Strengthening of Sundarkhal (Sundarkhal) Water Supply Scheme in Dhari, Nainital

Amount

SCC cum RF (2no)

Excavation of earth mixed with Shingle, Boulders etc. including Lift upto 1.50 m and Lead upto 30.00 m, including all Labour, Material, T&P etc. Complete.

100 mm thick P.C.C 1:4:8 as base concrete.

75 mm thick P.C.C 1:2:4 in Floor

C.R Stone masonry in 1:4 cement mortar, with hard stone in foundation & plingth

R.R Dry Stone masonry in stone screen wall.

40 mm Thick P.C.C 1:2:4 in Flooring.

Cement plaster 15 mm in 1:4 Cement: Sand mortar inside.

Cement plaster 12 mm in 1:4 Cement: Sand mortar Outside.

RCC Slab in 1:1.5:3 Cement: Coarse Sand: Stone Grit

Reinforcement

40 mm Thick P.C.C 1:2:4 as coping.

50 mm dia. Gl (M) pipe fitted with socket & plug as washout.

50 mm dia. GI (M) pipe as overflow.

Unforseen items 5% 0f S.No.2,3,4,5,6,7,8,9,10,11(DSR)

Unforseen items 5% 0f S.No.1,12,13,(UJN)

Excavation in Pipe Line Trenches: Excavation in ordinary soil (loam, clay, sand) for foundation including lift up to 1.5M and lead up to 30M filling waterring and ramming of Excavated the earth in to the trenches or into the sides between foundation trenches or in to the plinth (75% of Total Quantity)

Excavation in soil mixed with shingle bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling,waterring and ramming of Excavated earth in the trenches.(25% of Total Quantity)

Supplying of Air Valves as per engineering norms of approved quality with bolts, nuts, rubber insertions etc. complete anywhere in uttarakhand

20 mm Diameter

Providing & Fixing D.I. D/F Non Return Valves Confirming to IS: 14846-2000 in position including all material, labourer, T&P etc complete.

80 mm dia

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside the tank and alluminium ladder inside of the tank, M.S. M.H. cover with locking arrangement, lightning conductor as per electricity rules, water level indicator,supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2.

CWR of 40 KL at Parwara

CWR of 15 KL at Chorlekh

CWR of 4 KL at Jagar

CWR of 3 KL at Gravity Zone-2

Supply of FRP coated MS Bucket Type Chlorinator of 25 litres capacity with chlorination arrangement

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction

Providing and laying of wire crates 3.00x1.50x1.50 in size with GI wire conforming to IS: 280 & IS:4826 in 150mm x 150mm mesh laid with stone boulders. as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)-GI wire 10 gauge BWG

Construction of RCC Pillars For supporting of pipes

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately (Considering 5%)

Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383,maximum size of coarse aggregate not exceding 25 mm,mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels, rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications.

Excavation in Pipe Line Trenches Excavation in ordinary soil (loam, clay, sand) for foundation including lift up to 1.5M and lead up to 30M filling waterring and ramming of Excavated the earth in to the trenches or into the sides between foundation trenches or in to the plinth (75% of Total Quantity)

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete.G.I. PIPE CONFORMING TO IS : 1239(PART-1) Medium Duty (Class 'B')

15 mm dia G.I Pipe

20 mm dia G.I Pipe

25 mm dia G.I Pipe

32 mm dia G.I Pipe

40 mm dia G.I Pipe

50 mm dia G.I Pipe

65 mm dia G.I Pipe

80 mm dia G.I Pipe

Dismantling of following dia screwed and socketed G.I. Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and stacking them properly within 50m but excluding the cost of earth work (Note :- This item shall be paid with the condition that the recovered pipe from dismantling is reusable.)

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

Relaying of Dismantled pipe line in trences

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

Supplying of Brass/G.M. Sluice Valves Including Carting the same upto the site of work as per engineering norms (with cap) complete with bolts, nuts, rubber insertions etc. anywhere in uttarakhand.

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

Providing & Fixing Woltman type Bulk Meter inline type flange end with integral mounted diskplay and all necessary fittings etc complete.

65 mm dia

80 mm dia

Supply of all labour, material required for restoring of existing house connection which might be damage during excavation and also shifting all existing connection to new water supply system from existing water supply system complete as per unit estimate and directed by Engineer in-charge. 15 mm size water connections.

Interconnection of new pipe line to existing pipe line including necessary cutting, supply and Installation of required specials fittings all as per direction of Engineer-In- Charge.

Providing and making house service connections from water supply distribution GI pipe line upto water meter chamber inside the property using GI pipe including supply and fixing of electrofussion saddle ,brass ferrules elbow, ball valve etc complete with earthwork, road cutting with restoration works

Repairing of Existing pump house.

S.I.T.C. OF KIRLOSKAR MAKE CENTRIFUGAL PUMP SET CAPACITY 40 HP, HEAD 395 MTR, DISCHARGE 250 LPM WITH BRONZE IMPELLER, HEAVY DUTY BASE FRAME , COUPLING AND COUPLING GUARD.

S.I.T.C. CG MAKE MOTOR FOR ABOVE PUMP 40 HP 2900 RPM

S.I.T.C. OF FULLY AUTOMATIC STARTER PANEL CAPACITY:40 HP

Control Panel

S.I.T.C. OF KIRLOSKAR MAKE CENTRIFUGAL PUMP SET CAPACITY 40 HP, HEAD 395 MTR, DISCHARGE 150 LPM WITH BRONZE IMPELLER, HEAVY DUTY BASE FRAME , COUPLING AND COUPLING GUARD.

S.I.T.C. CG MAKE MOTOR FOR ABOVE PUMP 30 HP 2900 RPM

Supply of three phase digital rolling contact servo voltage stabilizer suitable for unbalance voltage & load including fixing of proper size copper lugs on input and output cables on both ends at different sites on trunkey basis including 5 years cost free maintenance

Input voltage 330-460 volts (Phase to phase)

Capacity - 40 kva(According to Availablity) (40 kva as per calculation)

INTERNAL ELECTRIFICATION

Wiring for light point, fan point etc. with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface PVC conduit with piano type switch, phenolic laminated sheet, suitable size GI box, with earth wire of 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/submain alongwith earth wire with the following size of FR PVC insulated copper conductor single core cable in surface PVC conduit as required.

2x2.5 sq. mm + 1x2.5 sq. mm earth wire

2x4 sq. mm + 1x4 sq. mm earth wire

Supply and fixing of metal box of 180 rnmx100mmx160 mm deep on surface with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 amp and 15x16 amp socket outlet and 15/16 amp piano type switch, connections, painting etc as required.

Supply and fixing of following way S.P.N. sheet steel, MCB DB, 240 V on surface complete with copper bus bar, neutral bus bar, earth bar, inter connections including earthing etc as required. (But without MCB/RCCB/Isolator)

6 Way double door ,

Supply and fixing of 5 A to 32 A, 240 V, 10 KA, C serious MCB suitable for inductive load of following pole in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of double pole, 240 V, isolator in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of 20 W LED tubelight complete in all respect (Bajaj/Philips I Equivalent make)

Supply in fixing of LED external lighting luminaires with mounting bracket etc. complete.