gate valve with hand wheel of class P.N. 1.6 – 04 No

100 mm dia cast iron D/F swing check valve of class P.N. 1.6 – 03 No

100 mm dia MSD/F distance piece as per site requirement – 01 set

100 x100 x100 mm dia MSD/F Radial Tee- 03 No

100 mm dia M.S. blind flange- 01 No

Nuts , bolts, rubber /fiber packing for jointing above pipes & specials 1 lot

Gauges

Supply of 150 mm dial pressure gauge with control cock and fittings of range 0-20 kg/cm2 -02 No

Supply of 150 mm dial depth gauge direct reading type complete with airline and fittings – 02 No

Supply of following tools required for maintenance of pumping plants

DE spanner set- 1 set

Ring spanner set- 1 set

Screw driver- 02 No

Insulation Plier- 01 No

Hammer 2KG with handle -1 No

Pipe wrench suitable size- 1 No

Screw wrench -1 No

Crimping tool-1 No

Tong tester-1 No

Chain wrench suitable size-2 No

Supply of ISI marked chain pulley block of 3 ton capacity 6 mtrs. Lift complete with travelling trolley.

Supply of rubber resistance sheet of size 1mx2mx0.015m

Fire Extenguisher 6kg, 2 nos Co2 and 2Nos ABC

Supply of material for Pump House

Steel Almirah (51/2’x33’’x19’’) -01 no

Plastic table (3’x2’x2.5’’)

Plastic chair -4 nos

Wall clock – 1 no

Data chart board- 1 no

Installation and commissioning of pumping plants with all accessories inside the pump house but without civil work i.e. laying of foundation cable trenches etc.

Testing of pumping plants against figure of schedule E

At work

At site

Painting of entire installation with 2 coats of super enamel paints as per direction of engineer in charge of works.

Internal and external electrification of pump house

Cartage of pumping plants and all accessories from store to site of work including head load charges from road site to site of work as required.

Insurance of whole worls (including all materials ) for transit, storage, re shipment to site, erection / commissioning from the start date the end of the defects liability period and personal injury and death which are due to contractors risk.

Labour engaged in operation and maintenace of all stages of scheme for 6 months

Pump operator

Chowkidar

Electrician

Mechanic

Supra Electrical

GOPAL DUTT

Kamal Traders