Comprehensive ARM and Operation of Civil, E and M Services (Internal and External) Etc at East Kidwai Nagar, New Delhi110023

ABSTRACT OF COST

DSR Amount including

Sr. No. Description Non-Schedule Amount (In Rs.)

Cost Index (In Rs.)

A INTERNAL WORKS

1.0 ARM of Internal Civil Works including Housekeeping etc. - 16,54,56,661.20

2.0 ARM of Electrical Installations - 3,31,16,351.33

ARM of Wet riser & Sprinkler system, drinking water & sump pump system, Fire Alarm, Detection -

B EXTERNAL Works

5.0 ARM of External Civil Works - Road, Sewer, water supply, boundary wall, Basement areas etc. - 5,78,29,015.77

6.0 Horticulture works 2,92,75,659.73

7.0 Cleaning of Sewer line 71,475.00

8.0 Disposal of Excess garbage 22,62,150.00

9.0 ARM of Electrical Installations - 2,52,68,411.36

C Gateman cum Guard and Lift Operator cum Guard

10.0 Gateman cum Guard 0.00 10,33,17,200.23

11.0 LIFTS OPERATOR CUM GUARD 0.00 30,80,75,770.05

D Day to-day Civil works

12.0 Cleaning of UG tank 34,60,815.30 -

13.0 INTERNAL & EXTERNAL FINISHING 19,77,603.76 9,44,91,645.95

14.0 Civil works for Maintenance 94,13,171.90 85,35,396.33

E Day to-day Electrical works

F Special Repair Works

16.0 Special Repair Works Civil works 2,79,283.65 11,95,930.10

17.0 Special Repair Works Electrical works 0.00 21,05,953.20

TOTAL AMOUNT 92,37,90,096.00

TOTAL AMOUNT 92,37,90,096.00

Digitally signed by ANUJ

BILL OF QUANTITIES

DSR CIVIL-2023 RATE IN RS. AMOUNT IN RS

S.No. Description of item of work Unit QTY

DSR ELECT.-2022 DSR NS DSR NS

Maintenance of Residential Building

1.00 SH - I: CIVIL WORKS i/c SANITARY, WATER SUPPLY & SEWERAGE SYSTEM

Maintenance and upkeep of all internal civil assets i/c safety, security of all services at GPRA campus,complete with all materials labour, T&P ,

machines , trucks etc. as required on all days including Sunday and holidays comprising following operation as per the details of quarters,

Buildings, as per direction of the engineer in charge and as per enclosed GCC, Special & other conditions, specifications etc.

Cleaning & repairing of lift lobby, staircases, etc, daily sweeping by machine and / or manually and picking up of papers, dry leaves & garbage etc.

wet mopping of floors twice in a week and mechanised wet mopping periodically in every 6 months, Lift lobby, staircase at least once in every week

with R-2 Chemical and terrace cleaning once in a month complete to the entire satisfaction and as per directions of Engineer-in-charge.

Antitermite treatment, rodant, cockroach & insect treatments etc. complete to the entire satisfaction and as per directions of Engineer-in-charge.

Maintenance, repairing and cleaning of chajjas, roofs, expansion joints etc. and removing of cobwebs, beehives, vegetation including disposal of silt,

vegetation, malba, waste garbage etc. to the authorized dumping ground outside the campus at the location approved by MCD/NDMC complete to the

1.1 NS entire satisfaction and as per the direction of Engineer-in-Charge.

Maintenance, repairing and fixing of damaged doors, windows, ventilators of steel, aluminium, wood, PVC including replacement of glass panes etc. at

all floors & heights and replacement of necessary fittings & fixtures of approved make and quality, wherever required to keep them in proper functional

conditions to the entire satisfaction and as per direction of Engineer-in-charge.

Maintenance and repair of plumbing system for the entire campus including stopping leakages or over flow of water from PVC/RCC over head tanks,

cisterns and replacement of damaged fittings i/c CP Brass fitting, ball cocks and G.I. fittings etc. to keep the entire water supply system efficient and

functional to the entire satisfaction and as per direction of Engineer-in-charge.

Maintenance and repair of internal & external plaster, flooring, masonry & RCC works, pointing on roof tiles, patch plaster on area upto 2.5 sqm, CC

gola i/c fixing of W.C. seat, gully trap, W.C trap, floor traps and sealing of leakages from gully trap, W.C trap, floor trap, drainage and vertical stacks

etc. and restoration of existing finishing in the affected areas to the entire satisfaction and as per direction of Engineer-in-charge.

Welding by single/3 phase electric welding machine including transportation of electric welding machine at site to weld broken grills, hinges, doors,

windows, gates, railings and any other steel work of dwelling units, offices, etc.complete as per direction of Engineer-in-charge.

Investigating causes of seepage/dampness/leakage from roof, wall, floors, pipes of all kinds etc. Dismantling existing affected portion, arranging

required materials, labours, T&P including taking all necessary measures, rectification complete in all respect in time bound manner as per

saReplacement of broken, damaged, edge depressed & reverse flow floor tiles including base mortar/ adhesive to match with surrounding colour

tiles & colours shades as per specification & complete satisfaction to the Engineer-In-Charge.tisfaction of Engineer-in-charge i/c making arrangement

of lift/ladder or jhulla as per required heights.

Fabrication works in Main Gates, Stair cases, i.e realignments, additional tower bolts, sliding bolt including making holes & welding wherever

Cutting RCC & providing hooks for additional ceiling fans including making repairs to original condition.

Closing holes in walls, ceilings, floors etc including repairing with cement mortar or some other suitabe materials to prevent entry of Rats & others

Any other miscellaneous works connection with above as per direction of Engineer-in-charge.

Assigning all the complaints received from any source to the worker of respective trade and get back confirmation from the allotee w.r.t. disposal of

complaint on daily basis.

All civil works, housekeeping etc as mentioned above or elsewhere in tender are to be carried out in all towers and basements.

Cleaning & repairing of basement parking spaces, etc, daily sweeping by machine and/or manually and picking up of papers, dry leaves, grass,

earth, brick bats, stone pieces, etc. disposing of resulting rubbish/ garbage etc, including removing of garbage from garbage bins to the soild waste

management in the campus complete to keep the entire basement neat and clean including manually wet mopping of floors and mechanised wet

mopping periodically cleaning once in every third day complete to the entire satisfaction and as per directions of Engineer- in - charge.

Running and Maintenance of NBCC service centre (Main control command center) at Type IV basement East Kidwai Nagar Complex by providing &

operating 24x7 intigrated facility management centre (help desk) with all necessary manpowers, hardware and software for lodging day to day

complaints and duly intigrated with NBCC Sewa kendra wherever required wherein broadly the following jobs are required to be performed (Campus

and peripherial including operating staff necessary consumables, computer, software, internet/broadband connection shall be arranged by the

contractor at his cost.)

Downloading the complaints received on complaint app/IVRS/Emails on daily basis.

Recording the complaints in register received at service centres in person or through telephone and issuing acknowledgement with complaint no. i/c

assigning the complaint to the workers of respective trade.

1.3 Uploading all the complaints received at the service centre in the IVRS/Emails/E- sewa system/complaint app on daily basis.

Uploading the status of attending of the complaints on daily basis on IVRS/Email/E-sewa system/complaint app so that the backlog is not more

Provide automated status/completion of complaints to allottes, Provide system to allow feedback by allottes regarding complaints Generate online

reports for monitoring by Engineer-in-Charge.

Preparing the abstract of attended / unattended complaints on daily, weekly and monthly basis and submitting the same with reasons of unattended

complaints, action plan of completion to the Engineer-in-charge of the service centre or his authorized representative.

Generation of vacation/ occupation/inventory reports from IVRS/ Emails/E-sewa.

Any other miscellaneous works connection with above as per direction of Engineer-in-charge.

Super Structure - Towers

a Type II (60 flats in each tower, Total 7 towers) Per Month Per Tower 252.00 55,866.71 1,40,78,410.89

b Type II (90 flats in each tower, Total 4 towers) Per Month Per Tower 144.00 83,800.06 1,20,67,209.34

c Type III (G+14, Total 12 towers) Per Month Per Tower 432.00 63,646.14 2,74,95,132.80

d Type IV G+14, Total 17 towers) Per Month Per Tower 612.00 69,266.62 4,23,91,169.73

e Type V (G+6 towers, Total 13 towers) Per Month Per Tower 468.00 40,421.76 1,89,17,384.57

f Type V (G+14 towers, Total 6 towers) Per Month Per Tower 216.00 86,618.06 1,87,09,501.22

g Type VI (G+6, Total 10 towers) Per Month Per Tower 360.00 44,090.14 1,58,72,450.71

h Type VII (G+6, Total 9 towers) Per Month Per Tower 324.00 49,152.48 1,59,25,401.94

SUB TOTAL OF INTERNAL CIVIL WORK INCLUDING HOUSEKEEPING - 16,54,56,661.20

2 SH-II :: INTERNAL ELECTRICAL INSTALLATIONS

All inclusive AR & maintenance, upkeep of all electrical internal installations, Lights, Fans, Geysers etc. as per details below at residential units east

2.1 NS kidwai nagar, New Delhi in 24x7 for all days in a month i/c sundays and holidays complete with materials, and as per direction of Engineer -in-

• Light points/Fan pts/ Ex-fan pts/ Call bell pts.

• 5 amp plug points

• 15 amp power plug points

• 25/32 amp AC plug points

• Telephone outlet, TV Outlet

Digitally signed by ANUJ

• Telephone wire, TV Wire

• control/communication cables/wires, connectors

• OFC, ONT (Optical Network Terminal) device & Box, jack panel

• Splitter boxes, Switches, racks

• LED light fittings

• All type of light fittings

• Ceiling fans 1200 mm/900mm

• Ex-fans 250/300/450mm

• Water Heater Geyser 25 ltrs. and 3 Ltrs (Instant)

• SPN & TPN MCB DB’s with MCB’s, DP, TPN, RCCB

• Rising mains, Bus Bars, Bus duct and Tap off box of different ratings

• LT,HT Cables & Cables trays of different size

• Solar Street Lights, compound lights with LED, all decorative light fittings, control gears, Solar panels, Batteries etc.

• All type of feeder pillars with switch gears etc.

• All HT, LT, UG & OFC cables.

• All LT/HT panels i/c RMU ,UPS Panels, Main LT panels , lighting panel, Lift panels, Blocks panels, Common service panel etc.

• Domestic and fire pump houses.

• DG set with cooling towers and electric sub-stations.

• Lightning Arrestor System

• Earthing system

• Telephone exchange, Intercom, Public address system, Fire alarm system, CC TV Surveillances system, Water Control & monitoring system.

• Boom barriers & all Security posts with security equipment’s.

Any other works in connection with the smooth operation & maintenance work not mentioned above, but required to be carried out with in the cost

and/ or also as per direction of the Engineer -in - charge.

pump house, UG Tank

Any other pumpset/ other installation

any other work in connection with the smooth operation & maintenance work not mentioned above, but required to be carried out within the cost

and/ or also as per direction of engineer-in charge.

a Type II (60 flats in each tower, Total 7 towers) Per Month Per Tower 252.00 12,633.92 31,83,748.91

b Type II (90 flats in each tower, Total 4 towers) Per Month Per Tower 144.00 18,950.89 27,28,927.63

c. Type III (G+14, Total 12 towers) Per Month Per Tower 432.00 13,686.75 59,12,676.54

d Type IV G+14, Total 17 towers) Per Month Per Tower 612.00 10,859.36 66,45,928.07

e. Type V (G+6 towers, Total 13 towers) Per Month Per Tower 468.00 6,399.00 29,94,732.27

f Type V (G+14 towers, Total 6 towers) Per Month Per Tower 216.00 13,712.14 29,61,823.13

g Type VI (G+6, Total 10 towers) Per Month Per Tower 360.00 12,067.38 43,44,257.39

h Type VII (G+6, Total 9 towers) Per Month Per Tower 324.00 13,408.20 43,44,257.39

SUB TOTAL OF INTERNAL ELECTRICAL WORK - 3,31,16,351.33

3 SH III:- ARM OF WET RISER & SPRINKLER SYSTEM, DRINKING WATER & SUMP PUMP SYSTEM, FIRE ALARM, DETECTION SYSTEM, Intercom ETC.

All inclusive AR & maintenance of fire-fighting system i.e. including providing services for operation of manual fire alarm ,detection system, down

3.1 comer system, Pumps intercom & Lift intercom, 24x7 on all days of the year including Holidays as per terms and conditions attached i/c periodical

fire testing, mock drill & obtaining fire clearance certificate as & when becomes due.

3.2 All water lines, motor, pumps, electrical wiring, intake, any other Pump/machinery installed etc.

NS Any other works in connection with the smooth operation & maintenance work not mentioned above, but required to be carried out with in the cost

and/ or also as per direction of the Engineer-in-charge.

a Type II & III Per Month Per Tower 828.00 4,326.28 35,82,163.80

b TypeIV Per Month Per Tower 612.00 5,257.07 32,17,326.45

c Type V Per Month Per Tower 684.00 4,703.69 32,17,326.45

d Type VI & VII Per Month Per Tower 684.00 4,703.69 32,17,326.45

SUB TOTAL OF ARM OF WET RISER & SPRINKLER SYSTEM, DRINKING WATER & SUMP PUMP SYSTEM, FIRE ALARM, DETECTION

4 SH-IV: EXTERNAL CIVIL WORK

Maintenance and upkeep of all external assets and services i/c safety of all services in common areas, service centre, under ground & over head

tanks at GPRA campus,complete with all materials labour, T&P , machines , trucks etc. as required on all days including Sunday and holidays

comprising following operation as per the details of quarters, Buildings,external services, as per direction of the engineer in charge and as per

enclosed GCC, Special & other conditions, specifications etc.

Cleaning & Maintenance of garbage bins i/c cleaning garbage chamber twice/thrice in a day or as required by removing collected garbage from

garbage bins, disposing the garbage at soild waste management garbage yard by using the covered mechanical vehicle, complete to the entire

satisfaction of Engineer - in - charge

Maintenance and operation of water supply grid and valves including unfiltered water supply line in the entire campus to keep the water supply

system efficient and operational at all times complete to the entire satisfaction and as per direction of the Engineer - in - Charge.

Sweeping and wet mopping of Electrical Sub-Stations, pump house, sewege treatment plant, adjoining open area, public toilet, pavements, basement

parking etc. daily including washing basment parking once in a week complete to the entire satisfaction and as per direction of Engineer -in- charge.

Maintenance, repair of boundary wall i/c M.S grill, all items installed in Central park like sitting benchs, children play equipments etc. as an when

Fogging & Anti larva spray in whole campus including towers, basements, green areas, pathways, roads, driveways etc. as & when required and as per

the direction of Engineer-in-charge.

Welding by single/3 phase electric welding machine including transportation of electric welding machine at site to weld broken grills, hinges, doors,

windows, gates, railings and any other steel work of offices, shops, parks, boundary walls etc.complete as per direction of Engineer-in-charge.

Cleaning & repairing of Central Road/Roads/Gurudwara Road, cycle track, pavements, footpaths, walking tracks in lawns/park , open areas, storm

water drains, floors of common areas , spaces, etc,of full campus daily sweeping by machine and / or manually and picking up of papers, dry

leaves, grass, earth, brick bats, stone pieces, etc. and cutting grass from the edges of Footpaths, surrounding of building, open areas, etc,

inside the campus and disposing of resulting rubbish/ garbage etc, including removing of garbage from garbage bins to the solid waste management

in campus complete to keep the entire campus neat and clean including wet mopping of floors and mechanised wet mopping periodically cleaning

once in a month complete to the entire satisfaction and as per directions of Engineer- in - charge.

Periodical cleaning & Maintenance of sewerage & drainage network by using Pressure jetting machines twice in a year or more, if required i/c

desiliting of gully traps, manholes, gratings, chocked sewer line,rain water harvesting pits of whole campus, including all the sewer pipes lines,SW

piped/coverd drains and rain water pipe of all size twice in a year to the entire satisfaction of Engineer - in - Charge.

Digitally signed by ANUJ

Running and Maintenance of NBCC service centre (Main control command center) at Type IV basement East Kidwai Nagar Complex by providing &

operating 24x7 intigrated facility management centre(help desk) with all necessary manpowers,hardware and software for lodging day to day

complaints and duly intigrated with NBCC Sewa wherever required wherein broadly the following jobs are required to be performed (Campus and

peripherial including operating staff necessary consumables, computer,software, internet/broadband connection shall be arranged by the contractor at

Recording the complaints in register received at service centres in person or through telephone and issuing acknowledgement with complaint no. i/c

assigning the complaint to the workers of respective trade.

Any other miscellaneous works connection with above as per direction of Engineer-in-charge.

Cleaning rubbing scrubbing with the help of scrubbing machine having nylon brushes with the help of detergent to remove the stains of dust,

furniture mopping etc. on mosaic, tile, cement concrete flooring all complete as per direction of Engineer-in-charge.

Investigating causes of seepage / dampness/ leakage from , valve, pipes of all kinds etc. Dismantling existing affected portion, arranging required

materials, labours, T&P including taking all necessary measures, rectification complete in all respect in time bound manner as per satisfaction of

Engineer - in - charge i/c making of all arrangement of T & P required all complete.

Replacement of broken, damaged, edge depressed & reverse flow floor tiles including base mortar/ adhesive to match with surrounding colour tiles

& colours shades as per specification & complete satisfaction to the Engineer - In- Charge.

Fabrication works in Main Gates, i.e realignments, additional tower bolts, sliding bolt including making holes & welding wherever required.

Closing holes in walls, ceilings, floors etc including repairing with cement mortar or some other suitabe materials to prevent entry of Rats & others

All civil works, water supply system works, housekeeping etc. as mentioned above or elsewhere in tender are to be carried out in all basements.

Any other miscellaneous works connection with above as per direction of Engineer-in-charge.

All roads, Sewerline, water supply line, boundary wall, RWH system etc. (Total area is taken as 47300 sqm (Max.)

5 NS Subject: Comprehensive Operation and maintenance of 2 nos. sewage treatment plant (1x1500KLD + 1x650KLD) based on SBR technology at GPRA Complex, Kidwai Nagar (East), New Delhi-110023.

comprehensive operation and maintenance of the 2 no. STP plant (1x1500KLD + 1x650KLD) 24*7hours

Maintenace,Repairing including major & minor all type of maintenance and all instrument installed should be kept in operation and in good health at

the satisfaction of Engineer Incharge

Supply of various chemical, consumables etc. for plant operation for 2 nos. sewage treatment plant (1x1500KLD + 1x650KLD) based on

SBR technology at GPRA Complex, Kidwai Nagar (East), New Delhi-110023. are followings.

iii Jaggery Kgs. 360 83.00 29,880.00

iv Bio Culture Ltr 108 587.00 63,396.00

v Sodium Hypo Chloride Ltr. 64800 27.00 17,49,600.00

vi Salt for Softener KG 28800 11.00 3,16,800.00

viii Multi grade filter (Media), once in 2 years Kgs. 39000 10.00 3,90,000.00

ix Pebble & Gravel for Activated carbon filter, once in 2 years Kgs. 12000 10.00 1,20,000.00

x Activated carbon for activated carbon filter, once in 2 years Kgs. 6000 90.00 5,40,000.00

xi Softener Resin, once in 2 years Kgs. 12000 182.00 21,84,000.00

Lab Chemicals & consumables.

Daily Lab testing of Inlet and Outlet water at Sewage Treatment Plant (BOD, COD, TSS, ph, Hardness, TDS, Total Coliform, Oil & Grease,

1. Test will be done on daily basis of inlet/outlet/treated water/soft water.

2. Frequency of testing of treated water on half yearly basis from NABL approved laboratory is also included in this price.

3. Cost of all chemicals to be used in testing and cost of calibration including maintenance & replacement of damage part of lab equipment shall be

included with in the quoted rates.

4. Test record will be maintained on daily basis.

5. Testing of Domestic water from NDMC on half yearly basis in contractors scope within the quoted rates.

NOTE: The contractor will maintain a regular IMIR (Inward Material Inspection register) for the cosumables.

Following items will be replaced in case these are damaged and non repairable as per direction of Engineer in Chage complete in all

xiii Electrical -spare parts

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the

existing MCB DB complete with connections, testing and commissioning etc. as required.

2.10.1 Single pole NOS. 10 256.00 -

2.10.3 Double pole NOS. 10 656.00 -

2.10.4 Triple pole NOS. 10 1,007.00 -

2.10.5 Triple pole and neutral NOS. 10 1,228.00 -

NS Over Load Relay 5 amp - 8 amp Nos. 5.00 2028 10140

NS Over Load Relay 10 amp - 16 amp Nos. 5.00 2535 12675

NS Over Load Relay 12.5 amp - 20 amp Nos. 5.00 1859 9295

NS Over Load Relay 6.3 amp - 10 amp Nos. 5.00 1690 8450

NS Over Load Relay 1 amp - 1.6 amp Nos. 5.00 1690 8450

NS Over Load Relay 20 amp - 32 amp Nos. 5.00 4648 23238

NS Over Load Relay 0.8 amp - 1.25 amp Nos. 5.00 2113 10563

NS Over Load Relay 0.9 amp - 1.5 amp Nos. 5.00 1944 9718

NS Contactor, 12 amp Nos. 5.00 1690 8450

NS Contactor, 09 amp Nos. 5.00 1352 6760

NS Contactor, 16 amp Nos. 5.00 1859 9295

NS Contactor, 32 amp Nos. 5.00 5577 27885

NS Star Delta Timmer Nos. 5.00 1944 9718

NS PLC with programing Nos. 2.00 152100 304200

NS HMI with programing NOS. 2 50,000.00 1,00,000.00

NS Indicating lights, 220 Watt Nos. 20.00 338 6760

NS Selector Switches Nos. 25.00 423 10563

NS Mechanical parts & Spares Blower parts & Spares

NS Bearing , for 335 m3 blower Nos. 3.00 6760 20280

Digitally signed by ANUJ

NS Bearing , for 480 m3 blower Nos. 3.00 25350 76050

NS Bearing , for 770 m3 blower Nos. 3.00 28730 86190

NS Bearing , for 1200 m3 blower Nos. 3.00 29474 88421

NS Gear set , for 335 m3 blower Nos. 3.00 30420 91260

NS Gear set , for 480 m3 blower Nos. 3.00 40560 121680

NS Gear set , for 770 m3 blower Nos. 3.00 50700 152100

NS Gear set , for 1200 m3 blower Nos. 3.00 54080 162240

NS Rotor for , 335 m3 blower Nos. 3.00 33800 101400

NS Rotor for , 480 m3 blower Nos. 3.00 47320 141960

NS Rotor for , 770 m3 blower Nos. 3.00 57460 172380

NS Rotor for , 1200 m3 blower Nos. 3.00 64220 192660

NS Packing for 350 m3 blower Nos. 12.00 1622 19469

NS Packing for 480 m3 blower Nos. 12.00 1622 19469

NS Packing for 770 m3 blower Nos. 12.00 1622 19469

NS Packing for 1200 m3 blower Nos. 12.00 1622 19469

NS Belt ( flat belt ) for 335 m3 blower Nos. 24.00 845 20280

NS Belt ( flat belt ) for 480 m3 blower Nos. 24.00 1183 28392

NS Belt ( flat belt ) for 770 m3 blower Nos. 24.00 1268 30420

NS Belt ( flat belt ) for 1200 m3 blower Nos. 24.00 1352 32448

NS Oil seal for 335 m3 blower Nos. 12.00 3972 47658

NS Oil seal for 480 m3 blower Nos. 12.00 3972 47658

NS Oil seal for 770 m3 blower Nos. 12.00 4563 54756

NS Oil seal for 1200 m3 blower Nos. 12.00 4563 54756

NS Safety valve for 335 m3 blower Nos. 3.00 6760 20280

NS Safety valve for 480 m3 blower Nos. 3.00 6760 20280

NS Safety valve for 770 m3 blower Nos. 3.00 6760 20280

NS Safety valve for 1200 m3 blower Nos. 3.00 6760 20280

NS NRV for 335 m3 blower Nos. 3.00 5070 15210

NS NRV for 480 m3 blower Nos. 3.00 5915 17745

NS NRV for 770 m3 blower Nos. 3.00 6760 20280

NS NRV for 1200 m3 blower Nos. 3.00 8450 25350

NS Re-Winding of the Motors Capacity in Horse Power 0

NS Bush for Motors Capacity in Horse Power 0 0

NS Shaft for Motors Capacity in Horse Power

NS Impeller for Pumps Capacity in Horse Power

NS Fan ( Backward curve blade ) Capacity in Horse Power 0 0

NS Fan Cover Capacity in Horse Power

NS Connection Plate Capacity in Horse Power

Digitally signed by ANUJ

NS Connection Box Capacity in Horse Power

NS Glade Plate Capacity in Horse Power

NS Coupling Set ( Tyre Coupling )

NS Capacity in Horse Power

NS Coupling Set ( Star Coupling ) Capacity in Horse Power 0 0

NS Silicon Seal Capacity in Horse Power 0 0

NS OZONATOR: QUARTZ TUBE NOS. 24 7,047.00 1,69,128.00

NS OZONATOR: HT Transformer NOS. 16 16,655.00 2,66,480.00

NS OZONATOR: ozone card NOS. 16 15,374.00 2,45,984.00

NS OZONATOR: seeds kg 150 4,100.00 6,15,000.00

NS OZONATOR: ozone cell complete set 2 23,061.00 46,122.00

Supply, installation, testing and commissioning of Variable Frequency Drive (VFD) for Decanter operation of STP Plant.

Rating: 0.75 KW/1 HP

CHASSIS/IP20, IE2 2.4% Temp. 40 degree C

Sub-Total Of STP Works - 3,19,80,240.23

6 ANNUAL RUNNING & OPERATION OF EXTERNAL ELECTRIFICATION, ELECTRIC SUB-STATION EQUIPMENTS,DG SET ON GRID SYSTEM ETC.

All inclusive AR & maintenance, upkeep of all electrical external installations, Solar light,street light & other fancy (Decorative) external light etc. in

the residential campus east kidwai nagar, New Delhi in 24x7 for all days in a month i/c sundays and holidays complete with materials (excluding

replacement of damaged battery), and as per direction of Engineer -in-Charge. Any other works in connection with the smooth operation &

maintenance work not mentioned above, but required to be carried out with in the cost and/ or also as per direction of the Engineer -in - charge.

All inclusive AR & maintenance i/c providing services for operation of electric sub- station equipments and DGset,including cooling towers on all days

of the year including Sunday & Holidays as per terms and conditions

Running, Operation & AR & maintenance of - 1500 KVA DG sets, stand by DG sets on all the days including Sundays & Holidays complete with all

materials i/c Diesel oil etc as per terms and conditions attached.1500 KVA DG set,1010 KVA DG Sets, 750 KVA DG Sets HT Panel

Dry Type Transformer (2000KVA/1600KVA)

LT Main Panel LT main common service panel with PLC control and DG automation system

LT block panels

LT common service panels LT lighting panel

LT meter panels

LT rising mains with main adaptor switch

LT lifts panels at top roof Ventilation panel & starters

Ventilation fan (for basement fresh air & exhaust, lift well & stair case pressurization)

UPS lighting panels, Domestic water panels, Sum-Pump Panel, sewerage panel, 15/10/1 KVA three phase UPS, Submersible pump for sump,

Ventilation Panels, BOOM BARRIER, Access Control System

Weekly/periodically preventive maintenance shall be essentially carried out by deploying full team on Tuesday to check each & every civil , electrical ,

pumps items etc and maintained the record.

Any other item(s)/ work(s) in connection with above shall be carried out as per direction of the Engineer -in - charge .

a. Type II & III Per Month Per Tower 828.00 6,702.89 55,49,990.34

b Type IV Per Month Per Tower 612.00 9,068.61 55,49,990.34

c Type V Per Month Per Tower 684.00 8,114.02 55,49,990.34

d Type VI & VII Per Month Per Tower 684.00 8,114.02 55,49,990.34

Digitally signed by ANUJ

Consumtion of fuel (Diesel) in DG sets in case of power cut as per direction of Engineer In-charge. The agency has to maintain the diesel consumption

register which shall be countersigned by Engineer In-charge. (RATES AS PER PPAC Retail Selling Price of Diesel on 03-01-2025)

SUB TOTAL OF ANNUAL RUNNING & OPERATION OF EXTERNAL ELECTRIFICATION, ELECTRIC SUB-STATION EQUIPMENTS, DG SET ON

GRID SYSTEM ETC.

7.0 HEAD-I : HORTICULTURE WORKS

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds,

foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover

and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and

manure and maintenance of other garden related works as directed by office-in-charge (Including Cost of Good Earth, Manure, Fertilizer, Insecticide,

Pesticide, lawn mover and brush cutter with fuel and other T & P material/articles) to maintain the plants, hedge and lawns in good and healthy

conditions at all the time during the maintenance period as mentioned in general terms and conditions.

Entire residential units of Type-II, III, IV, V, VI, VII campus and inside the compound wall and outer periphery of front side compund wall & at

entrance gate etc. (Rates are for total Green Area 1,13,600 Sqm however the payment will be made in ratio of the area in hand for maintenance)

ii NS Providing & Fixing of irrigation line HDPE sprinkler Nos. 200.00 413.00 82,600.00

iii NS Providing & Fixing of irrigation line HDPE Popup sprinkler Nos. 200.00 1,545.80 3,09,160.00

TOTAL OF HORTICULTURE works 2,92,75,659.73

8 CLEANING OF SEWER LINE BY JETTING SEWER CLEANING MACHINE

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted

with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for

cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high

pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth.

9 DISPOSAL OF GARBAGE ETC.

"Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading,

transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-Charge.

Note - Item to be applicable in urban areas having directions for restricted hours for movement/plying of load carriying motor vehicle of 3.5 cum or

more." (only waste material which can not be recyled at in house Solid waste treatmnet plant or in case SWMP is not working)

10.0 Gateman cum Guard

Providing services of Gateman cum Guard at entry and exit point, basement & other required location round the clock with all requisite eccessories etc

complete i/c complete basement parking arrangement.

SUB TOTAL OF Gateman cum Guard - 10,33,17,200.23

11.0 LIFTS OPERATOR CUM GUARD

Providing services for running operations i/c cleaning and safety, security, watch & ward of following lifts on all days of the year including Sunday &

Holidays as per terms and conditions.

Lift of M/s. Schindler Elevators (8 Passenger (544kg) with Gearless MRL Elevator System (2 nos in each tower)

Lift of M/s. Schindler Elevators (1088kgs Service Lift with Gearless MRL Elevator System (1No. for each tower)

24x7 shall be deployed.

A Type II (11 towers) Per Month Per Tower 396.00 1,09,713.59 4,34,46,582.96

B Type III (12 towers) Per Month Per Tower 432.00 1,09,713.59 4,73,96,272.32

C Type IV (17 towers) Per Month Per Tower 612.00 1,09,713.59 6,71,44,719.11

D Type V (19 towers) Per Month Per Tower 684.00 1,09,713.59 7,50,44,097.83

E Type VI (10 towers) Per Month Per Tower 360.00 1,09,713.59 3,94,96,893.60

F Type VII (9 towers) Per Month Per Tower 324.00 1,09,713.59 3,55,47,204.24

SUB TOTAL OF LIFTS OPERATOR CUM GUARD - 30,80,75,770.05

12 Day-Today CIVIL WORKS

CLEANING OF UNDER GROUND TANK

Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of silt and rubbish, all as per direction of Engineer-

in-Charge. The cleaning shall consist following operations:-

(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.

a 14.78 (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. sqm 40,787 84.85 34,60,815.30

(iii) Chlorination of RCC internal surface by liquid chlorine.

(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.

(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

13 INTERNAL & EXTERNAL FINISHING

1 NS Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. sqm 30882.42 186.00 57,44,129.47

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to

prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and

3.0 NS manufacture, including applying additional coats wherever required, to achieve even shade and colour. sqm 12,09,024.05 43.00 5,19,88,034.04

Old work (One or more coats)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and

4a NS manufacture, including applying additional coats wherever required, to achieve even shade and colour. sqm 88,459.36 68.00 60,15,236.44

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and

4b NS manufacture, including applying additional coats wherever required, to achieve even shade and colour. sqm 41,901.80 100.00 41,90,180.18

5 13.87 White washing with lime to give an even shade :

6 13.99 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

6.1 NS One or more coats on old work. sqm 144000.00 72.00 1,03,68,000.00

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

8 NS Melamine polishing on wood work (one or more coat). sqm 15000.00 91.00 13,65,000.00

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming

9 13.52.2 coat, preparation of surface, etc. complete. sqm 4625.00 239.85 11,09,320.13

On concrete work

SUB TOTAL OF INTERNAL & EXTERNAL FINISHING SUB TOTAL 19,77,603.76 9,44,91,645.95

14 Civil works for Maintenance

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing

with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm Digitally signed by ANUJ

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing

with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 800x800 mm

Providing and laying Vitrified tiles in floor in different sizes

(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand &

manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3

kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .

3 11.41A.3.1 Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles sqm 50 1494.147 74707.35

gently and easily.

Glazed Vitrified tiles Matt/Antiskid finish of size

Size of Tile 600 x 600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make,

in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over

12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade complete.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the

5 11.26.1 slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : sqm 50 1987.215 99360.75

Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with machine cut edges of uniform colour and size upto

6 8.20.1 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per sqm 50 2508.89 125444.70

Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately).

Red sand stone - 30mm thick gang saw cut stone

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or

7 9.1.3 with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). cum 8 85045.611 6,80,364.89

Kiln seasoned and chemically treated hollock wood

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer

8 10.25.2 using structural steel etc. as required. kg 2500 176.05 4,40,130.00

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complet as

per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid

9 11.51.1 and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade sqm 50 6735.417 3,36,770.85

including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

Providing & fixing wardrobe/cabinets as per design factory made 19 mm thick ISI marked commercial board laminated both sides with 1.0 mm thick

decorative laminate on doors and all other inner and outer sides to be laminated with matching color plain laminates of 0.8 mm matt finish including

all stainless steel fitting like, hinges, SS pipes for hanging, sliding trousers rack, laminated drawers,handles, locks, bolts, magentic catcher drawer

rails etc. complete in all respect or as per direction of EIC. (Only face area to be measured for payment)

Supplying, Installation, Testing and commissioning of butterfly valve (wafer type) with electric operated actuator. Design standard BS5155

:IS13095. Compatible to be inserted between flang PN-10, Maximum working temperature-90 'C, Maximum working pressure-10 bar, Hydrostatic: 11

bar and 15 bar seat test pressure.

Supplying, Installation, Testing and commissioning of butterfly valve (wafer type) with electric operated actuator. Design standard BS5155

:IS13095. Compatible to be inserted between flang PN-10, Maximum working temperature-90 'C, Maximum working pressure-10 bar, Hydrostatic: 11

bar and 15 bar seat test pressure.

Supplying, Installation, Testing and commissioning of Ultasonic water level sensor. Sensing range 200-6000 mm, Adjustment range 240-6000 mm ,

operating voltage10-30 volt DC, Output type: Anologue output 4-20 mA, ambient temperature 25-70 'C/248-343K

Supplying, Installation, Testing and commissioning of Ultasonic water level sensor. Sensing range 1000-10000 mm, Adjustment range 1000-10000

mm , operating voltage10-30 volt DC, Output type: Anologue output 4-20 mA, ambient temperature 25-70 'C/248-343K

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z

sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be

smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,

15 21.1.2.2 C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash kg 1000 647.139 6,47,139.00

fasteners to be paid for separately) :

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required

including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of

opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm

to 40 mm thick :

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters,

window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1

cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and

polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry/Ruby red

Area of slab over 0.50 sqm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters,

window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1

cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and

polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of all colour and texture except black, Cherry/ Ruby red

Area of slab over 0.50 sqm

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based

adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in

marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete

(best make of approved quality).

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or

22 9.96.1 dyed to required colour or shade, with nuts and screws etc. complete : Each 100.00 265.51 26,550.60

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

23 9.97.1 required colour or shade, with necessary screws etc. complete Each 100.00 120.00 12,000.30

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

24 9.97.2 required colour or shade, with necessary screws etc. complete Each 100.00 106.49 10,648.80

Digitally signed by ANUJ

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

25 9.97.4 required colour or shade, with necessary screws etc. complete Each 100.00 76.50 7,650.00

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour or

shade with necessary screws etc. complete :

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour or

shade with necessary screws etc. complete :

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour or

shade with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868)

29 9.101.1 transparent or dyed to required colour and shade, with necessary screws etc. complete. Each 100.00 36.21 3,621.00

Single rubber stopper

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

30 12.42.1.1 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Each 20.00 81.40 1,627.92

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

31 12.42.1.2 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Each 20.00 122.35 2,446.98

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

32 12.42.3.2 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Each 20.00 209.56 4,191.18

Single tee with door 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

33 12.42.5.2 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Each 20.00 134.64 2,692.80

Bend 87.5° 110 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

34 12.42.6.2 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Each 20.00 116.08 2,321.52

Shoe (Plain) 110 mm Shoe

Providing and fixing unplasticised- PVC Pipe clps of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood

plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and

amking good the wall etc. complete 110mm

36 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighnin not less than 440 grams Each 20.00 48.86 977.16

Providing & Fixing of 6mm thick Bison Board Ceiling Tiles with required 24mm Exposed GI powder coated GRID as per manufacturer's specifications at

all heights and at all levels. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k =

0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm with Bio Block

coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The tile shall be laid on 24 mm wide T -

section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm

and a load carrying capacity of 15.34Kgs/M2. The T Sections have a Galvanizing of 90 grams per M2 . INSTALLATION: To comprise main runner

37 NS spaced at 1200mm centres securely fixed to the structural soffit using suspension system (specifications below) at 1200mm maximum centre. The sqm 200.00 1,120.00 2,24,000.00

First/Last section of the suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting

1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm

require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross

tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. Including all scaffolding and support

system required for installation of ceiling system , makiing provisions for AC ducting, cutting of holes for light fittings, making necessary frames

around the fixtures, providing all supports from ceiling or nearest roof, all complete. Nothing shall be paid extra.

12 mm cement plaster of mix :

1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix

1:6 (1 cement: 6 fine sand)

12mm cement plaster finished with a floating coat of neat cement of mix

1:4 (1 cement: 4 fine sand)

6 mm cement plaster of mix :

1:3 (1 cement : 3 fine sand)

Providing and applying 2.5 mm thick road marking strips (retro reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi

automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven

by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign

material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and

making good the walls and floors :

100 mm inlet and 100 mm outlet

Sand cast iron S&S as per IS: 3989.

44 18.78 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Mtr 94.00 175.24 16,472.18

DESIGN, ENGINEERING, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF

45 NS PUMP HOUSE AUTOMATION For DOMESTIC TANKS ONLY. (Type-6 & 7, Type-5A & B, Type-4, L.S. 1.00 14,41,333.00 14,41,333.00

46 NS Supplying & fixing of 65 mm Digital Water flow meter with required accessories. nos. 5.00 15,000.00 75,000.00

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as

47 21.3.2 per the architectural drawings and the directions of engineer-in-charge . sqm 50.00 1,352.06 67,603.05

(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness

Providing and fixing stainless steel SS 304 grade adjusatble friction window stays of approved quality with necessary stanlss steel screws etc. to side

48 21.11.1 hung windows, to the directions of Engineer -in- charge: Each 50.00 298.66 14,932.80

Providing and fixing stainless steel SS 304 grade adjusatble friction window stays of approved quality with necessary stanlss steel screws etc. to side

49 21.11.4 hung windows, to the directions of Engineer -in- charge: Each 50.00 758.83 37,941.45

50 21.15.1 Providing and fixing aluminium casement window fasteners of required length Anodized (AC 15) aluminium Each 50.00 75.02 3,751.05

Providing and laying water proofing treatment in sunken portion of WCs ,bathroom etc.by applying cement slurry mixed with water proofing cement

compound consisting of applying ; a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm .

51 22.5 this layer will allowed to air cure for 4 hours b)Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compond @ sqm 360.00 526.93 1,89,695.52

0126kg/sqm. this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. the rate includes preparation of surface,

treatment and seiling of all joints,corners, junctions of pipes and masonry with polymer mixed slurry.

Digitally signed by ANUJ

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50mm,

52 23.9 reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm Each 400.00 1427.95 5,71,179.60

c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer in-charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to

wooden cleats with C.P. Brass screws and washers complete.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and

54 17.32.4 shade with 6 mm thick hard board backing : Each 57.00 2134.86 1,21,687.02

Rectangular shape 1500x450mm

55 NS Suppling & fixing of 25 MM THICK PVC JAALI with all screws/fasteners and accessories, complete as per direction of EIC. sqft 500.00 320.00 - 1,60,000.00

Providing and fixing white vitreous china Parryware floor mounted Bristol (CODE C8492) OR EQUIVALENT water closet of approved shape including

56 NS providing & fixing white vitreous china cistern with dual flush including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. fitting, of Each 40.00 7,577.00 3,03,080.00

flushing capacity 3 litre/6litre (adjustable to 4 litre/8 litres),

57 NS Providing and fixing Rectangular HDPE Water Tank of 100 Ltrs. Capacity and complete with cover, nut bolts etc. of approved makes. Each 10.00 2,562.00 25,620.00

COLD/HOT WATER SUPPLY SYSTEM

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the wall etc.

Internal work _ Exposed on wall (Shaft, Terrace)

15 mm dia nominal bore

COLD/HOT WATER SUPPLY SYSTEM

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the wall etc.

Internal work _ Exposed on wall (Shaft, Terrace)

20 mm dia nominal bore

COLD/HOT WATER SUPPLY SYSTEM

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the wall etc.

Internal work _ Exposed on wall (Shaft, Terrace)

25 mm dia nominal bore

COLD/HOT WATER SUPPLY SYSTEM

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the wall etc.

Internal work _ Exposed on wall (Shaft, Terrace)

32 mm dia nominal bore

COLD/HOT WATER SUPPLY SYSTEM

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the wall etc.

Internal work _ Exposed on wall (Shaft, Terrace)

40 mm dia nominal bore

COLD/HOT WATER SUPPLY SYSTEM

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the wall etc.

Internal work _ Exposed on wall (Shaft, Terrace)

50 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic flots complete:

15 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic flots complete:

20 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic flots complete:

25 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic flots complete:

32 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic flots complete:

40 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic flots complete:

50 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

50 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

65 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

80 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

100 mm dia nominal bore

Providing and fixing Y strainer with Flange both sides, packing, nut-bolts including all fittings for outlet of Overhead line etc. complete conforming to

IS : 2373:65 mm dia nominal bore

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished

reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured

of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and

75 14.90.1 sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint sqm 50.00 548.20 27,409.95

strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N.

Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of

membrane shall be got done through the authorised applicator of the manufacturer of membrane :

Providing & Executing injection grouting for water proofing of raft,walls, slabs etc by grouting 15 mm dia 6 inch long GI nipple and injecting cement

slurry mixed with water proffing compound @1 kg/50kg of Cement by suitable pressure pump complete as per direction of EIC

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame

77 9.21.1 of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: SQM 147.00 2440.50 3,58,753.94

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to

78 9.17.1 frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): SQM 1125.00 819.01 9,21,385.13

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to

79 9.17.2 frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): SQM 500.00 1041.37 5,20,684.50

Treatment of complete quarter area including all wooden cabinets, almirahs, kithcen, toilets, hall, bedroom and balconies using injection as well as

80 NS spray chemicals. each 150 3,844.00 5,76,600.00

Note: The treatment shall cover termites, pest, wood borers etc. in complete quarter. Nothing extra shall be paid for any recurring issue in the quarter

Type 2 & 3 quarter

Treatment of complete quarter area including all wooden cabinets, almirahs, kithcen, toilets, hall, bedroom and balconies using injection as well as

81 NS spray chemicals. each 150 4,484.00 6,72,600.00

Note: The treatment shall cover termites, pest, wood borers etc. in complete quarter. Nothing extra shall be paid for any recurring issue in the quarter

Type 4 & 5 quarter

Digitally signed by ANUJ

Treatment of complete quarter area including all wooden cabinets, almirahs, kithcen, toilets, hall, bedroom and balconies using injection as well as

82 NS spray chemicals. each 75 5,125.00 3,84,375.00

Note: The treatment shall cover termites, pest, wood borers etc. in complete quarter. Nothing extra shall be paid for any recurring issue in the quarter

Treatment of complete quarter area including all wooden cabinets, almirahs, kithcen, toilets, hall, bedroom and balconies using injection as well as

spray chemicals.

83 NS Note: The treatment shall cover termites, pest, wood borers etc. in complete quarter. Nothing extra shall be paid for any recurring issue in the quarter each 30 6,406.00 1,92,180.00

Supplying and fixing Mild Steel trays below basement shafts and expansion joints to prevent spillage of water in the basement area including all

supporting arrangement complete in all respect. The tray is to be coated with primer and waterproof epoxy paint before fixing

Supply & Fixing of Porta Cabin having minimum size of 5 x 4.5 feet with following specifications:

1) Ms framing flooring made with 18 mm thick board including vinyl floor.

2) Puff insulation of wall heat resistance with cement board wall thickness 50mm.

3) Roofing with 18 mm thick Cement fibre board.

85 Non-DSR 4) 3 sides Aluminium anodised sliding window with locking system. Each 8 1,02,495.00 8,19,960.00

5) Texture paint shade as per required.

6) Electrical point box fixed inside the cabin with outer blub holder.

7) 4 Nos. industrial wheel capacity upto 200kg.

Complete as required and as per direction of EIC.

SUB TOTAL OF Civil works for maintenance 94,13,171.90 85,35,396.33

15 Electrical Works

Point wiring in MS conduit, with modular type switch Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC

insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the

point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required.

2.0 NS Supply & Installation of 450 mm Metallic exhaust fan including making good the damage, connection, testing, commissioning etc. as required. each 20 6178.00 1,23,560.00 -

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding

modular plate etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class

of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service

4.0 DSR FOR BLDC fans Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 3742019), THD less than 10%, remote or electronic each 30 2741.76 82,252.80 -

regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.),

insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing following way prewired vertical type TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with

5.0 2.3.2 loose wire box of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din each 5 1,795.20 8,976.00 -

bar for mounting MCB's, terminal connectors for all incoming and outgoing circuits, duly prewired with 8 way Double door

Supplying and fixing following way prewired vertical type TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with

6.0 2.3.3 loose wire box of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din each 5 2,094.06 10,470.30 -

bar for mounting MCB's, terminal connectors for all incoming and outgoing circuits, duly prewired with 12 way Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete

7.0 2.4.1 with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without each 5 3,129.36 15,646.80 -

MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete

8.0 2.4.2 with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without each 5 3,766.86 18,834.30 -

MCB/RCCB/Isolator) 6 way (4 + 18), Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete

9.0 2.4.3 with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without each 5 4,693.02 23,465.10 -

MCB/RCCB/Isolator) 8 way (4 + 24), Double door

10.0 2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature Single Pole each 5 261.12 1,305.60 -

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS

11.0 1.54.1 PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper each 200.00 792.54 1,58,508.00 -

conductor single core cable etc. as required. Group A

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS

12.0 1.54.2 PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper each 200.00 957.78 1,91,556.00 -

conductor single core cable etc. as required. Group B

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required 2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required 4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit

as required. 3 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit

as required. 3 x 2.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit

as required. 3 x 4 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit

as required. 3 x 6 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit

as required. 6 x 6 sq. mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate

etc. as required. Telephone socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate

etc. as required. TV antenna socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate

etc. as required. Bell push Digitally signed by ANUJ -

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making

good the same in case of recessed conduit as required. 25 mm

Re-filling of all types of fire extinguishers ( e.g. 4.5kg /9 kg CO2 Type ,6kg /9 kg ABC type, 9kg water co2 type etc) including transporation to & fro

get to be done as per DFS/ manufacturers recommondations .

Supply & fixing of 120 min. fire rated steel Fire door (Single or Double Leaf type) of 120 minutes fire rating duly tested and certified from reputed labs/test house

.The Shutter is fabricated with 2 nos. 1.2mm thick galvanized steel sheet with infill of fire rated properitory insulation filler both faces of sheet with lock seam joints

at stile edges and internal reinforcement at top, bottom and stile edges for strength for its stability and integrity of the fire door. The door frames are

manufactured from 1.6mm thick galvanized steel sheet pressed form to single rebate profile of section 60x35mm / 60x50mm. The shutter is having a profile as Top

Rail and Vertical Styles as 60x60mm and Bottom Rali as 110x60mm. provided with GI beading of suitable size made out of 2mm thick GI sheet. The door frames

and door shutters are finished with Powder Coating. Provisions for fixing all fixtures shall be built in on the doors prior to the supply.

32.0 NS Supply & fixing of SS Ball Bearing Hinges of size 4 x 3 x 3 inch complet with SS Screws. set 36.00 244.00 8784.00

33.0 NS Supply & fixing of Panic Bar single / double leaf panic exit devices. each 50.00 11943.00 597150.00

34.0 NS Supply & fixing of Panic Trim with handle for Operation From The Other Side Of The Panic Bar. Nos. 50.00 4082.00 204100.00

35.0 NS Supply & fixing of Concealed TOWER BOLT Nos. 33.00 243.00 8019.00

36.0 NS Supply & fixing of Vision Glass with beading Nos. 50.00 4006.00 200300.00

37.0 NS Supply & fixing of Door Closer having handling capacity of minimum 80 KG. Nos. 50.00 3464.00 173200.00

Telephone wiring in Existing Conduits: Supplying and drawing following pair 0.61 sq mm FR PVC insulated annealed copper conductor, unarmored

telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A

modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 &

15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

41.0 i Supply, Installation, Testing & commissioning of 10KVA Online UPS , Complete as required. SET 2 1,28,119.00 2,56,238.00

42.0 ii Supply, Installation, Testing & commissioning of 15KVA Online UPS , Complete as required. SET 2 1,92,178.00 3,84,356.00

Supply & Installation of high discharge sealed maintenance free battery of 12V 12AH for Lifts/UPS inculding deduction for unserviceable batterys

(Rs.100) complete as required.

Supply & Installation of high discharge sealed maintenance free battery of 26V 12AH for Solar pole light including deduction for unserviceable

batterys (Rs.100) complete as required.

Supply & Installation of All in one Solar Street light including Solar Panel, Battery, Hybrid Controller and LED light with complete accessories as

required. (Ref make: Bajaj Model: BSS FLAIR P 70L WH HW LF MP HYB or equivalent from other approved makes)

46.0 NS Providing and fixing of kitchen chimney 1000 cum/hr, complete in all respect. Each 10.00 9,723.00 97,230.00

47.0 NS Providing and fixing of 25 ltr Electric Geyser, complete in all respect. Each 10.00 10,544.00 1,05,440.00

48.0 NS Providing and fixing of 3 ltr Electric Instant Geyser, complete in all respect. Each 10.00 3,724.00 37,240.00

49.0 NS Providing and fixing of Basketball ring with net and frame. Each 10.00 2,000.00 20,000.00

Supply & Installation of Informatory signage comprising of ACP sheet sides Facia, angle iron frame, backlit star flex, sheet in MS tube frame having

50.0 NS monogram and printing fix on both faces including LED module and all fixing arrangement clamp etc. complete at different locations at site and as per sqm 75.08 8,594.00 6,45,268.59

direction of EIC.

51.0 NS Supply, Installation, Testing & commissioning of Brass Air Release Valve of 25mm. Nos. 78.00 1,200.00 93,600.00

Supplying,installation,testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor having high preformance, non

52.0 15.1 regulating programmable type, suitable for connected load upto 10Amp, for mounting height up to 2.8 mtr and for 5 m diameter coverage area along Each 118.00 4,694.04 - 5,53,896.72

with necessary fixing arrangements i/c programming at site etc. complete as required.

53.0 NS Providing & fixing of MS MOTORISED Rolling shutter with primer & painting, locking arrangement for Electric Substation, complete in all respect. SQFT 24.00 295.00 - 7,080.00

54.0 NS Supply & fixing of NOTICE BOARD for Towers SQFT 984.00 197.00 - 1,93,848.00

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps,

vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of

minimum 45 Kg / cu m density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable

55.0 16.2.14 adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect. Note:- The Pipes of sizes mtr 3800.00 625.00 - 23,75,000.00

150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589,

from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS C338sheet for pipes of 400 mm dia and above.

25 mm dia (19 mm thick insulation)

56.0 3023 Pipe aluminium Cladding 0.63mm Sqm 3800.00 360.00 - 13,68,000.00

57.0 NS Supply & painting and finishing of THERMO COOL PAINT ON OVERHEAD TANKS, complete as required Sqm 2088.00 360.00 - 7,51,680.00

58.0 NS AMC of REPAIRING AND PAINTING OF MURALS ART WORK in all respect. Sqft 9266.00 295.00 - 27,33,470.00

Providing & fixing of all new layers of badminton/volleball/basket ball court/sakting ring flooring in all respect. (Works also includes the Chipping &

removing of old layer of exisiting court for this no extra cost will be paid).

Providing fasteners for kitchen cabinets & fixing is in the scope of working agency. Fastening is done as a provision of providing support to kitchen

60.0 NS cabinets for safety purpose. fastners dia 10mm and 100 mm length. (For Type II & III, Type IV, Type V and Type VI & VII) Reference make: Hilti or Each 1,920.00 128.00 - 2,45,760.00

other equivalent from approved makes)

Supply, installation, testing and commissioning of Variable Frequency Drive (VFD) for Decanter operation of STP Plant.

Rating: 0.75 KW/1 HP

CHASSIS/IP20, IE2 2.4% Temp. 40 degree C

62 MOTOR & PUMP REPAIRING ITEMS

S.NO. 7.5 H.P Motor Repairing Lower Vertical (Total Motor- 4) Qty. Rate Amount

a. Motor Rewinding Nos. 2 5,500.00 11,000.00

c. Motor Opening Fitting and Alignment Charges Nos. 2 2,000.00 4,000.00

12.5 H.P Motor (Total Motor- 5)

a. Motor Rewinding Nos. 2 7,500.00 15,000.00

c. Motor Opening Fitting and Alignment Charges Nos. 2 3,000.00 6,000.00

15 H.P Motor Lowara (Total Motor- 4)

a. Motor Rewinding Nos. 2 8,000.00 16,000.00

d. Motor Opening Fitting and Alignment Charges Nos. 2 3,000.00 6,000.00

20 H.P Motor (RKB-50/15) (Total Motor- 55)

a. Motor Rewinding Nos. 5 12,188.00 60,940.00

c. Motor Opening Fitting and Alignment Charges Nos. 5 4,500.00 22,500.00

20 H.P High Pressure Pump Grandfoss Motor (Total Motor- 46)

a. Motor Rewinding Nos. 5 12,188.00 60,940.00

c. Bearing 6309 SKF Nos. 5 1,250.00 Digitally signed by ANUJ

d. Motor Opening Fitting and Alignment Charges Nos. 5 4,500.00 22,500.00

7.5 H.P High Pressure Pump Grandfoss Motor (Total Motor- 8)

a. Motor Rewinding Nos. 2 5,500.00 11,000.00

c. Bearing 6206 SKF Nos. 2 450.00 900.00

d. Motor Opening Fitting and Alignment Charges Nos. 2 2,000.00 4,000.00

7.5 H.P Main Fire Pump IHT 10 BA Kirloskar Motor (Total Pump- 2)

a. Mechanical Seal Nos. 2 3,651.00 7,302.00

e. Neck Ring (Bronze) Nos. 2 4,500.00 9,000.00

f. Pump Opening Fitting and Alignment Charges Nos. 1 6,624.00 6,624.00

Diesel Engine Fire Pump IHT 12 (Total Pump- 1)

a. Mechanical Seal Nos. 4 3,651.00 14,604.00

e. Neck Ring (Bronze) Nos. 4 4,500.00 18,000.00

f. Pump Opening Fitting and Alignment Charges Nos. 2 6,624.00 13,248.00

7.5 H.P Jockey Pump Vertical Kirloskar Make Model KCIL 15-16 (Total Pump- 2)

a. Mechanical Seal Nos. 1 3,250.00 3,250.00

e. Neck Ring (Bronze) Nos. 1 4,300.00 4,300.00

f. Pump Opening Fitting and Alignment Charges Nos. 1 4,000.00 4,000.00

12.5 H.P Jockey Pump RKB-50/15 L2 (Total Pump- 8)

a. Mechanical Seal Nos. 4 3,651.00 14,604.00

c. Bearing NU 308 SKF Nos. 2 5,178.00 10,356.00

e. Sleeve S.S N.D.E Nos. 2 3,407.00 6,814.00

g. Coupling set Nos. 2 2,677.00 5,354.00

i. Pump Opening Fitting and Alignment Charges Nos. 2 6,624.00 13,248.00

7.5 H.P Sprinkler Pump Kirlosker UP 150/45 (Total Pump- 1)

a. Mechanical Seal Nos. 2 5,500.00 11,000.00

f. Pump Opening Fitting and Alignment Charges Nos. 1 6,624.00 6,624.00

Diesel Engine fire Pump Kirlosker Model RKB 125/27 (Total Pump-3)

a. Mechanical Seal Nos. 2 12,500.00 25,000.00

d. Sleeve S.S N.D.E Nos. 1 6,800.00 6,800.00

f. Bearing NU 312 SKF Nos. 1 8,944.00 8,944.00

g. O Ring Set Nos. 1 800.00 800.00

h. Pump Opening Fitting and Alignment Charges Nos. 1 10,000.00 10,000.00

20 H.P Domestic Pump Kirloskar Make RKB 50/15 (Total Pump- 52)

a. Mechanical Seal Nos. 8 3,651.00 29,208.00

c. Bearing N.U 308 SKF Nos. 4 5,178.00 20,712.00

e. Sleeve S.S NDE Nos. 4 3,407.00 13,628.00

d. Coupling set Nos. 4 2,677.00 10,708.00

e. Pump Opening Fitting and Alignment Charges Nos. 4 6,624.00 26,496.00

Sump Pump 2 H.P- 3 H.P (Total Pump- 137)

a. Motor Rewinding Nos. 15 2,000.00 30,000.00

b. Mechanical Seal Nos. 15 1,875.00 28,125.00

h. Impellar & Body Repair Nos. 15 2,000.00 30,000.00

i. Pump Opening Fitting and Alignment Charges Nos. 15 2,000.00 30,000.00

Sump Pump S.H.P Cutter Pump

a. Motor Rewinding Nos. 1 5,000.00 5,000.00

b. Mechanical Seal Nos. 1 3,200.00 3,200.00

e. O Ring Set Nos. 1 200.00 200.00

g. Pump Opening Fitting and Alignment Charges Nos. 1 3,000.00 3,000.00

Sump Pump 7.5 H.P

a. Motor Rewinding Nos. 1 6,500.00 6,500.00

b. Mechanical Seal Nos. 1 3,450.00 3,450.00

e. O Ring Set Nos. 1 250.00 250.00

g. Pump Opening Fitting and Alignment Charges Nos. 1 3,000.00 3,000.00

Sump Pump 10 H.P

Digitally signed by ANUJ

a. Motor Rewinding Nos. 1 6,500.00 6,500.00

b. Mechanical Seal Nos. 1 3,875.00 3,875.00

d. O Ring Set Nos. 1 350.00 350.00

f. Pump Opening Fitting and Alignment Charges Nos. 1 4,000.00 4,000.00

Sump Pump 12.5 H.P

a. Motor Rewinding Nos. 1 6,500.00 6,500.00

b. Mechanical Seal Nos. 1 3,875.00 3,875.00

e. O Ring Set Nos. 1 550.00 550.00

g. Pump Opening Fitting and Alignment Charges Nos. 1 4,000.00 4,000.00

High Pressure Vertical Pump Model CR 45 20 H.P Grand fose Make (Total Pump-46)

a. Mechanical Seal Nos. 1 11,559.00 11,559.00

c. Carbone Bush For difusser Nos. 4 3,650.00 14,600.00

e. Bearing with Driver silicon Nos. 1 22,713.00 22,713.00

f. Pump Opening Fitting and Alignment Charges Nos. 1 6,624.00 6,624.00

High Pressure Pump 7.5 H.P Grandfoss Make Irrigation Pump (Total Pump-8)

a. Mechanical Seal Nos. 1 8,575.00 8,575.00

c. Diffuzer New Nos. 6 4,850.00 29,100.00

d. Diffuzer Repair Nos. 6 1,000.00 6,000.00

e. Impeller New Nos. 6 3,500.00 21,000.00

f. Impeller Repair Nos. 6 500.00 3,000.00

f. Neck Ring Nos. 6 625.00 3,750.00

f. Pump Opening Fitting and Alignment Charges Nos. 1 4,000.00 4,000.00

Lowara Make Vertical High Pressure Pump 15 H.P Model SV 66 (Total Pump-6)

a. Mechanical Seal Nos. 2 11,450.00 22,900.00

f. Pump Opening Fitting and Alignment Charges Nos. 2 6,624.00 13,248.00

Lowara Make Vertical High Pressure Pump 7.5 H.P Model SV 33 (Total Pump-4)

a. Mechanical Seal Nos. 2 11,450.00 22,900.00

f. Pump Opening Fitting and Alignment Charges Nos. 2 4,000.00 8,000.00

Supply, installation, Testing and commissioning of 3 phase and Neutral 415V 4 wire free standing Floor mounted Indoor MV panel made out of 14 SWG MS sheet aafter

seven tank process and painting with Epoxy powder coating:

Incoming: 630A,50KA TP+N MCCB with overload short circuit, earth leakage with relay CBCT-1set

Busbars:630A, TPN Aluminium busbar-1set

Outgoings: 125A,10KA TPN MCCBs- 8nos

70A AC1 contractor with 230V coil and time switch similar ro L&T TSQ 100-1set

Metering: Digital MFM (V,A,F, KWH)-1 no., 0-500V Digital voltmeter with selector switch and MCB- 1 set

LED phase indications lamps with individuals MCBs and control and with toggle swithes-2sets

CT operated load manager-1set

MAIN BLOCK PANEL:

Supply, installation, Testing and commissioning of 3 phase and Neutral 415V 4 wire free standing Floor mounted Indoor MV panel made out of 14 SWG MS sheet aafter

seven tank process and painting with Epoxy powder coating:

Incoming: 250A,35KA TP+N MCCB with overload short circuit, earth leakage with relay CBCT-1set

Busbars:250A, TPN Aluminium busbar-1set

63A, 10KA TP+0N MCCB - 2 nos

63A, 8 Nos FP MCB

70A AC1 contractor with 230V coil and time switch similar ro L&T TSQ 100-1set

Metering:Digital MFM (V,A,F, KWH)-1 no., 0-500V Digital voltmeter with selector switch and MCB- 1 set

LED phase indications lamps with individuals MCBs and control and with toggle swithes-2sets

CT operated load manager-1set

PLUMBING PANEL-1

Incoming: 100A,35KA TP+N MCCB with overload short circuit, earth leakage with relay CBCT-1set

Busbars:150A, TPN Aluminium busbar-1set

Outgoings: 63A,10KA TP MCBs- 3nos

40A, 10KA TP MCB-3no

70A AC1 contractor with 230V coil and time switch similar or L&T TSQ 100-1set

Metering:Digital MFM (V,A,F, KWH)-1 no., 0-500V Digital voltmeter with selector switch and MCB- 1 set

LED phase indications lamps with individuals MCBs and control and with toggle swithes-6sets

CT operated load manager-1set

Digitally signed by ANUJ

PLUMBING PANEL-2

Incoming: 100A,35KA TP+N MCCB with overload short circuit, earth leakage with relay CBCT-1set

Busbars:150A, TPN Aluminium busbar-1set

Outgoings: 63A,10KA TP MCBs- 3nos

12KW/SD-3, 70A AC1 contractor with 230V coil and time switch similar ro L&T TSQ 100-1set

Metering:Digital MFM (V,A,F, KWH)-1 no., 0-500V Digital voltmeter with selector switch and MCB- 1 set

LED phase indications lamps with individuals MCBs and control and with toggle swithes-6sets

CT operated load manager-1set

FLUSHIING WATER PANEL-1 PUMP NO-3/4-TYPE-IV

Incoming: 250A,35KA TP+N MCCB with overload short circuit, earth leakage with relay CBCT-1set

Busbars:150A, TPN Aluminium busbar-1set

Outgoings: 15KW-20HP-STAR Delta WITH VFD-6nos,

67 NS Metering:Digital MFM (V,A,F, KWH)-1 no., 0-500V Digital voltmeter with selector switch and MCB- 1 set Set 1.00 850000.00 8,50,000.00

LED phase indications lamps with individuals MCBs and control and with toggle swithes-6sets

CT operated load manager-1set

All vd feeders will have filters/ chock

Auto and manual switch reqire for vfd

ON/OFF TRIP STATUS

IRRIGATION PANEL

Incoming: 100A,35KA TP+N MCCB with overload short circuit, earth leakage with relay CBCT-1set

Busbars:150A, TPN Aluminium busbar-1set

Outgoings: 5.5KW-7.5HP-STAR Delta WITH VFD-4nos,

Metering:Digital MFM (V,A,F, KWH)-1 no., 0-500V Digital voltmeter with selector switch and MCB- 1 set

LED phase indications lamps with individuals MCBs and control and with toggle swithes-6sets

CT operated load manager-1set

All vd feeders will have filters/ chock

Auto and manual switch reqire for vfd

ON/OFF TRIP STATUS

69 Supply and laying of 3 mm thick 11KV grade rubber Mats as per IS 15652 of size 1000mmX2000mm NO 10.00 1800 18,000.00

SUB TOTAL 41,55,380.00

SUB TOTAL OF SPECIAL REPAIRS ELECTRICAL WORKS 52,69,935.04 2,71,73,282.71

16 SPECIAL REPAIR CIVIL WORKS

Providing and fixing of C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

a) 15 mm nominal bore

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or

of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and

reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

25 mm average thickness

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-

charge complete in all respect.

SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of

approved polymer

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with

polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.

4 26.32.1 Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment sqm 200 396.423 79284.6

under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a

blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).

12 mm average thickness.

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with

polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.

5.0 26.32.2 Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment sqm 200 599.097 119819.4

under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a

blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).

25 mm average thickness in 2 layers.

Providing and fixing white vitreous china extended wall mounting water closet of approved shape including providing & fixing white vitreous china

cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and

gasket etc complete.(Ref. make: Parryware Cardiff C0270, C0754, C2052, C8112, C8100 / Cera, Campbell 2099, 2198, 2398, 2299, 2445 / Hindware-

20084 (P-10.5, complete set), 21052)

Providing and fixing of Health Faucet with metal hose and holder in Polished Chrome alongwith all necessary accessories complete including cutting,

7.0 Non-DSR making good the walls, floors, slab wherever required as per direction of Engineer-Incharge. , (Ref. make: Parryware - T9940A1 / Cera - CG 105/ each 100 519.30 51,930.00

Hindware - F160059)

Providing and fixing of C.P Toilet Paper holder with wall flange, alongwith all necessary accessories complete including cutting, making good the walls,

8 Non-DSR floors, slab wherever required as per direction of Engineer-Incharge. (Ref. make: Parryware - T6005A1 / Cera - CA 106/ Hindware - F840008 / or each 100 628.07 62,807.00

Providing and fixing of C.P. 2 Way bib cock with wall flange alongwith all necessary accessories complete including cutting, making good the walls,

9.0 Non-DSR floors, slab wherever required as per direction of Engineer-Incharge. (Ref. make: Parryware - G3034A1 / Cera - CQ 605 / Hindware - F100004 / or each 50 952.63 47,631.50

Providing and fixing white vitreous china flat back half stall urinal with fittings, standard size C.P. brass flush pipe, waste fittings bottle trap, with

unions and clamps (all in C.P. brass) other couplings in C.P. brass, alongwith all necessary accessories complete including cutting, making

good the walls, floors, slab wherever required as per direction of Engineer-Incharge. (Ref. make: Parryware - C0575/ Cera - 5013 / Hindware -

Providing and fixing white vitreous china Urinals Partitions alongwith all necessary accessories complete including cutting, making good the

walls, floors, slab wherever required as per direction of Engineer-Incharge.(Parryware C0571 / Cera - 5011 / Hindware 61001)

Providing and fixing of White vitreous china under counter Rectangular Wash Basin (Parryware - Maestro C0425/ Cera - Camry 1034/ Hindware -

10080) with CI bracket, including bottle trap and waste coupling 32 mm half threaded (Parryware - T0814A1, T3202A1, T9910A1 / Cera - CM104B,

CM203 / Hindware - F850003, 850001) including painting of fitting & bracket, cutting and making good the walls, floors, slab wherever required as per

direction of Engineer-Incharge.

Providing and fixing of Basin Mixer alongwith all necessary accessories complete including wall flange,cutting & making good the walls, floors, slab

wherever required as per direction of Engineer-Incharge. (Ref. make: Parryware - T0814A1 / Cera - CS130A / Hindware - F130010)

Providing and fixing of Stainless Steel Kitchen Sink with drain board alongwith all necessary accessories complete including cutting, making good the

14 Non-DSR walls, floors, slab wherever required as per direction of Engineer-Incharge. each 20 5,994.74 1,19,894.80

Single bowl with drain board. Overall size bowl size 36 x 18 (inch) (Ref. make: Parryware- C 8528 / Jayna- Glossy SBSD 05 (DX) )

Providing and fixing of Single Lever C.P. Sink Mixer with shower pollout with 1.5 mtr double lock flexible hose, table mounted alongwith all necessary

15.0 Non-DSR accessories complete including cutting, making good the walls, floors, slab wherever required as per direction of Engineer-Incharge. (Ref. make: each 20 4,568.42 91,368.40

Parryware - T0835A1 / Cera - CS231A / Hindware - F130013)

Digitally signed by ANUJ

Providing and fixing of Stainless Steel Soap Dish alongwith all necessary accessories complete including cutting, making good the walls, floors, slab

wherever required as per direction of Engineer-Incharge. (Ref. make: Parryware - T6302A1 / Cera - CA103 / Hindware - F870004)

Providing and fixing of Towel Shelf / Rack alongwith all necessary accessories complete including cutting, making good the walls, floors, slab

wherever required as per direction of Engineer-Incharge. (Ref. make: Parryware - T6008A1 / Hindware-F880008)

Providing and fixing of Robe Hook, alongwith all necessary accessories complete including cutting, making good the walls, floors, slab wherever

required as per direction of Engineer-Incharge. (Ref. make: Parryware - T6006A1 / Cera - CA105 / Hindware-F880004)

Providing, Fixing, Testing and Commissioning of C.P. bath and shower fittings comprising of :

1 No. CP Concealed Diverter Complete with hand and overhead shower arrangement.

19.0 Non-DSR 1 No. Hand Shower consisting of telephonic shower arrangement with C.P. flexible pipe of 1.5 mtrs & hook. each 20 6,252.63 1,25,052.60

1 No. Over Head Shower consisting of arm with wall flange complete in all respect

(Ref. make: Parryware - T0426A1, T9932A1 / T9904A1 / Cera - CS129C, CG418, CG440 / Hindware -F130018, F160005, F160054)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore

20 Non-DSR (Parryware - G2107A1 / Cera - CS 108A / Hindware F230004) each 50 894.74 44,737.00

15mm nominal bore

TOTAL OF SPECIAL REPAIR CIVIL WORKS 279283.65 11,95,930.10

17 SPECIAL REPAIRS - Electrical Works

Supplying, Installation, Testing and commissioning Sewerage submersible cutter type pumping sets of CI casing & impeller, SS shaft, including

with inbuilt water level sensors for operating the pumps automatically, starter with push button arrangement and all accessories suitable for

operation on 220 V-240 V, single phase/ three phase, 50 Hz. AC supply etc. all panels should be MCB isolation DOL/ SD Starter + Push Button 8 65,145.00

on/off indicating lamp, single phase preventor as required for each set of pump as reqd.

40 mm solid handling capacity, 3HP, Minimum Capacity-150 LPM, Minimum Head - 25 Mtr, complete as required.

Required for Location :- 02 Set for Type-II&III, 02 Set for Type-IV, 02 Set for Type-V, 02 Set for Type-VI&VII

2 NS Supply & Installation of Non-Metallic Exhaust Fan of 250mm. Nos. 10 1,560.55 15,605.50

3 NS Supply & Installation of Non-Metallic Exhaust Fan of 350mm. Nos. 10 1,560.55 15,605.50

Supplying, Installation, Testing and commissioning of Non-clog fully automatic Dewatering (Sewage) Pump, 5 HP, Three Phase, 415 Volts, Size

65mm. Handling type of Screened sewage, Raw sewage' Contaminated effluents, Industrial waste water, Storm water, Trench and tunnel water, Drain

water, mine water, etc. Motor is dry type submersible and cooled by liquid being handled. Motors are air tested for leakfree operation. Degree of

4 Non-DSR protection for motor is IP68 as per IS:2147 Class of insulation : F, Voltage : 415V 10%, Frequency : 50 Hz. 5%, Type of starting : As per requirement

(DOL/Star Delta/ATS), Non-clog two vane or single vane enclosed impeller, Permissible solid size up to 40 mm, Gland packed/mechanical seal, 50

HZ/60 HZ availability , Delivery size up to 65 mm, Capacity up to 720 m3/hr, Head up to 25 metres. ( reference make: Kirloskar model ETERNA 3700

CW+ or equivalent from approved makes)

Minimum Capacity - 1200 LPM

Minimum Head - 25 Mtr

Minimum Power - 5HP/3.7 KW Set 6 73,041.00 4,38,246.00

Indoor Luminaries Light fixtures

5 Non-DSR Supply of Surface Mounted Light Fixture with 1 X 28 watt LED tube light complete as required. Nos. 10 196.70 1,967.00

6 Non-DSR Supply of Surface mounted Mirror LED tube Light with 1 X 10 watt complete as required. Nos. 10 207.60 2,076.00

7 Non-DSR Supply of 9 watt Wall Bracket LED bulb complete as required. Nos. 10 76.00 760.00

8 Non-DSR Supply of Surface mounted square LED Light with 1 X 18 watt complete as required. Nos. 10 902.00 9,020.00

9 Non-DSR Supply of Surface mounted circular LED Light with 1 X 09 watt complete as required.for stairecase Nos. 10 746.35 7,463.50

10 Non-DSR Supply of Surface mounted square LED Light with 1 X 18 watt complete as required.for lift lobby. Nos. 10 902.00 9,020.00

11 Non-DSR Supply of Surface mounted circular LED Light with 1 X 12 watt complete as required. Nos. 10 827.77 8,277.70

Supply, Installation, Testing & Commissioning of 5 Star rated enery efficient Inverter Split AC with all length piping, insulation, fitting, drainage pipe

and other accessories in all respect (Ref Model: Hitachi 2 Ton 5 Star ice Clean Xpandable Plus Inverter Split AC (100% Copper, Dust Filter, 2024

Model, Yoshi 5400FXL, R32-RAS.G522PCAISF, Dual Platinum).

Note: After installation Maintenance/repairing/repalcement of AC unit having same capacity/specification shall be under scope of contractor for which

no extra payments shall be paid by the department.

(Useful life at 7 years)

TOTAL OF SPECIAL REPAIR ELECTRICAL WORKS 0 21,05,953.20

Digitally signed by ANUJ