Construction of Clinic Animal Husbandary Building and V.O. Quarter (Class II, “D” Catagory) at Village Adhoi, Ta. Bhachau, Dist. Bhuj-Kachchh

Excavation for foundation upto 1.50mt.Depth including sorting out and stacking of useful materials

1 and disposing of the excavated stuff as directed with in all lead & Lift (A) Loose or Soft soil. 349.00 Cu.m 122.94

Excavation for foundation upto 1.50mt.Depth including sorting out and stacking of useful materials

2 and disposing of the excavated stuff as directed with in all lead & Lift (B) Dense or Hard soil. 129.00 Cu.m 157.33

Excavation for foundation 1.50mt. to 3.0 mt. depth including sorting out and stacking of useful

3 materials and disposing of the excavated stuff as directed with in all Lead & Lift (C) Hard Murrum 305.00 Cu.m 287.21

Filling foundation and plinth with sand under floors including watering, ramming and consolidating

4 dressing etc, comp. 76.00 Cu.m 481.80

Filling available excavated earth excluding rock in trenches plinth side of foundation etc. in layer not

5 exceeding 20cm. In depth consolidation each deposited layer by ramming and watering. 481.60 Cu.m 136.92

6 watering, ramming and consolidating etc. comp. 81.00 Cu.m 269.75

Applying general insecticide pest control treatment to floors, cupboards etc including labour materials

etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part - II( (0.075% concentration by mass) is

7 recommended 10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical /Sqm of 373.00 Sqm 91.63

surface is recommended as per I.S

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates

8 20 mm nominal size) and curing complete including cost of formwork in (A) Foundation and Plinth 36.00 Cu.m 4033.94

Providing and laying cement concret 1:1.5:3 (1 Cement : 1.5 coase sand : 3 graded stone aggregrate

20mm nominal size) and curing complete exculding cost of form work and reinforcement for

reinforced cement concrete work in (a) Foundation footing base of column and mass concrete

Providing and laying nominal cement concrete M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2 coarse

sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing

complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in

column Upto plinth level.

Providing & laying cement concrete 1: 3 : 6 ( 1 Cement : 3 Coarse sand : 6 graded B.T stone

11 aggregate 20mm nominal size) Curing comp. including cost of form work in foundation and plinth. 56.60 Cu.m 3346.29

Providing and laying nominal cement concrete M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2 coarse

sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing

12 complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in 33.00 Cu.m 8807.56

column for All Floor

Providing and laying nominal cement concrete M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2 coarse

sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing

complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work (c)

PLINTH BEAM

Providing and laying nominal cement concrete M-150 in R.C.C. 1:2 :4 (1 cement : 2 coarse sand :

graded stone agregate 20 mm. Nominal size) including finishing smooth with curing complete

14 including the cost of form work but excluding the cost of reinforcement for R.C.C. work PLINTH 47.40 Cu.m 4336.94

Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1/2 coarse

sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing

15 complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in 34.00 Cu.m 6509.85

BEAMS For All Floor.

Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1/2 coarse

sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing

16 complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in 7.70 Cu.m 7651.12

LINTELS All Floor.

Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1 1/2 coarse

sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing

17 complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in 3.90 Cu.m 6963.77

CHHAJJAS All Floor.

Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1 1/2 coarse

sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing

18 complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in 70.50 Cu.m 6468.21

slabs for All Floor.

Providing and laying nominal cement concrete M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1 1/2 coarse

sand : 3 graded stone agregate 20 mm. Nominal size) including finishing smooth with curing

19 complete including the cost of form work but excluding the cost of reinforcement for R.C.C. work in 4.30 Cu.m 7410.17

staircases for all floor

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing T.M.T. bar FE500/500D reinforcement confirmed to for R.C.C. work including bending,

20 binding, and placing. In position comp. Up to floor two level. For All Floor 49350.00 Kg 77.37

Brick work using common burnt clay building bricks having crushing strength not less than

21 Kg./Sq.m. in foundation and plinth in cement mortar 1:6 (1 cement:6 fine sand) (b) Conventional. 109.00 Cu.m 4214.33

Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./

22 Sqm. in cement mortar 1:6 ( 1 cement : 6 Fine sand ) in super structure above plinth level upto floor 153.50 Cu.m 4504.16

two level ( for G.F ) Conventional

Half brick masonary in common burnt clay building bricks having crushing strength not less than

35kg./sq.cm. in cement mortar 1:3 (1 cement : 3 coarse sand ) with 2nos. of 6mm dia mild steel round

23 bars every three coarse embedded in cement mortar in superstructure for Ground floor 70.00 Sqm 750.76

(Conventional)

Providing and fixing door Double shutter having factory fabricated std. Extruded aluminium colour

anodized hollow section {Section 63.50 x 38 mm x 2.50 mm thick } for door frame, hollow portion

of door frame shall be filled with wood to be insert for durable grip of door hinges, with factory

24 made 38 mm.thick flush door both side pre laminated with 6 Lever Mortice lock , SS Aldrop 30cm 5.00 Sqm 6591.26

long, SS Handle size 15 Cm Long, Tower Bolt size 20 cm etc. as per detail colour & pattern approved

by this office including necessary anodized alluminum fixtures and fastenings.

Providing and fixing door Single shutter having factory fabricated std. Extruded aluminium colour

anodized hollow section {Section 63.50 x 38 mm x 2.50 mm thick } for door frame, hollow portion

of door frame shall be filled with wood to be insert for durable grip of door hinges, with factory

25 made 38 mm.thick flush door both side pre laminated with 6 Lever Mortice lock , SS Aldrop 30cm 19.00 Sqm 4800.53

long, SS Handle size 15 Cm Long, Tower Bolt size 20 cm etc. as per detail colour & pattern approved

by this office including necessary anodized alluminum fixtures and fastenings.

Providing & fixing FRP Frame size100 x 50mm and 28mm think FRP depress pannel shutter having

extra reinforcement on sides ad edges and in gel coat finish. The cores of the shutter is to be filled up

with intected fire extinguishing grade polyurethane wooden pieces for stiffening and also for taking

26 hinges and fixtures. The FRP shutter is to be water proof, weather proof, termite proof and resistance 11.00 Sqm 2377.76

to mild acid / Alkali including S.S hinges with necessary screws and alluminium fixtures and

fastenings & Fastener Sleeve.

Providing and fixing Anodized Alluminum Section Jindal Deluxe Sliding Window System C (20mm)

series sction memebers THREE track window section bottom track 21651, frame top & side

27 shutter frame top rail 20530 & bottom rail 20529, side rail 20544, lock rail 20531 with 5mm thick 42.00 Sqm 3081.51

transparent plain float glass, with transparent silicon sealant with allu. anosized coated fittings and

fixture etc complete.

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm @

Wt 1.094Kg / Rmt with colour Powder Coated alluminium frame with 5 mm thick transparent bronze Sqm

colour tinted float glass as details etc complete for Fix window.

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @

Wt. 0.643 Kg/mt) with colour anodized alluminium frame for ventilation with 5 mm thick frosted

29 glass as details etc complete for Ventilation {Colour as directed by Engineer in charge except black & 4.00 Sqm 1175.56

Alluminum section and glass

Providing and fixing Safty grills of required pattern for windows Rectangular CRC pipes of size 50 x

30 x 2mm at required spacing as per design including fixing rat mesh and hold fasting with coach

30 bolts including one coat of primer and two coats of mattfinished oil painting etc complete. 1360.00 Kgs 114.23

Providing and laying Machine cut, Free edges, Machine polished Granite stone slab 16 to 18 mm

thick {Single piece not more than 150 cm } for stair steps and riser as per design incl. full moulded

31 round front edge & 1 cm nosing & necessary groobe on trade of steps laid on 20 mm thick cement 89.00 Sqm 3185.54

mortar 1:6 (1 -cement : 6 coarse sand ) jointed with grey cement slurry including rubbing and

polishing etc. complete

Providing and laying machine polished machine cut Blue Kota stone slab ( 60 x 45cm Size) flooring

over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

32 Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to 8.00 Sqm 1013.87

match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying 60 x 60cm Soluble Salt Vitrified tiles 8 to 10 mm thick with pattern colour &

Shade as detailed approve by architect ( 10% Dark colour tiles Pattern ) in flooring treads of steps

33 and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand) finishing with 207.00 Sqm 1120.36

flush pointing in white cement.

Providing and laying 60 x 60cm Soluble salt Vitrified tiles 8 to 10 mm thick with pattern colour &

Shade as detailed approve by architect ( 10% Dark colour tiles Pattern ) in skrting risers of steps and

34 dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement 2.00 Sqm 1195.02

Providing and laying 30cm x 30cm in size Mate Finished antiskid Ceramic tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand

) finishing with flush pointing in white cement

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and laying 30 x 60Cm size premium printed glazed tiles 6mm thick in skrting risers of steps

36 and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement 459.00 Sqm 1090.32

Provding and filling the joint with epoxy grout 3 mm width and 8 to 10 mm deep, including cost of

necessary materials, PVC spacers, filling grout and cleaning etc complete as directed by engineer in

charge. { Colour and Pattern as directed by engineer in charge.}

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design

38 Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with 46.00 Sqm 706.93

sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete

Providing and laying water proofing tretment with chaina mosaic tiles flooring over avg 40 mm

C.C. 1:2:4 ( 1 Cement, 2 sand, 1 Kapchi 20mm + 3 grit 6mm to 10mm ) bedding for maintaining

slope for plain and curve surface & 12 mm to 20 mm of broken piece of ceramic / glazed tiles ( one

or more color as directed ) to be laid over cement mortar bedding of C M 1:3 (1 cement : 3 sand )

containg one Kg. of water profing materials per bag of O P C at plain or / and slops and to be Sqm

tempered to bring mortar ceramic up to surface with using white cement and colour pigment

including rounding of junctions and extending them up to 15 cm along the wall and curing with

bends any pattens or design as per drawing and cleaning by using oxalic acid etc complete.

Providing and laying Mirror polished Machine polished Grenite stone slab 16 to 18mm thick for

doors & windows sill & Jams clading as per design including full moulded round front steps & 1cm

40 nosing & necessary groove on trads of steps ;laid on 20mm thick cement mortar 1:6 ( 1 cement : 6 101.00 Sqm 3299.67

coarse sand ) jointed with gray cement sluury including rubbing and polsihing etc. complete.for

Doors / windows sill & jams clading.

Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement :

41 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse 776.00 Sqm 290.69

sand) finished with trovel including scaffolding curing etc. complete. For Ground Floor

Providing and fixing chiken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at junction the

42 Brick.masonary and reinforcement cement concrete member including fixing materials scaffolding 135.00 Sqm 92.92

labour etc. complete

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall

43 surface to give an even shade including thoroughly brushing the surface free from mortar dropping 866.00 Sqm 40.59

and other foreign matter and sand papered smooth.

Wall painting one coats of primer of approved brand (three coats) plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even shade including throughly

44 brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. 491.00 Sqm 126.92

Wall painting one coats of primer of approved brand (three coats) plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even shade including throughly

45 brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. 491.00 Sqm 132.44

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting

of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M.

46 1:1 (1-cement : 1-sand) with 1cm x 1cm groovs as per pattern sample approved by the engineer 953.00 Sqm 315.69

incharge etc. complete.

Providing and fixing 90 cm high Stainless steel railing made from anticorrocive S S pipe of 50 mm

dia (16Gauge) as hand rail with S S 38 mm dia (16Gauge) as a vertical support fixed in RCC slab at

1.2m c/c including three horizontal S S pipes of 25 mm dia (16Gauge) at eqal distance fixed by Rmt

18.75 mm dia (16Gauge) S S pipe including accessories as per detailed drawing as directed etc.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

48 help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings 40.00 Rmt 72.65

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

49 help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings 90.00 Rmt 91.84

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials. [B] 25mm dia.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

50 help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings 30.00 Rmt 148.12

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.[D] 40 mm.

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.[E] 50 mm.

Providing and fixing uPVC Heavy Duty Handle valve of aprroved brand and Quality with required

52 fitting and adhesive incl. fixing the same with new pipe line as directed by engineer in charge. (B) 8.00 Nos 373.70

25mm dia.,

Providing and fixing uPVC Heavy Duty Handle valve of aprroved brand and Quality with required

fitting and adhesive incl. fixing the same with new pipe line as directed by engineer in charge. (C)

40mm dia.,

Providing and fixing uPVC Heavy Duty Handle valve of aprroved brand and Quality with required

fitting and adhesive incl. fixing the same with new pipe line as directed by engineer in charge. (C)

50mm dia.,

Providing, laying and jointing in true line and level 75 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x

55 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as 50.00 Rmt 756.22

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy, complete with special flange compression type fittings, wall

56 clipsetc. including making good the wall ceiling and floor.(A) 110mm dia. 73.00 Rmt 338.95

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x

57 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as 116.00 Rmt 876.90

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x

58 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as 60.00 Rmt 834.38

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing MS Z clamp on Wall or celling for Pipe Fitting including all type necessary

59 fittings and accessory etc. completed as per directed engineer in charge. 206.00 Nos 75.75

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing design with C.I scread down or hinged grating including Nos

the cost of cutting and making good the walls.

Providing and fixing screw down quarter turn heavy duty bib taps of following size (A) Brass

61 chromium plated screw down bib tap (i) 15mm dia. ( Plumber, Mark, Escco or equivalent brand ) 12.00 Nos 186.83

Providing and fixing CP brass Quarter turn pillar tap, capstan head screw down high pressure with

screw, shanks and back nuts (A) 15 mm dia {Jaquar< Plumber, Mark Long pipe or equivalent brand}

Providing and fixing wash basin with pedestal of std. Height with single hole for pillar tap with C.I or

M.S brackets painted white including cutting cutting holes and making good the same including C.P.

63 brass waste and waste pipes and bottal trap (A) Vitreous China: (ii) Flat Back washbasin 550 mm x 3.00 Nos 1946.27

400mm size.In colour.

Pro. & Fix. wash down water closet (anglo indian W.C pan of Vitreous china Patern.) with integral"

p " or " s " trap and PVC flushing cistern with a pair of C.L.I. Or Mild steel Brackets, complete with

fittings such as lead value siphon, 15 mm. Nominal size brass ball valve with polythene float, C.P.

Brass handle unions and couplings for connections with inlet, outlet and over flow pipes, 40 mm. dia.

flush bend including cutting holes in walls and making good the same connecting the flush bend with

cistern and closet etc comp incl plastic sheet cover including jointing trap with pipe in cm 1:1 (a )

Vitreous china in white or color

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and fixing Special Needs Range CRUSE SET, EWC, 710 x 370 x 810 mm, New Cat No:

S1021113 S Trap, S1021114 P Trap, S1060106 Cistern, B1520118 Soft Close Seat Cover,

B1810112 Twin Flush Fittings, S2040101 Wash Basin 510 x 400 mm, F9030451 Spatula Lever

65 basin mixer, B2210106 Wall mounted Grab bar 600 mm long, B2210106 Wall mounted Grab bar 1.00 Nos 49661.70

600mm long, B2210108 Wall mounted Hinged rail 750 x 750 {Cera or equivalent} as

directed by Architect Office {SUGAMYA BHARAT Instruction}

Providing erecting and fixing double coated 4-layer tough virgin plast ISI water tank of required

66 capacity each with all necessary fittings and connection etc. complete on terrace. 3000.00 Litre 9.54

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick

67 A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. 3.00 No 859.41

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs

68 with C.P. brass scews.(B) 600mm x 20mm size. 5.00 No 616.42

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I.

69 cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 6.00 No 1246.92

150mm x 100mm size P of R type

Providing and fixing CP brass screw down stop cock of approved quality 15mm size with adjustable

70 wall flange..or as per instrction of engineer incharge. 10.00 No 205.83

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions, total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

71 sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 6.00 No 2932.93

with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

72 sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 6.00 No 3660.76

with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or

two inlets.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse

73 sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 5.00 No 7180.44

with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(iii) Inside dimensions 600mm x 850mm and 450mm deep for pipe lines with three

or more inlets

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

Constructing Sandwitch Platform of 16 to 18 mm thick Polished Black Granite at top and 25 mm

thick Kota stone slab using cement mortar 1:3 for sandwich and fitting at bottom & edges with

waterproof rigid adhesives including macking necessary grooves in walls with Vertical Kotastone

75 30 mm x 2 No sandwitch thick every 60 cm centre to cenre including all labour material of 12.40 Sqm 5925.67

approved quality incl. full moulded round front edge fixed in wall for partition and jointed with grey

cement slurry including rubbing and polishing etc. complete

Providing and fixing stainless steel kitchen sink glossy ASIS 304 grade and 1 mm thick with overall

size 510mm x 432mm x 330mm deep having bowl size 410mm x365mm x 165mm of Nirali or

equivalent brand with all fittings CI or MS brackets painted white or fixing on stone base including Nos

cutting holes and making good the same brass valve and fisher union fitting including all necessary

Providing thoruting or plaster drip and moulding to R.C.C. chhajja.

Providing 12mm wide groove throating / notch in plaster including finishing the same etc. complete

78 for all height. 351.00 Rmt 15.15

Providing and fixing in position 300mm high , 150mm wide englsih letter made from 1.0mm thick

79 stainless steel sheet as directed by enginer in charge with all necessary tolls & plants etc. complete. 40.00 No 707.00

Providing and fixing in position 150mm high , Englsih letter made from 1.0mm thick stainless steel

80 sheet as directed by enginer in charge with all necessary tolls & plants etc. complete. 100.00 No 404.00

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and fixing door Single shutter having factory fabricated std. Extruded aluminium colour

anodized hollow section {Section 63.50 x 38 mm x 2.50 mm thick } for door frame, hollow portion

of door frame shall be filled with wood to be insert for durable grip of door hinges, with factory

made 38 mm.thick flush door both side pre laminated with 6 Lever Mortice lock , SS Aldrop 30cm Sqm

long, SS Handle size 15 Cm Long, Tower Bolt size 20 cm etc. as per detail colour & pattern approved

by this office including necessary anodized alluminum fixtures and fastenings.

Providing and fixing Anodized Alluminum Section Jindal Deluxe Sliding Window System E (30mm)

series sction memebers Two track window section bottom track 20879, frame top & side

82 shutter frame top rail & Lock rail 21675 & bottom rail 20772, lock rail 20550 with 5mm thick 0.90 Sqm 3435.01

transparent plain float glass, with transparent silicon sealant with allu. anosized coated fittings and

fixture etc complete.

Providing and fixing M.S. box pipe 75mm x 50mm grill at 10cm interval vertical at required spacing

as per design including hold fasting with coach bolts including one coat of primer and two coats of

mattfinished oil painting etc complete.

Providing and fixing Safty grills of required pattern for windows 12 mm dia M.S. round bar at

required spacing as per design including fixing rat mesh and hold fasting with coach bolts including

84 one coat of primer and two coats of mattfinished oil painting etc complete. 300.00 Kgs 114.23

Providing and laying 18mm thick GVT slab ( Single Piece for riser 1250 x 150 and tread 1250 x

mm & 600 x 600 landing ) for stair steps and risers as per design including full moulded round front

steps & necessary groove on treads of steps laid on 20mm thick cement mortar 1:3 ( 1 cement :

coarse sand ) jointed with gray cement slurry including rubbing and polsihing etc. complete.

Providing and laying machine polished machine cut Kota stone slab ( 60 x 45cm Size) flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime

putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match

the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars

laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury

87 mixed with pigment to match the shade of slab including rubbing and polishing etc. complete 6.00 Sqm 1226.46

Providing and laying 60 x 60cm GVT Vitrified tiles 8 to 10 mm thick with pattern colour & Shade as

detailed approve by architect ( 10% Dark colour tiles Pattern ) in flooring treads of steps and landing

88 laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand) finishing with flush 65.00 Sqm 1120.36

pointing in white cement.

Providing and laying 60 x 60cm GTV Vitrified tiles 8 to 10 mm thick with pattern colour & Shade as

detailed approve by architect ( 10% Dark colour tiles Pattern ) in skrting risers of steps and dedo on

89 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 9.00 Sqm 1114.09

Providing and laying 30cm x 30cm in size Anti skid Ceramic tiles 6mm thick in flooring treads of

90 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) 6.00 Sqm 1017.30

finishing with flush pointing in white cement

Providing and laying 30 x 60 Cm size glazed tiles 6mm thick in skrting risers of steps and dedo on

91 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 27.00 Sqm 1074.00

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering

upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

92 including finishing with a flating coat of neat cement slurry etc. complete. for Ground Floor 111.00 Sqm 212.01

Wall painting with Applying two coats of putty & two coats of primer of approved brand (three

coats) plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give

93 an even shade including throughly brushing the surface free from mortar droppings and other foreign 285.00 Sqm 118.59

matter and sand papered smooth.

Wall painting with Applying two coats of putty & two coats of primer of approved brand & (three

coats) with plastic emulsion paint of approved brand and manufacture on undecorated ceiling surface

94 to give an even shade including throughly brushing the surface free from mortar droppings and other 90.00 Sqm 124.28

foreign matter and sand papered smooth.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

96 fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm. 19.00 Rmt 253.82

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

97 fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 40mm. 10.00 Rmt 447.72

Providing and fixing C.P. brass shower rose heavy duty with 15mm or 20mm inlet.(A) 200mm dia.

98 Each 1.00 Nos 282.16

Providing and fixing Toilet paper Roll holder with Flap of Jaguar or equivalent brand as directed by

99 Engineer in charge including fixing as and where directed etc. complete.(A) C.P. Brass 1.00 Nos 428.00

Provision and Fixing water closet Squatting orissa type W.C. pan size 580mm intefral footrest and

100 mm P or S trap and including 25 mm dia CP brass Flush valve and GI inlet connection etc. Comp Nos

(A) Vitreous china long pattern white Colour.

Providing and fixing 18MM TERMITE PROOF PLY (GREENPLY OR EQUIVALENT) WITH

BOTH SIDE LAMINATE & PVC BEADING ON PERIPHERY and Providing and Fixing Stainless

Steel (Grade -316) accessories, sheet cutlery basket (2 Nos), Thali Basket(2 Nos), Plain Basket(2

nos), Cup Saucer Basket (2 Nos) of size 520 x 485 x 100 mm fixing on telescopic channel (GODREJ

OR EQUIVALENT) having hardware like handles, dead lock, magnet etc with fixing all expose

surface are decoartive laminate sheet and other inner surfaces are 1.0 mm thick lamiate including all

necessary fixture and fastening ( Steel handle, hinges, stopper , chains and locking arrangement etc.

complete as directed by Engineer-in-charge.

Providing and Fixing 18 mm thick Plywood SLIDING SHUTTER for Cupboard or Below platform

shutter using 18mm thick TERMITE PROOF PLY (GREENPLY OR EQUIVALENT) WITH BOTH

SIDE LAMINATE & PVC BEADING ON PERIPHERY. Exposed face should be covered with

mm thick laminate of approved quality and pattern, colour, texture the rest of the inside surfaces,

shelves ete. shall be finished with 0.80 mm thick white laminates of approved make, wooden framing

102 shall be used including alround framing of 19 mm X 12 mm. teak wood member at all borders and in 11.00 Sqm 15437.85

the centre where ever, all the sides of the shutter should be covered with teakwood battens and

provided with necessary framing, best quality SS channels for sliding, SS finished hinges, hadles,

megnet, deadlock etc. as approved and directed by Engineer-In-Charge.

Providing and laying Granite Stone Slab 20 mm. thick in Cupboard Shelves resting on wall fix and

jointed with white cement slurry including rubbing, polishing labour charges finishing etc. complete

as directed.

Providing 20 mm thick Water proof cement plaster for sunk in single coat on bricks/ concrete wall

for interior plastering upto floor two level finished even and smooth (ii) Cement mortar 1:3 (1-

104 cement : 3-sand) and mixing waterproofing materials of approved brand and manufacture in cement 64.00 Sqm 241.79

mortar in proportion recommended by the manufacturer for All Floors.

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg.

Providing and laying cement concrete 1:4:8 (1cement : 4 coarse sand : 8 Machine Crushed stone

aggregates 40 mm. nominal size) and curing complete excluding cost of from work in :(a) Foundation

and plinth

Providing and laying controlled cement concrete M-200 and curing complete including the cost of

form work but excluding the cost of reinforcement for reinforced concrete work in Wall

caps/Copping Ground Floor

Providing and fixing mild steel door with 40 x 40 x 6 mm angle for frame and for shutter frame 30 x

30 x 3 angle. For windows frame of angle 35 x 35 x 5 & for shutter windows 25 x25 x 3 mm size

angle and 18 gauge sheet for panels & 10 mm dia bars at 10 cm c/c for grill and 40 x 6 mm flats on

edge of shutter, & 20 x 6 mm binding patti, including one coat of primer and two coats of oil painting

etc. comp. as per detail / as directed by Engineer in charge.

Providing 15mm thick cement plaster ( Mala Trowel finish) in single coat on brick/concrete walls for

109 interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:4 (1- 89.00 Sqm 211.82

cement:4-sand) for Ground Floor

Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed

of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white

Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry Sqm

Providing and laying hand dressed polished blue Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid over and jointed with grey

112 cement slurry including rubbing and semi miror polishing with emery No. 600 etc. complete. (A) 14.00 Sqm 1013.57

25mm thick

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat

114 cement finishing, watering etc. complete. 16.00 Rmt 24.28

Providing and fixing S.S Butterfly valve of IS aprroved brand (C) 50mm dia., No.

Supplying & installing of Dry Chemical Powder type 6 Kg. Capacity fire extinguisher as per I.S.

116 ISI. Mark with necessary fittings etc. complete. 8.00 No. 2222.00

Providing Carben doxide type fire extinguisher 4.5Kg. Capacity with I.S.I. Mark and test certificate

117 of explosive deprtment of Nagpur 8.00 No. 5706.50

Providing and laying ordinary cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone

118 aggregate 20mm nominal size) and curing etc. complete including the cost of form work but 3.00 Cu.m 3740.22

excluding the cost of reinforcement.(a) Footing.

Providing and laying controlled cement concrete M-200 and curing etc complete including the cost of

119 form work but excluding the cost of reinforcement for reinforced concrete work in SLABS 12 cm 3.00 Cu.m 6468.21

Thickness for Ground Level.

Providing T.M.T. bar ( Thermo Mechanically treated Bars) reinforcement confirmed to IS-1786 for

R.C.C. work including bending, binding, and placing. In position comp. Up to floor two level. For Kg

Ground Floor

Clearing and grubbing road land including uprooting rank vegetation grass bushes, shrubs, sapling

and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable

materials(D) By mechanical means in area of thorny jungle

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats

architraves, holdfasts and other attachment etc, complete and stacking them within all lead and lifti) No

Not exceeding 3 Sq.M. in area.

Demolition including stacking of serviceable materials and disposal of unserviceable material with all

123 lead and lift. (1) R.C.C Work 24.00 Cum 1082.35

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and

124 disposal of unserviceable materials with all lead and lift. 81.00 Sqm 49.12

Demolition of brick work and stone masonory including stacking of serviceable materilas and

125 disposal of unserviceable materials with all lead and liift (2) In cement Mortar 41.00 Cum 562.89

Dismentling steel work including distemering and stacking the materials with all lead and lift.

Disposing of Dismentalled and demolished unsufull materials including loading , carting and

127 disposing to 5.0km from the site and clearing and leveling the ground 174.00 Cum 82.62

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 kV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 kV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate

130 modules erected on / in wall / ceiling with following type accessories cat lll 30.00 Pts. 309.06

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box,

single mounting base frame covered with textured / metallic/white front plate , modules erected with

131 necessary connections as per site situation directed by Engineer In charge.

(10) 6/16Amp. Universal socket Cat.III

(9) 16 Amp. SP one way switch Cat.III

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of

132 following size Cat.III 588.00 Mtr. 104.03

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

133 adhesive solution & Clamps with following dia of pipes, in approved manner as directed

(a) 20 mm Mtr.

providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

134 conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm Mtr.

(i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm ) 40.00 Mtr. 532.27

Decorative call bell Ting-tong box type 250 volts complete erected

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K

to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 %

136 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of 25.00 Ea 535.30

ranges shown.)(A) Tube Light with integral driver (v) 36-40 Watts, Surge-2 kV, IP-20, conventional

feet CAT lll

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable

137 for E14 / E27 / B22 lamp holders, pf >= 0.5 10.00 Ea 112.11

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder (ii) 5 to 8 watts cat lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED

driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

wattage capacity between the ranges shown.) (A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips complete.IP20 (iv) 22-24 watts, Surge-2

KV cat lll

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark cat lll

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having

140 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (B) 40 6.00 Ea 362.59

Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing box having following capacity (c)63 Amp.

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

142 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(b) sheet steel double door (iii)8 way 1.00 Ea 3412.79

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as directed (ii) 40Amps. DP

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and erecting HOT deep Galvanised iron strip/wire 4.064mm to 1.626mm.

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of

mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

145 testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- 2.00 Ea 5842.85

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency.

Length of Pipe - 1 MtrBack filling compound - 1 Nos. of Bag of 15 Kgs.[A] For electrical installation

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

Providing & erecting Approved make Power Saving 45 - 50 Watt Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades

146 with aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make shall be 22.00 Ea 1948.29

approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly

147 painted for fan complete with proper insulation without leakage and earthing. 22.00 Mtr. 108.07

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected

148 concealed in Ceiling with necessary finishing. 22.00 Ea 108.07

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS

150 body with inbuilt lowers & square frame. 200mm with 1350RPM Cat.II 5.00 Ea 1366.53

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for

three phase submersible motor having[B] For 2 HP 3 phase open well horizontal mono block pump

151 set suitable for 200 LPM @ 25 mtr head suitable for 50 mm dia delivery pipe cat ll 1.00 Ea 11807.91

Supplying & erecting approved make motor control cubical panel (Direct - on - line) made from

G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC - 3/23duty) main fuses, single

phasing preventer, indicating lamps for R- Y - B phases, overload relay, Automatic water level

crimped, main contactor & overload relay, start - stop push buttons, to be erected on angle iron

frame grouted on wall as directed. The isolator, overload relay & contactors will be of L & T,

Siemens or BCH make only. (A) DOL up to 5.0 H.P.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper

153 cable approved make of following Size. (C) 3 Core x 4 Sq. mm 20.00 Mtr 146.45

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 kV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden

154 box, single mounting base frame covered with textured/metallic/white front plate modules erected on 17.00 Pts. 809.01

/ in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat lll

Providing & erecting Switch board for Computer or electric apparatus consisting of following

modular type accessories mounted with PVC / Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white front plate,modules erected with necessary

connections as directed

155 1 no. 6A/16A universal plug-switch combined. 9.00 Ea 1133.22

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories cat lll

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

156 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(a) single door (iii)8 way Ea

Total Tender amount

Rupees One Crore Twenty Nine Lakh Five Hundred Sixty One And Paise Seventy Seven Only

I/am we/are willing to carry out the work at _____% above /below _____________ percent (should be written in figures and words) of the estimated rates mentioned above. Amount of

my/our tender works out as under.

* Estimated amount put to tender

Deduct :_____ % Below Rs.________________ Add :_____ % Above Rs.________________

Net Rs. ______________________ Total Rs. ______________________

In words ___________________________ In words __________________________

1. The Contractor Shall Exhibit a board with deatiled specification and details of work as directed by the Engineer-In-Charge for which no Extra Payment shall be made.

2. The labour crss will be deducted as per prevaling Rules i.e 1% of the work done.

3. GST and Income tax TDS will be deducted at a Source while making Payments of bills.

4. In all RCC items in Rate Analysis Standard cement Consuption has been taken as per Govt.G.R: PRC -10/2017 cement consumption/16/c, Date: 11/05/2017 as stated i. S.O.R

therefore in RCC Items where there is a changed as per actual mix design the cost of diffrence of cement consumption have been deduvted from the rate of orignal item at the rate of

input rate mentioned in all the tender.

5. Credit Amount Rs 47456.00 for Credit for Dismantled materials will be deducted from First Running account bill.

Above all items of " Schedule-B" with iem Description,Unit,Rate & Amount Have verified by me and found Order.

Deputy Executive Engineer Executive Engineer

R & B (Pan) Sub Division R & B (Pan) Division

Bhachau Bhuj Kachchh