Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹12.6 LAWARDED | AWARDED |
Tender Value
₹12.6 L
EMD Value
₹32,000
Closing Date
9 Jan 2026, 9:30 pmClosed
Karnataka Neeravari Nigam Limited
Repairs to the office Building of AEE, MRBCC Sub Division No.13, Belagavi for the year 2025-26
KNNL/2025-26/BD/WORK_INDENT3720
KNNL/2025-26/BD/WORK_INDENT3720
Open
Buildings
Electronic Documents, First(One Cover)
KNNL Division Kalasa Project Div Khanapur
₹500
₹32,000
31 Dec 2025
31 Dec 2025
5 Jan 2026
Repairs to the office Building of AEE, MRBCC Sub Division No.13, Belagavi for the year 2025-26
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Coursed rubble masonry (first sort) with hard stone in foundation
and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Additionalities for Formwork, Centering & Scaffolding.
For foundation (3%)
Additionalities for Formwork, Centering & Scaffolding.
RCC Beams, Lintels & Troughs of Aqueducts (60%)
Additionalities for Formwork, Centering & Scaffolding.
Earth retaining structures (10%)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Additionalities for Formwork, Centering & Scaffolding. Chejjas, Canopy & Other Architectural projections of minor sections (45%)
Additionalities for Formwork, Centering & Scaffolding.
RCC Roof Slabs (50%)
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized ...
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two coat applied @ 1.67 l/ 10 m²) on existing cement paint surface including preparing the surface after thoroughly cl...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cist...
Providing and fixing Towel rail 600mm length with hooks made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...
Providing new Orient electric Electric Pedestal Type Fan and Regulator 400 Adjustable height, Min.900mm Max. 1050mm (for 400mm size Fan)
Providing new Personal Computer (hp Intel Core i7-14700 Win 11 H 16 5121)
Providing new Laptop-Note book NVMe-SSD 1024 GB storage, DDR4 32 GB RAM, Windows 11 Home OS, intel core i7-1355U processor, 14" LED Display, Webcam HD-720p
Providing new RICOH A4, A3 and Legal Size Monochrome (Black) Laser Multifunction Machine (M2810N, Network, WiFi, ARDF, 512 M B RAM)
Providing new High-back Revolving Chair of adjustable height with wheels
Providing new Executive table with pedestal unit
Providing new Modular Table with Particle Board Table Top and Metal understructure
Providing new Low-back Chair with fixed armrest with padding
Providing new Revolving Chair of Adjustable height with Wheels
Providing new Brother A4 and Legal Monochrome (Black) Laser Computer Printer (HL-L2400D)
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .