REPAIRS / REPLACEMENT OF JOINERY, FLOORING, FLY PROOFING, PLUMBING, TILING, ROOFING, FALSE CEILING AND MISC REPAIRS, INTERNAL ELECTRIFICATION INCLUDING FITTINGS AND FIXTURES AND OLD MCB DB, MCB EARTHING, SUB MAIN WIRING, SERVICE WIRE ALONGWITH CONNEC

Amount

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut Kota stone slab 20 mm to 25 mm thick , as in flooring with border, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish, over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed. (Note:- All exposed edges of kota stone flooring shall be finished as half round / bullnosed as directed and white marble strip border shall be provided to the pattern and design as approved).

M&L Granite slab 20mm thick machine cut, bedded and joined with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed.

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:5:8) (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of Old or New surface brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

Preparation of old decorated plastered or unplastered surfacesof wall including washing , rubbing down and stopping of distempered surface M&L for applying two coat of distemper oil emulsion paint white or tinted complete all as specified and as directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for non skid designer and concept ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, (300x300) in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and includin screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4 ) complete all as specified and directed.

M&L for ceramic designer tiles, joint free, coloured tiles( 400x400) 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and includin screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4 ) complete all as specified and directed.

M&LCeramic tiles 7 to 8 mm thick coloured tiles , each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm mm thick on vertical faces ie. as in skirting/dado including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M&L for glazed ceramic tiles, coloured tiles, 200mm x 300mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M&L for glazed ceramic designer and concept tiles,coloured tiles,jointless tiles 300 mm x 450 mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M & L for verified dark/ light shade ceramic designer tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm in floors and kirtings and dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4 ) complete all as specified and directed.

M & L for verified dark shade ceramic designer tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm kirtings and dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4 ) complete all as specified and directed.

M & L for chequred cement concrete tile 200 x 200 x 25mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry in path/ floor and includin screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4 ) complete all as specified and directed.

S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, hoisted and fixed Dismantling water tanks of any description and in any position , of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, hoisted and fixed in position complete all as specified and directed Dismantling water tanks of any description and in any position , of capacity exceeding 1000 litres but not exceeding 2000 litres complete all as specified and directed.

S&F Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed.

Taking up or down existing unserviceable mild steel water tubing and connections 15 mm dia, any grade, of any description or in any position including fittings complete S & F in repair unplastisized PVC pipe, 15mm dia (nominal) of pressure rating 10 per centimeter square complete with fittings and fixed to walls/ ceiling/floors etc in required length complete all as specified and directed all as specified and directed

Taking up or down existing unserviceable mild steel water tubing and connections 20mm dia, any grade, of any description or in any position including fittings complete S & F in repair unplastisized PVC pipe, 20 mm dia (nominal) of pressure rating 10 per centimeter square complete with fittings and fixed to walls/ ceiling/floors etc in required length complete all as specified and directed all as specified and directed

Taking up or down existing unserviceable mild steel water tubing and connections 25 mm dia, any grade, of any description or in any position including fittings complete S & F in repair unplastisized PVC pipe, 25 mm dia (nominal) of pressure rating 10 per centimeter square complete with fittings and fixed to walls/ ceiling/floors etc in required length complete all as specified and directed all as specified and directed

S&F PVC Valveless, syphonic action type,flushing cistern, low level, white,with inlet ball valve, float, handle, flush pipe 32 mm dia ( or for IWC 1.2 m height ), PVC connecting tube 15 mm dia with brass chuck nuts including brackets 10 ltrs capacity fixed in repairs

S&F in repairs tubular towel rail of brass chromium plated , 20 mm dia, D type, 60 cm long betweem flanges complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size with swivel joints including fixing to steel pipe or union complete all as specified and directed.

S&F in repair vitreous china urinals, bowl type flat back, as ordered , minimum size of 465 x 355 x 265 mm, white, with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (Pedestal pattern) white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete with provision of lime concrete bedding including & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S & F in repair Vitreuos china wash hand basin 550 x 400 mm incl cutting for and pinning in end of brackets or erecting stand, and inclusive of fixing and supply and waste pope and one CP pillare cock 15 mm dia , PVC connecting tube 15 mm dia with brash chuck nuts and CP waste coupling 32 mm dia complete all as specified and directed.

S & F grating square 150mm size of PTMT (minimum weight 100) complete all as specified and directed.

S&F in repair Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified .

S&F Stop valves, cast copper alloy, ISI marked ,screwed down high pressure with crutch of butter fly handle, fancy type , chromium plated,with long shank and cup, screwed both ends for iron pipes or for union , for 15 mm bore , , fixed in repair , complete all as specified and directed.

S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified

S & F Bib tap standard of PTMT high pressure bore/dia of pipe 15mm (Minimum weight 90gm) complete all as specified and directed.

S & F in repair stainless steel health faucet with 1 mtr tube and hook complete all as specified and directed.

S&F in repairs sinks with drainage board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs sinks or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to waste up to 0.5 sq m each complete all as specified and directed.

S & F in replacement stainless steel kitchen plate rack made out of 1.1 mm thick sheet of size 800 x 900 mm complete all as specified and directed.

M & L for Curtain rod, powder coated aluminum alloy of 20 to 25mm dia pipe decorative finish with fixed on walls with brass screws with PVC rawl plugs as in curtain rods fixed in repair complete all as specified and directed.

Hacking out old broken glass of any thickness and any description from metal frame including punching or drilling out old glazing pins/spring clips and providing and S&F 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each panecomplete all as specified and directed.

M&L mild steel in framed work [Fe-410-W (grade 250) quality A] as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing+B191complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for and S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240 with MS Bolts including washer and MS gusset plate any thickness etc Complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any guage of any description and in any position as in roof coverings including connected ridge and M & L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with L or J hooks Complete all as specified and directed.

M&L for false ceiling work of galvenised MS ceiling grid system 'UNLOCK" comprising of main runner 38mmx24mmx0.35mm cross tee 4mmx24mmx0.40mm and GI suspenders 8mm dia fixed to ceiling with and including supply and fixing mineral fibres acoustic ceiling board of size 600x600x12mm thick complete all as specified and directed and fixed as per manufacturers instructions including taking down existing ceiling of any discription and in any position and making good the disturb surfaces to match with the existing surfaces and finishes Complete all as specified and directed.

Repair to existing grid,GI suspenders etc and mineral fibres acoustic ceiling board fixing of eixsting grid and requred necessary material complted all as specified and directed.

Taking down existing wire mesh of any discription and in any position and supplying and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm (weight not less than 600 gms/per sqm) and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed

Taking down shutters of any description and in any position exceeding 2 sqm each complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position not exceeding 1.50 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.

Taking down existing chowkats or frames of any description and in any position exceeding 1.50 sqm but not exceeding 4 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.

S & F 30 mm thick factory made Flush shutters solid core construction with block board core and plywood face panels commenrcial face on both sides with lipping / frame to match with and including preparation of the surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F 30mm thick factory made IInd class hard wood (not less than Hollock wood) glazed and skelton shutters open rebated and prepare to receive glass / gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc {size of members of shutters as specified in clause 8.24 (a) of section 8 of SSR - I} supplied and fitted to chowkat complete all as specified and directed.

S&F factory made solid panel PVC wire gauzed door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail with and including panels of aluminimum wire gauzed Supplying and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm (weight not less than 600 gms/per sqm) and fixed with aluminium wire staples, The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rai ; Panelling of plain colour PVC sheet 5 mm thickness to be fitted in MS frame welded/sealed to the style and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F 100 mild steel butt hinges heavy weight ,cold rolled mild steel and fixed complete all as specified and directed.

S&F Aluminium alloy, anodised ,barrel tower bolts extruded aluminium 150mm long complete all as specified and directed.

S&F Aluminium alloy, anodised handles extruded fabricated type anodised 150mm long complete all as specified and directed.

S&F Aluminium alloy, anodised ,sliding door bolt 300mm long with hasp, staples (bolt type) and fixing clips of sheet, cast or extrudedsection and fixing bolts slinding of extruded section complete all as specified and directed.

S&F floor door stoper of aluminium alloy body of length 150mm and tounge, anodised, with hard drawn steel spring , fixed in floor complete all as specified and directed.

S & F Powder Coated anodised Aluminium alloy section sliding windows with framesseries -C ( 20 mm) , 3 track sliding shutters duly fited with neoprene beading , glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainlesss steel wite cloth 0.45 mm dia and average width of aperture 1.4 mm aluminum alloy handles etc. complete all as specified and direced Note :- Marking all edges i.g cill and jamb good by cement Mortar 1:3 complete all as specified and directed.

S& F Powder Coated aluminium anodised Ventilator with fixed aluminium frame of size 65 x40x1.98 mm thick fixed in vaertical position with aluminium vertical member and half portion to be provided with 4 mm thick pin head glass and remaining portion to be louvered using 4 mm thick pin head glass and louvered portion covered with stainlesss steel wire cloth 0.36 mm nominal dia of wite and average with of aperture 1.40 mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and directed.

S & F powder coated anodised Aluminium alloy door frame of Size 100 x 44x 1.98 mm thick with one or more rebaes and shutters pull and push type or side section 115x44x1.98 mm thik , bottom rail of section 150 x 44x1.98 mm thick and stiles of section 85x44x1.98 mm thick including necessary jointing cleat , glaxing clip, ruber packing anodized aluminium beading, screws, snodixed aluminium fittings such as floor spring or hinges 100 mm size with hydrolic door closer , handles 'D' type 125 mm foor door stoper tower bolts 200 mm sliding door boldts 300 mm or mortic lock with 5 mm thick tinted glasss/pre laminted particle board (Novapan) Panel and marking good to disturbed wall surfaces to match existing surface complete all as specified and directed.

M & L for powder coated aluminum grill of design No DG-104, 7.5mm thick sections of decogrill or of equivalent approved make with 1 mm thick 'F' sections of suitable size complete all as specified and directed.

M&L preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S & F in repair Steel Rolling shutter 1.25 mm thick ball bearing gear operated type with bevel gear box and crank handle including top cover, anchoring rod, haspe and staple and one shop primer, erected in position as indicated,with and including two coat of synthetic enamel Piant over a Coat of red oxide Primer complete all as specified and as directed

S & F Prelaminated particle board, exterior grade, prelaminated one side with decorative choce lamination & other side balancing white laimnation fixed with screws to timber frame work complete all as specified and as directed

M & L in Repair steel frame & shutter in builtup cupboard locking device, hinges ,fastener, handle etc including takingdown, welding of MS Sections complete all as specified and as directed. Note :- Two shutter per door of any Size.

Demolition of cement concrete in ground floors and paving n.exc 15cm thick (below or above ground level) and removing unserviceable materials from site to distance not exc 50M complete all as specified and as directed

M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in foundation of manholes, mass concrete etc. complete all as specified and as directed

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate 75 mm thick as in sub base complete all as specified and as directed

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate 50 mm thick as in sub base surface even and smooth without using extra cement complete all as specifed and directed.

S & F 60 mm thick, machine made, Ist quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles of triangular / zigzag / hexagonal / I in shape or shape and designe as approved with grey cement and pigment conforming to IS-15658-2006, M-35 grade laid over and including 25 mm thick sand cushioning and the voids shall also be filled with fine sand complete all as specified and directed.

Demolition of RCC of any description i.e column, beams, slab, chajja, kitchen shelves etc and in any position not otherwise specifically provided for complete all as specifed and directed.

S & F ball valves high pressure of PTMT with Epoxy coaed Aluminium rod & highdensity plastic ball screwed for iron pie and fixed (Minimum weight 20 mm -210 gms )etc complete all as directed

Tank Cleaning of PVC OR RCC Water Tanks 500 litrs to 1000 litr overhead water tanks and mentioning date of ceaning by paint including neccesary plumbing items like ball valves fixing with fitting as per site requirements completed all as per directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody ot for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping of adequate size fixed on surface with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- (A) One light/buzzer/fan/exhaust point controlled by one; one way switch. NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers

All as per Item No. 81 here in above but one 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

All as per Item No. 81 here in above but One 3 pin socket out let 5 amp point on the (same board) with other switches.

All as per Item No. 81 here in above but with 2.5sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit pipe of adequate size fixed on surface with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- (a) One light/buzzer/fan/exhaust point controlled by one; one way switch NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers

All as per Item No. 85 here in above but one 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

All as per Item No. 85 here in above but one 3 pin socket out let 5 amp point on the (same board) with other switches.

All as per Item No. 85 here in above but with 2.5sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

S&F switch flush type, 5/6 Amps, single pole, one way, 230 volts AC circuit complete all as specified and directed.

S & F Bell push, flush type 5 AMP AC 230 Volt single pole complete as specified.

S&F switch socket outlet five pin, 5 Amps, flush type, 230 volts AC circuit complete all as specified and directed.

S&F switch socket outlet combination, multipurpose, three pin, 15 Amps & three pin 5 Amps controlled by one switch , flush type, 230 volts AC circuit complete all as specified and directed.

S & F in repairs earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per all as specified and directed.

S & F buzzer, ding dong AC 230 Volt single pole complete as specified.

S&F fan regulator electronic, step type, suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified and directed.

S & F in replacement elegantly industrial general purpose box type luminaire, 1x20 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with electronic ballast, spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable for LED/CFL lamp fitting complete all as specified and directed.

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed.

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for MCB DB SPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed.

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for vertical type MCB DB TPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed.

Supply and fixing MCB TPN, 63 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces and M&L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 4 Sqmm drawn through PVC conduit/casing capping including accessaries with 2.5 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up complete all as specified and directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces and M&L for Sub main wiring with 4 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 4 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up complete all as specified and directed. Note: 4 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

M&L for repair to light fittings, sockets, switches and bell and in any type, make and capacity and in any position including replacing unserviceable item or replacing whole fixture, fittings complete all as specified and directed. Note : The unserviceable item should be paid separately

Supplying only choke suitable for and upto 18/20 W flouescent tube light fitting as per existing model complete all as specified and directed

All as per item No 110 here in before but of capacity for and upto 36/40 W flourescent tube light fitting

Supplying only flourescent tube rod 36/40 W as per existing model complete all as specified and directed

All as per item No 112 here in before but of capacity for and upto 18/20 W flourescent tube light fitting

Supplying only LED 18 W Rod suitable for 1*18 W LED fitting suitable suitable for existing make complete all as specified and directed

S & F in replacement LED mirror light for photo frame complete all as specified and directed

S & F decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base complete all as specified and directed

Supply and fix modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed

Supply and fix modular socket 16 Amps 2/3 pin combined 2 module complete all as specified and directed

Supply and fix modular fan regulator 120 W 2 module complete all as specified and directed

Supply and fix modular white cover plate with frame 8 module complete all as specified and directed

Supply and fix modular white cover plate with frame 6 module complete all as specified and directed

Supply and fix modular white cover plate with frame 3 module complete all as specified and directed

S & F in replacement LED spot (recessed) white light 15 W round type AC 90 - 260 volts including all accessories and fixing arrangement complete all as specified and directed

S & F in replacement LED spot (recessed) white light 12 W round type AC 90 - 260 volts including all accessories and fixing arrangement complete all as specified and directed

S & F in replacement LED spot (recessed) white light 6 W round type AC 90 - 260 volts including all accessories and fixing arrangement complete all as specified and directed

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed Note :- The retreived materials have been mentioned in the Sch of credit in the tender documents in pdf form. The amount of Sch of credit will be deducted offline from the amount of BOQ at the time of acceptance.

M/s Bombay Novelty Stores