SPECIAL REPAIRS TO ROOF TREATMENT AND CERTAIN CAP/MW WORKS UNDER AGE BR-I,II AND AGE (E/M) SUB DIVISION AT AF STATION BHUJ

Amount

Taking down existing water proofing tretment on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and M&L for plaster 10 mm thck on concrete surfaces in cement mortar 1:3 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumenm primer confirm to IS - 3384-1986 @ 3% per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces all as specified and directed by Engr-In- Charge

M & L for cement concrete type B1 1:2:4 mix (using 20mm graded stone aggregate) as in copings/roof padding etc including use of necessary form work, weathering slightly rounded or chamfered angles and throating as directed

S&F in repair sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all sizae 915 x 460 mm, bowl size 410 x 330 x 180 mm mm Make : Nirali (Model : elegance small from regular range, glossy) or size 915 mm x 460 mm bowl size 410 x 330 x 178 mm of make : Jayana (Model : Jujpiter sink with Drain board No: SBSD 5 glossy) or equivalent and nearest size of make : Lorrentto, Neelkanth, Diamond.

Demolition of cement concrete (unreinforced) concrete of any description and in any position not otherwise specifically provided.

Dismantling floor, hearth or wall tiling of any description including cement mortar bedding (but not backing) and rubbish of the premises and removing debrises from out of defence land all as specified and as directed by Engr-in-Charge.

M&L for 25mm thick PCC 1:2:4 type B-0 (12.5 mm graded aggregate) as in subbase of floors complete.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) superior quality area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc laid over and including 15 mm thick screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L coloured glazed digital ceramic tiles of size 350 x 250mm x 7mm/300 x 450mm x 7mm thick, in vertical surfaces / skirting dados etc over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the shade.

M & L for vitrified ceramic tiles, light shade 10mm thick (square/ rectangular) polished , area of each tiles n exe 0.36 sqm in floors etc over and including 15 mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

M & L for vitrified ceramic tiles, 10mm thick (square/ rectangular) polished , area of each tiles n exe 0.36 sqm in skirting etc over and including 10mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

Taking down chowkats or frames with shutters (without taking off shutters from frames) size n. exc 1.5 sq mtr each

Taking down chowkats or frames with shutters (without taking off shutters from frames) size exc 1.5 Sqm & n.exc 4.00 Sqm each.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing on page No. 156 of SSR Part-II -2010.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification.

S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately. Note : main section of aluminium shall be used 100mmx45MM with same thickness as mentioned in lieu of drg 65mm x 38mm above reffered due to less space available for fixing wire gauge shutter fixing grill .

Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 4.4 mm x 7mm

S&F rubber beading for fixing of glass complete.

Taking up/down existing GI tubing 15 mm dia alongwith fittings and keeping in safe custody the serviceable items for reuse and removal of unserviceables items from site of work .

Taking up/down existing GI tubing 20 mm dia alongwith fittings and keeping in safe custody the serviceable items for reuse and removal of unserviceables items from site of work .

Supply & laying tubes, 'medium grade',galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, of following size :- 15 MM BORE.

Supply & laying tubes, 'medium grade',galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, of following size :- 20 MM BORE.

S&F 15mm bore/dia bib tap, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repairs 15 mm bore stop valve brass chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union fixed.

S&Fin repair stop valve 15 mm dia concealed type cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed in repairs.

S&F in repairs brass chromium plated shower rose of size 80mm with swivel joints fixed to 15mm bore pipe all as specified and directed.

S&F in repair vitreous china wash basin angle back size 600x480mm white, excluding taps, waste, chain and plug and chain porclain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand.

S&F in repair pillar taps, fancy type 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

S&F 32/40mm PVC waste pipe for wash hand basin, 600mm long complete all as specified and directed.

S & F stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws.

S&F aluminium anodised tubular towel rail, 20mm dia, 'D' type, 600mm long between flanges all as specified an directed.

S&F vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)complete all as specified and directed.

S&F cast iron 'P' or 'S' traps 100 mm bore of pipe.

S&F Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified

S&F 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float handle including brackets all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete.

M & L for 75 mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceilings etc all as specified and directed.

Material & labour for rendering 10 mm thick in CM 1:6 on brick works, concrete or similar surfaces finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering in two layers i.e. 10 mm thick (1:6) Ist coat and 5mm thick in CM (1:4) 2nd coat with water proofing compound @ (3% by weight of cement) on brick or concretes wall surfaces. Note:- WPC will be measured and paid separately.

M&L preparation of new plastered surface on walls and applying three coats of white wash complete all as specified and directed.

M&L preparation of new plastered surface on ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of washable acrylic distemper over a coat of chalk whitening complete.

M&L for preparation of new plastered or previously untreated external surfaces of walls and applying two coats of exterior emulsion paint in camouflage pattern over a coat of primer as approved by the GE, all as specified and directed .

M&L for preparation of plastered or unplastered old decorated external surfaces of walls and applying two coats of exterior emulsion paint in camouflage pattern as approved by the GE, all as specified and directed.

M&L for preparation of plastered or unplastered old decorated external surfaces of walls and applying one coat of exterior emulsion paint in camouflage pattern as approved by the GE, all as specified and directed .

M&L for preparation of old surfaces of wall including complete removal of existing treatment from wall and applying two coats of oil bound distemper over a coat of wall care putty all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint in camouflage pattern as approved by GE complete all as specified.

Dismantling of cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge 110 mm bore of pipe

All as per above but 75 mm bore pipe complete.

S&F 110 MM size UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors :- (Make : Astral type 'B' pipes or equivalent)

S&F 75 MM size UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors :- (Make : Astral type 'B' pipes or equivalent)

S&F of UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement of 110mm sizes :- (Make : Astral type 'B' pipes or equivalent)

S&F of UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement of 75 mm sizes :- (Make : Astral type 'B' pipes or equivalent)

S&F of UPVC sockets equal, ISI marked, IS-14735, jointed with solvent cement of sizes 110 MM (Make : Astral type 'B' pipes or equivalent)

S&F of UPVC sockets equal, ISI marked, IS-14735, jointed with solvent cement of sizes 75 MM (Make : Astral type 'B' pipes or equivalent)

S&F of UPVC bends equal of any radius with door, ISI marked, IS-14735, jointed with solvent cement for 75mm size pipes(Make : Astral type B pipes or equivalent of finolex/supreme

S&F of UPVC bends equal of any radius with door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes(Make : Astral type B pipes or equivalent of finolex/supreme

S & F rotational moulded polythene white water storage tank tripple layared (cylindrical , vertical with closed top , ISI marked , ) hoisted and fixed in position all as specd in SSR Part 1 of capacity 1000 ltrs including taking down existing tank also including provision of 20 mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum wt 455 gms)( Make of tank Sintex cat no CCWS 0075-02-TLW or equivalent of makes given in Appendix B to PS Make of ball valve Prayag or equivalent in polytuff as approved by GE

Demolition stone slabs and tiles of any description, laid bedded and pointed in any mortar.

S&F PVC/PTMT shelf fixed to walls with screws including necessary drilling holes. Make : Prayag cat No 190-C or equivalent of polytuf / pearl.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern) 'P' or 'S' type (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S & F for Vitreous China urinal, bowl type flat back, size 465X355X265mm white (minimum), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; (Excluding flushing cistern and waste pipe )

M&L for 100 mm thick PCC 1:2:4 type B-1 ( 20 mm graded aggregate) as in subbase of floors complete.

M&L for 100 mm thick PCC 1:2:4 type B-2 ( 40 mm graded aggregate) as in subbase of floors complete.

M&L for forming contraction (Dummy Joint) 65mm deep x 10mm wide filled with sealing compound grade A all as specified and directed.

M&L in repairs for 20mm thick granite, z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items, including rounding of exposed both edges, laid over 12mm thick bedding / rendering in cement mortar (1:3) and pointing with white cement(1:2) using marble dust with admixutre of pigment to match with shade of granite.

M&L Granite (Z Black) tiles 12 to 15mm thick machine cut, in vertical surfaces such as riser, skirting, dado, etc. including rounding edges, nosing, pointing on nose, etc., over and including 12mm thick screed bed in cement morter 1:3 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and as directed.

M&L for 75mm thick cement concrete type C2 1:3:6 using 40mm graded aggregate as in plinth protection finished even and smooth without using extra cement laid in bays complete all as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screw all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge fixed with self tapping screws as specified.

Demolition of Precast concrete block walling built in cement mortar

M&L for Precast cement concrete block masonary with solid blocks exc 10cm in width Type C1 (1:5:8) 20mm graded and setting in cement mortar 1:6 all as specified and directed

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good cutting not exceeding 10cm girth in brick walls complete.

Dismantling wall and ceiling boards, any thickness including cover fillets, grid work of any description

M&L for providing 12mm thick Gyp boards in ceilings, fixed to ceiling sections with screws @ 300mm centre to centre and makin good joints Gypsum binder fincluding prepaing the surfaces of ceiling boards and applying 2 coats of acrylic oil emulsion distemper with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screwas at 450mm centre to centre, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffits at approxly 900mm centre to centre with GI cleats, GI suspenders and steel expansion fasteners with and including ceiling section of 0.55mm thick having kurled web of 50mm and flange of 26mm each side with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre all as specified as directed.

M&L for false ceiling corners with designed angular shape of size 100x100mm with POP fixed on 6mm thick fibre board with 20x20mm, 0.55mm thick galvanised sections fixed at intervals not more than 750mm complete al as specified and directed by Engr-in-Charge.

M&L for false ceiling at all height of 600x600x15mm mineral fibre ceiling tiles of type micro looks edge laid on super fine XL 15mm exposed grid systems with 15mm wide T-section flanges. The frame work comprises of main runner of size 15x32x3000mm spaced at 1200mm centre securing fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers (GI wire of 4.0 mm dia) to be fixed by approved roof plug, level adjusters and screws etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall flush fitting 1200mm long cross tees of size 15x26x1200mm to interlocked between main runners at 600mm centers to form a 1200mmx600mm module. Cut cross tees longer than that 600mm to be supported independently 600mmx600mm modules to be formed by fitting 600mm long flush fitting cross tees of size 15x26x600mm centrally between the 1200mm cross tees perimeter wall angle of size 19x19x3000mm secured to wall at 450mm maximum centers. Finally mineral fibre tile 15mm thick micro look edge has to be laid on the 600mmx 600mm module.

M & L for 2nd class HW plain fillets square, rectangular or triangular in section clean sawn secured with nail or brads exceeding 3Sqcm but not exceeding 6Sqcm complete all as specified and directed.

M & L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality.

M&L for mild steel TMT bars 6 to 8 mm dia and over cut to length bent to shape and required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire n. less than .9mm dia or securing with clips complete.

M&L for providing precast reinforced cement concrete type A1, 1:1.5:3 using 20mm graded aggregate as in landings, cover slabs (for man holes etc) and similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match including use of necessary formwork and demolition / taking up of existing cover slabs & removing rubbish outside MD land.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

Taking down carefully aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as directed by EIC

Taking down ceiling fan / wall mounted Fan/Exhaust Fan of any size and sweep and refixing the same and connecting up including provision of cable from ceiling rose or connector to fan all as directed by EIC

Taking down old modular surface mounting boxes

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity complete all as specified and directed for :-

One light point controlled by one, one way modular switch single pole

One ceiling fan/Exhaust fan/ wall mounted Fan controlled by one, one way modular switch single pole

One 3 pin 5 Amps socket out let on independent board

One 3 pin 5 Amps socket out let on same board

All as per item No 94 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

S&F in replacement, modular switch flush type, 6 Amp. SP, one way ,1 module all as directed/ specified.

S&F in replacement modular switch, 16 Amp flush type 1 module all as directed/ specified.

M&L in replacement Modular socket 6A 5 pin 2 in 1 combined 2 module, 240 Volts.

M&L in replacement Modular socket 6/16A twin type 2 module, 240 Volts.

S&F in replacement modular white cover plate with frame of module 2 flush ISI marked all as specified and directed.

S&F in replacement modular white cover plate with frame of module 3 flush ISI marked all as specified and directed.

S&F in replacement modular white cover plate with frame of module 6 flush ISI marked all as specified and directed.

S&F in replacement modular white cover plate with frame 8 module ISI marked make - all as specified and directed.

S&F in replacement modular white cover plate with frame of module 12 ISI marked all as specified and directed.

S&F in replacement modular surface mounting plastic boxes 2 module all as specified and directed

S&F in replacement modular surface mounting plastic boxes 3 module all as specified and directed

S&F in replacement modular surface mounting plastic boxes 6 module all as specified and directed

S&F in replacement modular surface mounting plastic boxes 8 module all as specified and directed

S&F in replacement of ceiling fan regulator Modular Type electronic step type 5 step 360 deg, 120W, 2 module, Make Havells or equivalent make of Anchor,Polycab all as specified and directed by Engineer-in-Charge.

S&F in Replacement ceiling rose surface bakelite 65mm x 50mm three terminal all as specified and directed

Supply and fix in Replacement recessed mounting LED 2x2 luminaire with white acrylic flat light dissipater with LED light source of 36 Watt of size 2’x2’(Feet) square shape suitable for modular ceilingincluding cutting the existing false ceiling and fixing complete all as specified and as directed by Eng In Charge. Make : Havells Cat No.STRATO 2X2PLR36WLED840MOD or equivalent in equivalent in Bajaj/ Philips/CG/Orient/Polycab.

Supply and Fixing in replacement wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 20 W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells Cat No LUMILINEPLUSBS20WLED865SPCSS or equivalent in Orient/Philips/Bajaj/CG/Surya/Polycab all as directed by EIC.

Supply and Fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 20 W light source all as per Havells Cat no. ENDURAPEARLSL20WLED757SASYTOPCMP or equivalent in Orient/Philips/Bajaj/CG/Polycab including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers all as specified and directed by Engineer-in-Charge.

Removing and refixing Copper strip 20 x 3.15mm with saddles and fixing screws etc. for above ground all as specified and directed

M&L for Copper strip 20 x 3.15mm with saddles and fixing screws etc. for above ground all as specified and directed

Supply and Fixing of Stainless steel 304 Grade Plate Rack made of 1 mm thick stainless steel sheet, overall size 60cm x 90cm for 6 plates as approved by GE. Make: Prayag Cat No P-336 or nearest in Nirali, Neelkant as approved by GE

Supply and fixing including testing of storage type Water Heater/Geyser of vertical type of capacity 25 Ltr, Rated 2000W,230V, 50Hz Auto cutoff with a High tech adjustable thermostat,multifuction saftey valve,Magnesium anode Coated heating element, Rust Proof External Body with Unique Polymer protective coated inner Tank, Red and Green indicator lamp, Suitable for highrise building Suitable for water pressure head upto 8 bars Star rating (BEE): -5 Star,High Density & thick PUF that Ensures energy efficiency and reduced electricity bills ,15 Amps heavy duty plug complete all as specified and directed. Make: Racold or Equivalent in Venus/Crompton Greaves/Havells/MARC/ Bajaj Note:-The rate quoted shall be in including hanging of Geyser in wall with 2/4 nos of stainless steel fastner of suitable size no extra payment will be allowed to contractor in this regard.

Supply And Fixing CPVC pipes 20mm Dia SDR-11 & Plain CPVC SDR-11 with all fittings on wall/ceiling or Laying in Floor/Wall complete with proper Steel Saddling of Half Meter apart of each complete all as specified and directed.Make:-Astral/Supreme/Finolex

Supply And Fixing Quarter Turn Bib Cock With Flange,fancy type,cast Brass with Chrome Finish crutch or butterfly handle ,screwed down ,screwed for iron pipe/CPVC Pipe or for brass ferrule and fixed for size 15mm bore. Make:-Hindware or equivalent in Jaquar/Cera

Supply And Fixing Quarter turn Angle Cock With Flange 15 mm dia cast brass with Chrome finish plate screwed down high pressure,fancy type,with long shank and cup(connected type),screwed both ends for iron pipe/CPVC Pipe. Make:-Hindware or equivalent in Jaquar/Cera

Supply and fixing geyser PVC Connection 15mm size with PTMT Nuts of length 450mm long complete all as specified and directed. Make:-Cera or equivalent in Jaquar/Hindware/Prayag

Material and labour for point wiring from 8 Way DB to GEYSER Installed at bathroom complete with 2.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING&CAPPING INCLUDING accessories etc fixed to wall/ceiling including provision of 2.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire connected to common earth dolly including steel boxes of required switches/sockets ISI marked for one 15 Amps Independent socket controlled by 15 Amps switch all as Specified and directed by Engr-in-charge. Note:-Switch,socket, etc.shall be measured and paid separately.

S&F switch socket combination mounted on PVC surface mounting box 2 in 1, 6 pin 5 and 15 Amp flush type universal all as directed/ specified.

S&F MCB SP of 240 volts 5-40 Amps Capacity, 'C' series, 10 KA In existing Distribution board all as directed/ specified by Engr-in -Charge.

Supply and fixing steel rolling shutters, factory made, without ball bearing, with thickness of laths 1.25mm push and pull or manual type including top cover, anchoring rod, hasp and staple with one shop coat of red oxide or zinc staple with one shop coat of red oxide or zinc chrome primer and fixed in position in existing opening complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for PCC 1:3:6 type, C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete.

M&L for rendering 15mm thick on fair faces of brick work, or concrete surfaces without using extra cement in CM 1:4 on walls with water proofing compound complete. Note:-WPC will be measured and paid separately.

Supply only integral water proofing compound (ISI Marked).

M&L for reinforced cement concrete M-30 (Design mix) using 20mm graded stone aggregates as in beams, cantilevers, lintels and the like complete all as specified.

M&L for formwork to sides and soffits of suspended slabs such as roof slab, floor slabs landing horizontal or slopping and similar works thickness n.exc 200mm including necessary sufficient supports as directed by Engr-in-Charge etc for flat and rough finished surfaces of concrete etc complete.

S&F lead coated parition/ screen between operator and X-ray machine with lead quoted viweing glass 2.00mm (size 180 cm X 90 cm with 8 cm X 10cm glass window) all as specified and directed.

S&F 2.0mm thick lead sheet for door (size 200cm X 90cm) all as specified and directed.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

M&L preparation of old steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M/s Bombay Novelty Stores

M/s Pal Builders

Bhavik Construction